Page 1
Digital Phosphor Oscilloscopes
TDS3012B •TDS3014B • TDS3032B •TDS3034B • TDS3052B •TDS3054B
The TDS3000B Series of Digital Phosphor
Oscilloscopes Provides Unmatched Performance
and Portability at an Affordable Price
The TDS3000B packs the power of
digital phosphor oscilloscope technology,
™
WaveAlert
OpenChoice
solutions with e*Scope
automatic anomaly detection,
™
documentation and analysis
®
web-based remote
control, and five application-specific modules
into a lightweight, battery-capable design.
DPO Technology Provides
a Greater Level of Insight
Into Complex Signals
DPO technology delivers superior insight
into complex signals with the ability to
display, store and analyze three dimensions
of signal information in real-time: ampli-
tude, time, and distribution of amplitude
over time. Fast waveform capture rates
make it easier to capture and display
infrequent waveforms or waveform varia-
tions, while the intensity graded display
helps you locate and characterize wave-
form anomalies that can be elusive on
traditional digital storage oscilloscopes.
Enhanced Troubleshooting
Ability
WaveAlert™waveform anomaly detection
speeds your troubleshooting tasks by
helping you find those elusive problems
faster. WaveAlert detection monitors the
incoming signals on all channels and will
detect and highlight any waveform that
deviates from the normal waveform being
acquired. Because the TDS3000B oscillo-
scope can stop acquisition, sound a beep,
make a hard copy or save the waveform
when it detects an anomaly, you can
run tests over long time periods – even
unattended – to find those challenging,
very infrequent failures.
Features & Benefits
500 MHz, 300 MHz,
and 100 MHz Bandwidths
Sample Rates up to 5 GS/s
2 or 4 Channels
Full VGA Color LCD
25 Automatic Measurements
9-Bit Vertical Resolution
FFT Standard
Multi-language User Interface
QuickMenu Graphical User
Interface for Easy Operation
™
WaveAlert
Waveform Anomaly Detection
OpenChoice™Solutions
Simplify Instrument Control,
Documentation and Analysis
– e*Scope®Web-based
Remote Control
– Built-in Ethernet Port
– GPIB, RS-232,
VGA Interfaces
– TDSPCS1 OpenChoice
Software
– WaveStar™Software
– Integration with
Third-party Software
Application Modules
for Specialized Analysis
– Advanced Analysis Module
– Limit Testing Module
– Telecommunications Mask
Testing Module
– Extended Video Module
– 601 Serial Digital
Video Module
Plug-in Printer for Portable
Documentation of Results
TekProbe™Interface Supports
Active, Differential and
Current Probes for Automatic
Scaling and Units
Automatic
™
Applications
Digital Design and Debug
Video Installation and Service
Power Supply Design
Education and Training
Telecommunications
Mask Testing
Manufacturing Test
General Bench Test
1
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
Page 2
Digital Phosphor Oscilloscopes
TDS3012B •TDS3014B •TDS3032B •TDS3034B •TDS3052B •TDS3054B
DPO technology shows modulation effects
on a power supply control loop.
Simple, Speedy
Documentation
and Analysis
OpenChoice™solutions deliver simple,
seamless integration between the oscilloscope
and the PC. Using a standard, built-in Ethernet
port, TDS3GV optional communication module,
floppy disk, TDSPCS1 OpenChoice software
and integration with third-party software,
and e*Scope web instrument control, the
TDS3000B Series provides you with multiple
choices to easily capture, transfer, document,
and analyze your measurement results. This
seamless integration extends the power
and value of these brilliantly engineered,
ultra-affordable oscilloscopes.
WaveAlert™waveform anomaly detection
alerts you to any waveform that deviates
from the “normal” input.
e*Scope®Web-based
Remote Control
e*Scope means you can control your
TDS3000B oscilloscope from anywhere,
using the Internet and your PC. Simply
connect the TDS3000B oscilloscope to your
LAN via its built-in Ethernet port, open
a browser window on your PC and enter
the TDS3000B oscilloscope’s IP address
in the Address window. The oscilloscope will
respond, allowing you to control it from your
browser. Download e*Scope control software
to your PC for a graphical interface that
displays the TDS3000B oscilloscope screen
and front panel controls for easy access.
Flexible Features
for Every Application
Optional application modules enable you to
transform your oscilloscope into a specialized
tool for limit testing, telecommunications
mask testing, and video troubleshooting.
And, with its lightweight, compact size and
Easily document and analyze measurement
results using OpenChoice
™
software.
battery pack, the TDS3000B Series oscillo-
scope can go wherever it is needed. It weighs
only 4.5 kilograms, with battery installed.
Use the optional plug-in thermal printer
to instantly document your work, even in
the field.
TDS3AAM Advanced Analysis Module – Adds
extended math capability, arbitrary math
expressions, measurement statistics and
additional automated measurements.
TDS3LIM Limit Testing Module – Offers fast,
accurate Go/No Go verification that tested
circuits are operating within intended
parameters.
TDS3TMT Telecommunications Mask Testing
Module – Pass/Fail compliance of
ITU-T G.703 and ANSI T1.102 standards,
custom mask testing and more.
TDS3VID Extended Video Editing Module –
Adds Video QuickMenu, autoset, holdoff,
line count trigger, video picture mode,
vectorscope mode, HDTV format triggering
graticules and more.
TDS3SDI 601 Serial/Digital Video Module –
Identify and analyze ITU-R BT.601 video
signals, video picture mode with bright line
select, vectorscope mode, HDTV format
triggering and more.
2
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
Page 3
Digital Phosphor Oscilloscopes
TDS3012B •TDS3014B •TDS3032B •TDS3034B •TDS3052B •TDS3054B
Look for unintentional circuit noise with the
TDS3000B Series’ FFT capability.
TDS3AAM Advanced Analysis module
delivers advanced waveform math.
The TDS3000B DPO with the TDS3LIM limit
testing module is ideal for manufacturing
test applications where fast Go/No-Go
decisions are required.
Characteristics
TDS3000B Series Electrical Characteristics
TDS3012B TDS3014B TDS3032B TDS3034B TDS3052B TDS3054B
Bandwidth 100 MHz 100 MHz 300 MHz 300 MHz 500 MHz 500 MHz
Channels 2 4 2 4 2 4
Sample Rate 1.25 GS/s 1.25 GS/s 2.5 GS/s 2.5 GS/s 5 GS/s 5 GS/s
on Each Channel
Maximum 10 K points on all models
Record Length
Vertical Resolution 9 Bits on all models
Vertical Sensitivity 1 mV – 10 V on all models
(/div)
Vertical Accuracy ±2% on all models*
Max Input 150 V
CAT I on all models (300 V CAT II with standard 10X probe)
RMS
Voltage (1 MΩ)
Position Range ± 5 div on all models
BW Limit 20 MHz 20 MHz 20, 150 MHz 20, 150 MHz 20, 150 MHz 20, 150 MHz
Input Coupling AC, DC, GND on all models
Input Impedance 1 MΩ in parallel with 13 pF or 50 Ω
Selections
Time Base Range 4 ns – 10 s/div 4 ns – 10 s/div 2 ns – 10 s/div 2 ns – 10 s/div 1 ns – 10 s/div 1 ns – 10 s/div
Time Base 20 ppm on all models
Accuracy
Display Monitor Color LCD
*1Requires TDS3AAM module.
1
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
3
Page 4
Digital Phosphor Oscilloscopes
TDS3012B •TDS3014B •TDS3032B •TDS3034B •TDS3052B •TDS3054B
TDS3000B DPO provides breakthrough test
speeds for telecommunications line card
testing. The telecom QUICKMENU puts all
the commonly used telecom testing functions on a single menu.
Acquisition Modes
DPO – Captures and displays complex waveforms,
random events and subtle patterns in actual signal
behavior. DPOs are able to provide 3 dimensions of
signal information in real time: Amplitude, time and
the distribution of amplitude over time.
Peak Detect – High frequency and random glitch
capture. Captures glitches as narrow as 1 ns.
™
WaveAlert
– Monitors the incoming signals
on all channels and alerts the user to any waveform that deviates from the normal waveform
being acquired.
Sample – Sample data only.
Envelope – Max/Min values acquired over one or
more acquisitions.
Average – Waveform data from 2 to 512
(selectable) acquisitions is averaged.
Single Sequence – Use the Single Sequence
button to capture a single triggered acquisition
sequence at a time.
Custom video trigger allows the TDS3000B
to trigger on standards such as RS343
(26.6 kHz scan rate).
Trigger System
Main Trigger Modes – Auto (supports Roll Mode
for 40 ms/div and slower), Normal.
B Trigger – Trigger after time or events.
Trigger After Time Range – 13.2 ns to 50 s.
Trigger After Events Range – 1 to
9,999,999 events.
External Trigger Input – >1 MΩ in parallel with
17 pF; Max input voltage is 150 V
Trigger Types
RMS
.
Edge – Conventional level-driven trigger. Positive or
negative slope on any channel. Coupling selections:
DC, noise reject, HF reject, LF reject.
Video – Trigger on all lines, odd/even or all fields.
With TDS3VID or TDS3SDI trigger on individual
lines and on analog HDTV formats (1080i, 1080p,
720p, 480p).
Trace and identify ITU-R BT.601 video
signals with the TDS3SDI 601 serial digital
video module.
Logic –
PATTERN: Specifies AND, OR, NAND, NOR when true
or false for a specific time.
STATE: Any logic state. Triggerable on rising or
falling edge of a clock. Logic triggers can be used
on combinations of 2 inputs (not 4).
Pulse –
WIDTH (or GLITCH): Trigger on pulse width less than,
greater than, equal to or not equal to a selectable
time limit ranging from 39.6 ns to 50 s.
RUNT: Trigger on a pulse that crosses one threshold but fails to cross a second threshold before
crossing the first again.
SLEW RATE: Trigger on pulse edge rates that are
either faster or slower than a set rate. Edges can
be rising, falling or either.
Comm (Requires TDS3TMT) – Provides isolated
pulse triggering required to perform DS1/DS3
telecommunications mask testing per ANSI T1.102
standard.
Alternate – Sequentially uses each active channel
as a trigger source.
4
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
Page 5
Digital Phosphor Oscilloscopes
TDS3012B •TDS3014B •TDS3032B •TDS3034B •TDS3052B •TDS3054B
Measurement System
Automatic Waveform Measurements –
Period, Frequency, +Width, –Width, Rise Time,
Fall Time, +Duty Cycle, –Duty Cycle, +Overshoot,
–Overshoot, High, Low, Max, Min, P-P,Amplitude,
Mean, Cycle Mean, RMS, Cycle RMS, Burst Width,
Delay, Phase,Area*
1
, Cycle Area*1.
Display any four measurements from any combination of waveforms. Or display all measurements
with measurement snapshot feature.
Thresholds – Settable in percentage or voltage.
Gating – Measurements can be gated using the
screen or vertical cursors.
Waveform Processing
Deskew – Channel-to-channel deskew ±10 ns may
be manually entered for better timing measurements
and more accurate math waveforms.
Arithmetic Operators – Add, subtract,
multiply, divide.
Autoset – Single-button, automatic setup on
selected input signal for vertical, horizontal
and trigger systems.
Display Characteristics
Waveform Style – Dots, vectors and
variable persistence.
Graticules – Full, grid, cross-hair, frame, NTSC,
PAL, SECAM, vectorscope 100% and 75% color
bars (with optional TDS3VID and TDS3SDI video
application modules).
Format – YT, XY and Gated XYZ (XY with Z-axis
blanking available on TDS30X4B only).
*1Requires TDS3AAM module.
I/O Interface
Hard Copy Port (standard) – Centronicstype parallel.
Ethernet Port (standard) – 10Base-T LAN,
RJ-45 female.
TDS3GV Communications Module –
GPIB (IEEE -488.2) programmability: Full talk/
listen modes; Control of all modes, settings
and measurements.
VGA: Monitor output for direct display
on large VGA-equipped monitors. DB-15
female connector, 31.6 kHz sync rate,
EIA RS-343A compliant.
RS-232-C interface programmability: Full talk/
listen modes; Control of all modes, settings and
measurements. Baud Rate up to 38,400.
DB-9 male connector.
Programmer manual: 071-0381-02.
Hard Copy Capability
Graphics File Formats – Interleaf (.img), TIF,
PCX (PC Paintbrush), BMP (Microsoft Windows)
and Encapsulated Postscript (EPS).
Printer Formats – Bubblejet, DPU-3445, Thinkjet,
Deskjet, Laserjet, Epson (9- and 24-Pin).
Environmental and Safety
Temperature – +5 ºC to +50 ºC (operating),
–20 ºC to +60 ºC (nonoperating).
Humidity – 20% to 80% RH below 32 ºC,
derate to 30% RH at 45 ºC (operating), 5% to
90% RH below 41 ºC, derate to 30% RH at
60 ºC (nonoperating).
Altitude – To 3,000 m (operating), 15,000 m
(nonoperating).
Electromagnetic Compatibility – Meets or
exceeds EN55011 Class A radiated and conducted
emissions; EN50082-1; FCC 47 CFR, Part 15,
Subpart B, Class A; Australian EMC framework;
Russian GOST EMC regulations.
Safety – UL3111-1, CSA1010.1, EN61010-1,
IEC61010-1.
Physical Characteristics
INSTRUMENT
Dimensions mm in.
Width 375.0 14.8
Height 176.0 6.9
Depth 149.0 5.9
Weight kg lbs.
Instrument only 3.2 7.0
w/battery installed 4.5 9.8
INSTRUMENT SHIPPING PACKAGE
Dimensions mm in.
Width 502.0 19.8
Height 375.0 14.8
Depth 369.0 14.5
RACKMOUNT
Dimensions mm in.
Width 484.0 19.0
Height 178.0 7.0
Depth 152.0 6.0
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
5
Page 6
Digital Phosphor Oscilloscopes
TDS3012B •TDS3014B •TDS3032B •TDS3034B •TDS3052B •TDS3054B
Ordering Information
TDS3012B, TDS3014B,
TDS3032B, TDS3034B,
TDS3052B, TDS3054B
Standard Accessories
Probes: 2 each P3010 10X passive probes
(TDS3012B), 4 each P3010 10X passive probes
(TDS3014B), 2 each P6139A 10X passive probes
(TDS3032B and TDS3052B), 4 each P6139A
10X passive probes (TDS3034B and TDS3054B).
Documentation: User manual (hard copy and CD),
quick reference manual, programmer’s manual,
and application module manuals.
Power cord.
Accessory tray.
Protective front cover: Has holder for user manual
and/or 3.5 in. floppy disks.
NIST-Traceable Certificate of Calibration.
Please specify power plug and manual version
when ordering.
Recommended Option
Option BND – Available on all TDS3014B,
TDS3034B and TDS3054B models.
Includes TDS3GV communication module with
OpenChoice
application modules, TDS3BATB battery pack
and AC3000 soft carrying case.
Recommended Accessories
TDS3TMT – Telecom mask testing
application module.
TDS3AAM – Advanced analysis module.
TDS3LIM – Limit test module.
TDS3VID – Extended video application module.
TDS3SDI – 601 serial digital video module.
TDS3GV – GPIB, VGA, RS-232
interfaces, and TDSPCS1 OpenChoice
PC Communication software.
™
software, TDS3AAM and TDS3LIM
™
™
TDSPCS1 OpenChoice
PC Communication
Software – A collection of programs that enable
fast and easy transfer communication between MS
Windows PCs and Tektronix oscilloscopes. Available
in single-license packages and included in TDS3GV
communication module.
Minimum System Requirements:
500 MHz Pentium equivalent or greater
128 MB
MS Windows 98 SE, XP Professional,
Me or 2000
MS Office 2000 or XP (for TDS toolbars
only) – Excel 2000 or 2002; Word 2000
or 2002
Keyboard and mouse
LAN, GPIB or serial connector
™
WaveStar
Software for Oscilloscopes –
Microsoft Windows 98/Me/2000/NT 4.0
Application.
TDS3BATB – Lithium Ion battery pack for up to
3 hours continuous operation without line power.
Note: The instrument must be grounded
at all times.
TDS3PRT – Plug-in printer adds easy, portable
documentation capability to your TDS3000B
or TDS3000 oscilloscope.
Note: Printer operates on battery power only with
TDS3000B Series oscilloscope.
016-1907-00 – 5-roll pack of paper for TDS3PRT
plug-in thermal printer.
TDS3CHG – Fast charger for battery pack.
AC3000 – Soft case for carrying instrument.
HCTDS32 – Hard plastic case for carrying
instrument.
RM3000 – Rackmount kit.
Service Manual (TDS3000B Series) – English
only (071-0972-00).
TDS3GV Programmers Manual – English only
(071-0381-01).
TNGTDS01 – Self-paced self-study operator
training kit.
For customer training on this product outside
the U.S. call 1-503-627-7510, inside the U.S.
call 1-800-833-9200 ext. 77510.
Recommended Probes
ADA400A – 100X, 10X, 1X, 0.1X high gain
differential amplifier.
P6243 – 1 GHz, ≤1 pF input C 10x active probe.
P5205 – 1.3 kV, 100 MHz high voltage differential
probe.
P5210 – 5.6 kV, 50 MHz high voltage differential
probe.
P5100 – 2.5 kV, 100X high voltage passive probe.
TCP202 – 15 A, DC + peak AC 50 MHz AC/DC
current probe.
6
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
Page 7
Digital Phosphor Oscilloscopes
TDS3012B •TDS3014B •TDS3032B •TDS3034B •TDS3052B •TDS3054B
Battery pack being installed. The TDS3000B
oscilloscope weighs only 4.5 kilograms with
battery pack.
International Power Plugs
Opt. A0 – North America power.
Opt. A1 – Universal EURO power.
Opt. A2 – United Kingdom power.
Opt. A3 – Australia power.
Opt. A5 – Switzerland power.
Opt. A6 – Japan power.
Opt. A10 – China power.
Plug-in printer provides instant, portable
documentation of your work.
Language Options
(includes front panel overlay)
Opt. L0 – English.
Opt. L1 – French.
Opt. L2 – Italian.
Opt. L3 – German.
Opt. L4 – Spanish.
Opt. L5 – Japanese.
Opt. L6 – Portuguese.
Opt. L7 – Simplified Chinese.
Opt. L8 – Traditional Chinese.
Opt. L9 – Korean.
Opt. LR – Russian.
Tektronix probes are expressly designed
for your oscilloscope, with identical quality
standards and built-in compatibility for
optimum performance.
Service
Opt. C3 – Calibration Service 3 Years.
Opt. C5 – Calibration Service 5 Years.
Opt. D1 – Calibration Data Report.
Opt. D3 – Calibration Data Report 3 Years
(with Option C3).
Opt. D5 – Calibration Data Report 5 Years
(with Option C5).
Warranty
Three year warranty covering all labor and parts,
excluding probes.
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
7
Page 8
Digital Phosphor Oscilloscopes
TDS3012B • TDS3014B • TDS3032B • TDS3034B • TDS3052B • TDS3054B
A Critical Component of the
Complete Measurement Solution.
The AFG300 Series arbitrary function
generator pairs with the TDS3000B,
TDS2000 and TDS1000 Series digital
oscilloscopes to deliver the two elements
of a complete measurement solution –
stimulus and acquisition. This instrument
combines the capabilities of a function
generator with the power of an arbitrary waveform generator, offering the performance needed to accurately
verify, validate and characterize designs with ease and confidence at a price you can afford.
Tektronix Support Completes the
Solution.
Tektronix instrument solutions when
you make and meet critical commit-
ments. So we make and meet a sup-
port commitment you can depend on.
Anytime you need support, anywhere
in the world, Tektronix Support gives
you the lowest possible exposure to
inconvenience, delay or disruption
of operations.
– Unsurpassed technical expertise and
– Interactive, online support to request assistance, check service status or arrange for training
– Industry-leading, turn-around service time
– Credible, reliable support with demonstrated on-time delivery
– 90-day unconditional service warranty
– No fine print, no exclusions, no surprises
– Global support in more than 50 countries
Depend on Tektronix. Visit www.tektronix.com/support
We know you depend on
experience with 24-hour response to technical questions
Contact Tektronix:
ASEAN / Australasia / Pakistan (65) 6356 3900
Austria +43 2236 8092 262
Belgium +32 (2) 715 89 70
Brazil & South America 55 (11) 3741-8360
Canada 1 (800) 661-5625
Central Europe & Greece +43 2236 8092 301
Denmark +45 44 850 700
Finland +358 (9) 4783 400
France & North Africa +33 (0) 1 69 86 80 34
Germany +49 (221) 94 77 400
Hong Kong (852) 2585-6688
India (91) 80-2275577
Italy +39 (02) 25086 1
Japan 81 (3) 3448-3010
Mexico, Central America & Caribbean 52 (55) 56666-333
The Netherlands +31 (0) 23 569 5555
Norway +47 22 07 07 00
People’s Republic of China 86 (10) 6235 1230
Poland +48 (0) 22 521 53 40
Republic of Korea 82 (2) 528-5299
Russia, CIS & The Baltics +358 (9) 4783 400
South Africa +27 11 254 8360
Spain +34 (91) 372 6055
Sweden +46 8 477 6503/4
Taiwan 886 (2) 2722-9622
United Kingdom & Eire +44 (0) 1344 392400
USA 1 (800) 426-2200
USA (Export Sales) 1 (503) 627-1916
For other areas contact Tektronix, Inc. at: 1 (503) 627-7111
Updated 20 September 2002
Our most up-to-date product information is available at:
www.tektronix.com
Product(s) are manufactured
in ISO registered facilities.
Copyright © 2003, Tektronix, Inc.All rights reserved. Tektronix products are covered
by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specification and price change
privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix,
Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies.
09/03 HB/SFI 3GW-12482-10
8
Digital Phosphor Oscilloscopes • TDS3000B Series
•
www.tektronix.com/tds3000b
Loading...