Atec Single User Manual
Precision PIM Analyzer for Production
and Laboratory.
True continuous 24/7 operation.
3 Measurement Modes: PIM Analyzer,
PIM over Time, PIM over Frequency
(Frequency Sweep).
Forward & Reverse PIM
Measurements (2-port).
One unit holds the complete PIM
Analyzer system.
Information Technology Solutions
Passive Intermodulation (PIM) analyzers measure the
amount of unwanted intermodulation signals that are
generated by passive components during RF
transmission. Increasing demand for wireless data
capacity mandates optimally performing, high quality
network elements. Wireless carriers use exclusively high
quality, low PIM components to ensure optimal
performance of their networks - today and in the future.
PIM is caused by RF components that show non-linear
frequency behavior. Even the most careful production
process can introduce PIM. Therefore, every single
component has to be tested. It is paramount for
manufacturers to minimize PIM during both, the design
phase and the production process.
RF Components that may cause PIM:
Cables
Connectors
Antennas
Attenuators, Loads
Surge Protectors
Filter, Diplexers, Duplexers
Combiners, Splitters, Couplers
AWT’s PIM Analyzers are ideal for production and
laboratory. These instruments are very accurate, yet
highly reliable and built for true continuous 24/7
operation. The compete measurement system
consists of only one unit, making set-up easy and
operation convenient.
With the introduction of new wireless technologies like
LTE and LTE-A, network operators demand RF
components that offer excellent PIM characteristics.
AWT’S PIM Analyzers are well suited for this task.
With -127dBc sensitivity, our analyzers detect all PIM
issues of tested RF components. Engineers
appreciated the high accuracy over 100% of the IM
measurements.
RF & M IC RO W AVE
TE CH NO LOG Y
AWT-Global provides
advanced telecommunication
technology products and
analyzers for a variety of RF
and Microwave applications.
PI M AN ALYZERS F OR
PR ODUCTIO N AN D LA B
Production testing requires fast
and highly reliable PIM
analyzers. Our systems are
used at many manufacturing
sites around the world.
OTHER PIM
ANAL YZERS
AWT - Global offers also
Expandable Multi Band PIM
Analyzers ( 1-4 channels) and
Portable PIM Testers.
PIM Analyzer - Single Band
A
A
A
W
W
W
T
T
T
G
G
G
l
l
l
o
o
o
b
b
b
a
a
a
l
l
l
Advanced Microwave
Technology
Dual band analyzer shown
Data sheet is subject to change without further notice
A
A
A
W
W
W
T
T
T
G
G
G
l
l
l
o
o
o
b
b
b
a
a
a
l
l
l
Advanced Microwave
Technology
Model Number / Type
Tx Frequency (MHz)
Rx Frequency (MHz)
TETRA 400
390 ~ 400
380 ~ 384
E-TETRA400
420 ~ 430
410 ~ 412
LTE700-U
730 ~ 759
776 ~ 788
LTE700-L
728 ~ 759
698 ~ 716
CDMA
869 ~ 896
824 ~ 851
GSM900
935 ~ 960
890 ~ 915
LTE-JP1500
1488 ~ 1520
1456 ~ 1480
DCS/GSM1800
1805 ~ 1880
1710 ~ 1785
PCS1900
1930 ~ 1990
1850 ~ 1910
AWS
2010 ~ 2155
1710 ~ 1755
TD-SCDMA(2000)
2010 ~ 2025
1900 ~ 1920
UMTS/W-CDMA
2110 ~ 2170
1920 ~ 1980
W-CDMA-JP
2150 ~ 2170
2110 ~ 2140
IMT-E(2600)
2620 ~ 2690
2500 ~ 2570
WiBro-KR
2110 ~ 2170
2300 ~ 2390
1910 ~ 1990
Accessories
Opt. 2
Accessory Kit: (2) low PIM cables 3m / 10ft, (1) low PIM cable 1m /
3ft, low PIM load 100W, adapters, torque wrench with hard carry case
Opt. 3
Low PIM Load 100W, < 165 dBc @ 2* 43W, DIN 7/16 (f)
Opt. 4
PIM Source: Generator with preset PIM value. Quick indication and
system test.
PR ODUCT Q UALITY
AWT is committed to providing
our customers with products
meeting the highest quality
standards. All AWT products
undergo thorough quality
checks and are ISO 9001 and
ISO 14001 certified.
MORE INFORMATI ON
For more information about
any of our products or services
please visit our Web site:
www.awt-global.com
or contact one of our sales
offices.
Transmitter
Carrier Power
+20 to +44 dBm
(46 dBm optional)
Power Accuracy
+/- 0.35 dB
Frequency Accuracy
200 ppm
Reverse Pwr. Protection
+43 dBm for 5 sec
Dimensions / Weight / Environment / Electrical
Dimensions
All Units
(except. E-GSM)
E-GSM
488 x 659 x 278 (mm)
488 x 719 x 278 (mm)
Weight
All Units
(except. E-GSM)
E-GSM
35 kg
36 kg
Temperature
-10 °C to +40 °C
Humidity
80%, RH (non
condensing)
Protection
IP20 (indoor use)
AC Power
100 to 240V 50/60 Hz
Power Consumption
750 Watts (VA) max
Models / Types
Specifications
Receiver
Reverse IM @ 2x43dBm
Forward IM @ 2x43dBm
-129 dBm / -172 dBc typ.
-125 dBm / -168 dBc typ.
Noise Floor
-140 dBm (300 Hz BW)
Dynamic Range (typical)
> 96 dB (ref: -70 dBm)
Reverse Power
Protection
+43 dBm for 5 sec
Operational Input Power
-40 dBm RMS
Max Input Power
-10 dBm
Measurement Accuracy
+/- 0.2 dB @ 2 x 43 dBm
Warm-up Time (for full
measurement accuracy)
10 mins
SALE S OFF ICES
AWT-Global New Jersey
117 Grand Avenue
Hackettstown
New Jersey 07840, USA
p: +1 (973) 321-3423
e: sales@awt-global.com
AWT-Global Nevada
11309 Asilo Bianco Avenue
Las Vegas
Nevada 89138, USA
p: +1 (702) 358-0290
e: thomas.lee@awt-global.com
Data sheet is subject to change without further notice
Loading...