Atec FW-Bell-8030 User Manual
Hall effect gaussmeters
Gauss/Tesla meter
Model 8030
For more than 60 years, F.W. Bell
has been recognized for
leadership in Gauss Meters.
Today, F.W. Bell is building on that
heritage with our new sixth
generation of single, Model 8010
and three channel, Model 8030
Gauss Meters.
The Model 8030 three channel GAUSS TESLA METER from F.W. Bell leads the way for
Advanced Hall Effect Magnetic measurement technology. The easy to use front panel
programming feature incorporates the latest in user control operations. The 8030 is
capable of measuring and displaying seven different parameters per channel – flux
density, frequency, temperature, min, max, peak and valley. With the 8030’s vector
summation feature, that makes a total of 27 different parameters.
This high accuracy instrument if fully equipped to meet most magnetic measuring
application needs. Bell’s dynamic probe correcting software increases the 8030
measurement capabilities to make versatile magnetic measuring tool in the world.
Key features include high resolution, high accuracy and high speed with a large TFT color
LCD display with backlighting. The 8030 features 50 kHz frequency response, temperature
and frequency measurements, Auto Zero, Auto Range, Hold functions for Peak Valley, Min
and Max, corrected and uncorrected outputs for each channel and Vector Summation
and angle. The Model 8030 provides the user with gauss, tesla, Oe, A/m, IEEE-488, RS-232,
Ethernet RJ-45 and USB communications ports and Classifier output.
The 8030 operates with Bell’s sixth generation Hall effect probes. These probes provide
temperature compensation and measurement readings (0˚C to +50˚C) while monitoring
the magnetic field. The easy to read TFT Color LCD with Backlighting is easily viewable in
most light conditions and can be customized to meet use’s specific needs. Applications
range from basic magnetic measuring to sensitive complicated three axis vector summing
requirements. The F.W. Bell Model 8030 is fully CE compliant.
Features
●Bright color Readout ●Fully menu driven for easy operation
●Large graphic color display ●Auto Zero and Auto Calibration
●Several probes available ●IEEE-488 and RS-232 interface
●Automatic probe coefficient ●CE Compliant
correction
●Displays in Gauss, Tesla, ●Manufactured to ISO 9000 standards
A//m or Oe
●Relative Mode ●Comprehensive Technical Support
Power
Conversion
Power
Generation
Sensors
Key features
• TFT Color LCD Display with
Backlighting
• WVGA, 600 x 480 pixels
• Over 40 standard probes
available
• Three channels
• Automatic probe coefficient
correction
• Displays in Gauss, Tesla,
amp/meter or Oe
• Relative mode
• Fully menu-driven for easy
operation
• Auto zero and auto
calibration
• IEEE-488, RS-232, Ethernet RJ-
45 and USB interface
• CE-compliant
• Manufactured to IS0 9000
standards
• Comprehensive technical
support
Pacific Scientific OECO
Our product competencies and services: Aerospace valves | Thermal management solutions | Environmental control systems | Electro-mechanical products Ground fueling products |
Industrial fluid controls | Aftermarket services
Hall effect gaussmeters
Gauss/Tesla meter
Model 8030
Power
Conversion
Power
Generation
Sensors
Specifications
Ranges
*Low field probe
† High field probe
Resolution 1
Accuracy
(Displayed reading)
Frequency range
Accuracy
(Corrected analog output)
Frequency range
(Uncorrected analog output)
Analog output
Additional influences Temperature
Temperature range
Front panel display WVGA, 600 x 480 pixels, TFT Color LCD Display with
Communication ports
Power Volts: 100/120 or 220/240
Size
Weight
DC basic
AC basic
DC mode
AC mode
DC basic
AC basic
Frequency range
DC mode
AC mode
Output voltage
Source impedance
Connector
coefficient
Operating
Storage
RS-232
Baud rate
IEEE-488
Protocol
Protocol
Ethernet
USB
Width
Height
Depth
Net
Shipping
300mG (30µT)* 3kG(300mT)
3G (300µT)* 30kG (3T)
30G (3mT) 300kG(30T)†
300G (3OmT)
µG (0.1nT) to 1G (0.1mT) {Dependent on Probe
Type Used}
±0.05% of reading
±2% of reading
dc to 250Hz
10Hz to 50kHz
±0.1% of range
±2% of range
dc to 500Hz
dc to 100Hz
20Hz to 50kHz
±3V FS. or ±10V F.S. or adjustable from 0.1 – 9.9V
<100 ohms
Standard female BNC
±(0.02% of reading ±1 count)/°C
0°C to +50°C
-20°C to +60°C
Backlighting. (6.5" diagonal viewing area)
Standard 9-pin female "D" connector
300,600,1200,2400,4800,9600,19200,38400,
57600,115200 bits/sec
Standard 24-pin GPIB connector Protocol
IEEE-1987.2 and SCPI-1999
IEEE-802.3u Data Link Layer & TCP/IP Transport &
Network Layer
Standard RJ-45 connector
Version 1.1 full speed
Frequency: 50-60 Hz or 50-60 Hz
Current: 1.O A (max) or 0.5 A (max)
11.5” (292mm)
5.2” (132mm)
14.5” (368mm)
11.5lbs (5.3kg)
17.7 lbs (8.1kg)
Contact
Pacific Scientific-OECO
4607 SE International Way
Milwaukie, OR 97222
1 (503) 659-5999
www.oeco.com
Pacific Scientific OECO
Our product competencies and services: Aerospace valves | Thermal management solutions | Environmental control systems | Electro-mechanical products Ground fueling products |
Industrial fluid controls | Aftermarket services
Loading...