Atec FW-Bell-8010 User Manual
Hall effect gaussmeters
Power
Conversion
Power
Generation
Sensors
Gauss/Tesla meter
Model 8010
For more than 60 years, F.W. Bell
has been recognized for
leadership in Gauss Meters.
Today, F.W. Bell is building on that
heritage with our new sixth
generation of single, Model 8010
and three channel, Model 8030
Gauss Meters.
(Picture of Model 8030 for illustration only)
The Model 8010 single-channel GAUSS TESLA METER from F. W. Bell leads the way for
advanced Hall Effect magnetic measuring technology. The easy-to-use front panel
programming feature incorporates the latest in user control operations. And the 8010 is
capable of measuring and displaying seven different parameters, including flux density,
frequency, temperature, min, max, peak and valley.
This high accuracy instrument is fully equipped to meet most magnetic measuring
applications. Bell's dynamic probe correcting software increases the 8010 measurement
capabilities to make it the most versatile magnetic measuring tool in the world.
Key features include high-resolution, high-accuracy and high-speed with a large TFT color
LCD display with backlighting. The 8000 features 50 kHz frequency response, temperature
and frequency measurements, auto zero, auto range, hold functions for peak, valley, min
and max, corrected and uncorrected outputs. The Model 8010 provides the user with
gauss, tesla, Oe, A/m, IEEE-488, RS-232 , Ethernet RJ-45 and USB communications ports and
classifier output.
The 8010 operates with Bell's sixth generation Hall effect probes. These probes provide
temperature compensation and measurement readings (0°C to +70°C) while monitoring
the magnetic field. The easy-to-read TFT Color LCD with Backlighting is easily viewable in
most light conditions and can be customized to meet a user's specific needs. Applications
range from basic magnetic measuring to sensitive complicated three-axis vector summing
requirements. The F.W. Bell Model 8010 is fully CE-compliant.
Key features
• TFT Color LCD Display with
Backlighting
• WVGA, 600 x 480 pixels
• Over 40 standard probes
available
• Automatic probe coefficient
correction
• Displays in Gauss, Tesla,
amp/meter or Oe
• Relative mode
• Fully menu-driven for easy
operation
• Auto zero and auto
calibration
• IEEE-488, RS-232, Ethernet RJ-
45 and USB interface
• CE-compliant
• Manufactured to IS0 9000
standards
• Comprehensive technical
support
Pacific Scientific OECO
Our product competencies and services: Aerospace valves | Thermal management solutions | Environmental control systems | Electro-mechanical products Ground fueling products |
Industrial fluid controls | Aftermarket services
Hall effect gaussmeters
Gauss/Tesla meter
Model 8010
Power
Conversion
Power
Generation
Sensors
Specifications
Ranges
*Low field probe
† High field probe
Resolution 1
Accuracy
(Displayed reading)
Frequency range
Accuracy
(Corrected analog output)
Frequency range
(Uncorrected analog output)
Analog output
Additional influences Temperature coefficient ±(0.02% of reading ±1 count)/°C
Temperature range
Front panel display WVGA, 600 x 480 pixels, TFT Color LCD Display with
Communication ports
Power Volts: 100/120 or 220/240
Size
Weight
Note: Due to continuous process improvement, specifications subject to change without notice
DC basic
AC basic
DC mode
AC mode
DC basic
AC basic
Frequency range
DC mode
AC mode
Output voltage
Source impedance
Connector
Operating
Storage
RS-232
Baud rate
IEEE-488
Protocol
Protocol
Ethernet
USB
Width
Height
Depth
Net
Shipping
300mG (30µT)* 3kG(300mT)
3G (300µT)* 30kG (3T)
30G (3mT) 300kG(30T)†
300G (3OmT)
µG (0.1nT) to 1G (0.1mT) {Dependent on Probe
Type Used}
±0.05% of reading
±2% of reading
dc to 250Hz
20Hz to 50kHz
±0.1% of range
±2% of range
dc to 500Hz
dc to 100Hz
10Hz to 50kHz
±3V FS. or ±10V F.S. or adjustable from 0.1 – 9.9V
<100 ohms
Standard female BNC
0°C to +50°C
-20°C to +60°C
Backlighting. (6.5" diagonal viewing area)
Standard 9-pin female "D" connector
300,1200,2400,4800,9600,19200,38400,
57600,115200 bits/sec
Standard 24-pin GPIB connector Protocol
IEEE-1987.2 and SCPI-1999
IEEE-802.3u Data Link Layer & TCP/IP Transport &
Network Layer
Standard RJ-45 connector
Version 1.1 full speed
Frequency: 50-60 Hz or 50-60 Hz
Current: 1.O A (max) or 0.5 A (max)
11.5” (292mm)
5.2” (132mm)
14.5” (368mm)
11.5lbs (5.3kg)
17.7 lbs (8.1kg)
Contact
Pacific Scientific-OECO
4607 SE International Way
Milwaukie, OR 97222
1 (503) 659-5999
www.oeco.com
Pacific Scientific OECO
Our product competencies and services: Aerospace valves | Thermal management solutions | Environmental control systems | Electro-mechanical products Ground fueling products |
Industrial fluid controls | Aftermarket services
Loading...