Atec Fujikura-FSM-18S User Manual

Single Fibre Fusion Splicer

-18

Faster – Smaller – Lighter – Tougher – Smarter

Features

• Highly durable – designed for tough environments

• Suitable for single fibre splicing

• Cladding alignment with fixed V-groove

• Auto-start tube heater

• Optional fibre clamping methods

• Splice image capture facility

• Software upgrade via Internet

• Includes multi-function worktable

SPECIFICATIONS

Applicable fibres SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) Fibre Count Single Cladding diameter 125µm Coating diameter 100 to 1000µm Fibre cleaved length 8mm to 16mm using Sheath Clamp A, B or C/ 10mm using FH-60-250, FH-60-900 Actual average splice loss 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS.

Measured by cut-back method relevant to ITU-T standards.

Splice time Typical 11sec. with standard SM fibre. Return loss 60dB or greater Splicing modes Total number available equals 100; for pre-set modes and user programmable modes Splice loss estimate Several types of core deformations as well as core axis offset are taken into account for accurate loss

estimate.

Storage of splice result The last 2000 results to be stored in the internal memory. Fibre display X/Y, or both X and Y simultaneously Magnification 300x for single X or Y view, or 187x for X and Y view. Viewing method By two CMOS cameras for fibre viewing and 4.1inches TFT colour LCD monitor Image change over The fibre image is turned upside down automatically according to the monitor position. Operating condition 0-3660m above sea level, 0-95% RH and -10 to 50˚C respectively. Mechanical proof test 2N (standard) Tube heater Built-in auto-start tube heater with 10 heating modes and up to 20 for reference Tube heat time Typical 30sec.with FP-03 protection sleeve. Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves. No. of splice/heating with battery 160 cycles with BTR-08. Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-13. 13.2Vd.c. with BTR-08 Terminals USB1.1 (USB-Mini B) for data and video signal transfer to PC. Wind protection Max. wind velocity of 15m/s. Dimensions 136(W) x 161(D) x 143(H) mm Weight 2.1kg, with ADC-13 AC Adaptor, 2.5kg, with BTR-08 Battery

STANDARD PACKAGE

Description Model No. Q’ty Note Arc Fusion Splicer FSM-18S 1pc. -- Sheath Clamp CLAMP-S60A 1pc. Installed Electrodes ELCT2-20A 1 pair Installed Wind Protector Mirror WPM-08 2pc. Installed, replaceable by use AC Adaptor/Battery Charger ADC-13 1pc. -- AC Power Cord ACC-xx 1pc. ACC-16 UK Type Spare Electrodes ELCT2-20A 1 pair -USB Cable USB-01 1pc. -- Quick Reference Guide M-60S/18S-E 1pc. English

ideo Instruction Manual V-18S-E 1pc. CD, English Warning & Cautions W-60-E 1pc. English Splicing Report - 1pc. English J-Plate JP-05 1pc. -- Carrying Case CC-24-18S 1pc. --

OPTIONAL ITEMS

Description Model No. Note Fibre Holder FH-60-250 For 250µm coating

FH-60-900 For 900µm coating

Sheath Clamp CLAMP-S60A For coating diameter up to 250µm, 8mm to 16mm cleave

For coating diameter of over 250µm, 16mm cleave CLAMP-S60B For coating diameter up to 1000µm, 8mm to 16mm cleave CLAMP-S60C For 900µm loose tube fibre

Battery Pack BTR-08 -- Battery Charge Cord DCC-14 Use for connecting BTR-08 and ADC-13 DC Power Cord DCC-12 For ADC-13, cigarette lighter socket type

DCC-13 For ADC-13, alligator clamp type

Magnifier MGS-06 With bracket Electrodes ELCT2-20A -- Wind Protector Mirror WPM-08 --