Atec Fujikura-FSM-17S User Manual

Top and Front Monitor Positions
Changing Monitor Positions
features:
• 35 second tube heater
• Dual direction monitor position
• Automatic arc calibration
fusion splicing systems
FSM-17S Fusion Splicer
The FSM-17S establishes a new standard for single fi ber “fi xed v-groove” type fusion splicers with a host of improvements including a 35 second tube heater, dual position monitor, and a longer battery life. The real time arc calibration feature makes fi eld main­tenance easier than ever. Also available now is a version of the FSM-17S utilizing a fi ber holder system, making the splicing process extremely simple for inexperienced techni­cians. The FSM-17S is well suited for FTTX applications and both models quickly attach to the newly redesigned ASW-02 workstation making, fi eld portability a breeze.
specifi cations
PARAMETER VALUE
Model FSM-17S: Fiber Sheath Clamp Model
FSM-17S-FH: Fiber Holder Model Applicable Fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655) Cladding Diameter 125µm Coating Diameter FSM-17S: 250µm to 1000µm
FSM-17S-FH: 250µm using the FH-50-250 fi ber holder or 900µm using the
FH-50-900 fi ber holder Fiber Cleave Length FSM-17S: 8 to 16mm with 250µm coating diameter.
16mm with 900µmcoating diameter. Typical Average Splice Loss 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS.
Measured by cut-back method relevant to ITU-T and IEC standards. Splicing Time Typical 11seconds with standard SM fi ber Arc Calibration Method Automatic, using results of previous splice when in AUTO mode. Manual arc
calibration function available. Splicing Modes 40 user programmable modes and up to 60 modes for reference (factory
predetermined setting). Splice Loss Estimate Based upon dual camera cladding alignment data. Storage of Splice Result The last 2000 results to be stored in the internal memory. Fiber Display X / Y, or both X and Y simultaneously. Front or rear monitor display options. Magnifi cation 316x for single X or Y view, or 158x for X and Y view. Viewing Method Dual cameras with 5.6 inch color LCD monitor. Operating Condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 respectively. Mechanical Proof Test 2N Tube Heater Built-in tube heater with 10 heating modes and up to 20 modes for
reference. Tube Heating Time Typical 35 seconds with FP-03 protection sleeve. Applicable Protection Sleeve Length No.of Splice/heat With Battery Typical 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L). Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11.
Terminals USB 1.1 (USB-B type) for PC communication.
Wind Protection Max. wind velocity of 15m/s. (34 mph) Dimensions 150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches) Weight 2.6 kg (5.7 lbs.) including AC adapter ADC-11
60mm, 40mm, micro
13.2V DC with BTR-06(S)/(L).
Video terminal RCA video jack / NTSC.
www.AFLtele.com or 1.800.235.3423
9.01.04
Specifi cations are subject to change without notice.
© 2004, AFL Telecommunications. All rights reserved.
fusion splicing systems
FSM-17S Fusion Splicer
ordering information
DESCRIPTION PART #
FSM-17S Fusion Splicer (machine only)
Each FSM-17S Fusion Splicer includes; ADC-11 AC adapter/battery charger, AC cord, carrying strap, spare electrodes (pair), instruction manual, transit case.
FSM-17S Fusion Splicer Kit
The kit includes a CT-20-12 Cleaver in addition to the FSM-17S, ADC-11 AC adapter/battery charger, AC cord, carrying strap, spare electrodes (pair), instruction manual, transit case.
FSM-17S Fusion Splicer Kit with Battery and Charge Cord
The kit includes a BTR-06(S) battery, DCC-10 battery charge cord, and CT-20-12 Cleaver in addition to the FSM-17S, ADC-11 AC adapter/battery charger, AC cord, carrying strap, spare electrodes (pair), instruction manual, transit case.
FSM-17S-FH Fusion Splicer (machine only)
Each FSM-17S-FH Fusion Splicer includes; FH-50-250 Fiber Holder (1 pair), FH-50-900 Fiber Holder (1 pair), ADC-11 AC adapter/battery charger, AC cord, carrying strap, spare electrodes (pair), instruction manual, transit case.
FSM-17S-FH Fusion Splicer Kit
The kit includes a CT-20 Cleaver in addition to the FSM-17FH, FH-50-250 Fiber Holder (1 pair), FH-50-900 Fiber Holder (1 pair), ADC-11 AC adapter/ battery charger, AC cord, carrying strap, spare electrodes (pair), instruction manual, transit case.
S013612
S013616
S013880
S013832
S013836
accessories recommended for FSM-17S
DESCRIPTION PART # Cleavers
CT-20 Cleaver S012736 CT-20 Cleaver with FC-01 Fiber Collector System S013236 CT-20-11 Cleaver S012744 CT-20-12 Cleaver S012740 FC-01 Fiber Collector System S012760 CT-20-12 Cleaver with FC-01 Fiber Collector System S013304
Batteries & Power Cords
ADC-11 AC Adapter/Battery Charger S013516 BTR-06S Battery (80 splice/heating cycles) S013520 BTR-06L Battery (160 splice/heating cycles) S013528 DCC-10 Power Cord
(connects ADC-11 to BTR-06S or BTR-06L) DCC-12 Power Cord (connects ADC-11 to cigarette lighter socket) DCC-13 Power Cord (connects ADC-11 to power source via alligator clips)
Miscellaneous
ELCT2-20A Electrodes (17S) S013532 ASW-02 Aerial Workstation S010532 WT-6 Work Table (50S only - requires WTS-06 Work Table Support) S013536 WTS-06 Work Table Support S013544 MGS-05 Magnifi er S013548 JP-04 J-plate S013628 Transit Case (17S) S013884 One year extended warranty S012996 Two year extended warranty S013000
S013524
S013552
S013556
www.AFLtele.com or 1.800.235.3423
9.01.04
Specifi cations are subject to change without notice.
© 2004, AFL Telecommunications. All rights reserved.
Loading...