Atec FTK400 User Manual

S i m p l i F i b e r™ O p t i c a l L o s s Te s t K i t s
C o m p l e t e k i t s f o r t e s t i n g a n d t r o u b l e s h o o t i n g f i b e r l i n k s
Verify optical loss and
Today’s high bandwidth premise networks
Proper installation and maintenance of
fiber cabling is imperative for minimiz-
ing costly network downtime. SimpliFiber
Optical Loss Test Kits from Fluke Networks
provide you with all the tools you need
to help you verify proper installation and
maintain fiber optic cabling systems.
These kits provide simple and effective
tools that provide you the capability to
measure loss and power levels, locate
faults and polarity issues, and inspect
connector endfaces.
Fluke Networks’ SimpliFiber Optical Loss Test Kits:
Verify loss and power levels for
both singlemode and multimode
fiber links
Ensure smooth, clean fiber
connector endfaces
Locate cable faults, connector
problems and polarity issues
Count on tools that are field-
tough and user-friendly
Convenient carrying case provides
protection and easy transport
Ensure you have the tools you
need when you need them
Four kit combinations to meet
your fiber testing needs and
budget
power levels
SimpliFiber Power Meter is calibrated for
accuracy at 850 nm, 1300 nm, 1310 nm and
1550 nm. The meter features the ability
to save a reference power level, allowing a
direct display of fiber loss. It has an intui-
tive four-button panel, a large LCD display
screen and a serial port to upload test
results to a PC running LinkWare. SimpliFiber
Sources include a dual wavelength SimpliFiber
850/1300 nm Source and separate 1310 nm
and 1550 nm SimpliFiber Source. The 1310
Source features a 1310 nm laser.
Ensure smooth, clean fiber connections
Inspect the ends of fiber optic connectors
with Fluke Networks’ handheld Fiber Viewer
microscopes. Fiber Viewers ensure your
termination is smooth, clean and ready for
optical transmission. The FT120 200x Fiber
Viewer is used to inspect multimode fiber
end-faces. For singlemode installation, use
the FT140 Fiber Viewer with 400X magnifica-
tion. Both Fiber Viewers contain a special
safety filter to minimize risk of eye exposure
to harmful infrared rays.
Verify and locate faults
Diagnose and repair simple fiber link
problems with Fluke Networks’ VisiFault™
Visual Fault Locator (VFL). The laser-powered
VisiFault locates fibers, verifies continuity
and polarity, and helps find breaks in cables,
connectors and splices. Continuous and
flashing modes make for easier identification.
Compatible with 2.5mm and 1.25mm (with
optional adapter) connectors for easy
connection.
Qualify and troubleshoot copper cabling
Fluke Networks’ CableIQ™ Advanced IT Kit
troubleshoots connectivity problems and
qualifies existing cabling to see if it can
support voice, 10/100, VoIP or Gigabit
Ethernet. CableIQ detects speed/duplex
settings of attached switches and PCs.
Locate and trace cables with IntelliTone™
digital Probe.
Reporting made simple
Manage test results, print professional
reports or export data into popular spread-
sheet formats. Both SimpliFiber and CableIQ
store test results in memory. SimpiFiber
stores up to 100 test results which can be
uploaded to your PC using LinkWare Software
that comes free with your SimpliFiber. For
CableIQ use the included CableIQ Reporter
Software.
Technical Data
Enhance your vision into fiber link verification and troubleshooting with SimpliFiber Optical Loss Test Kits.
SimpliFiber
Power Meter and
850/1300 Source
SimpliFiber Sources
1310 & 1550
VisiFault Visual
Fault Locator
FT120 200X Fiber
Viewer
CableIQ
Advanced IT Kit
SimpliFiber Optical Loss Test Kits
FTK400 Complete Fiber Verification Kit
FTK300 Multimode Fiber Verification Kit
FTK150 Basic Fiber Verification Kit
CIQ-FTK Fiber and Copper Technician Kit
Which kit is right for you?
Complete Fiber Verification Kit (FTK400)
Choose this option if you are a contractor or
network technician who installs and maintains premise networks with both multimode and single­mode optical fiber. Use this kit to verify optical
loss and power levels at 850 nm, 1300 nm, 1310
nm and 1550 nm, inspect fiber endfaces and locate
cable faults, connector problems and polarity issues.
Multimode Fiber Verification Kit (FTK300)
Choose this option if you are a contractor or
network technician who installs and maintains multimode premise networks. Use this kit to verify optical loss and power levels at 850 nm and 1300
nm, inspect fiber endfaces and locate cable faults,
connector problems and polarity issues. Add
singlemode sources as needed.
Basic Fiber Verification Kit (FTK150)
The FTK150 Kit option is a great starter kit for
contractors and network technicians who install and maintain multimode fiber optic links. Verify optical loss and power levels at 850nm and
1300nm. Add singlemode sources, microscope, and
VFL options as needed.
Fiber & Copper Technician Kit (CIQ-FTK)
Choose this option if you install,
maintain and troubleshoot both
Kit Ordering information
Model Description
FTK400 Complete Fiber Verification Kit
FTK300 Multimode Fiber Verification Kit
FKT150 Basic Fiber Verification Kit
CIQ-FTK Fiber & Copper Technician Kit
Options
Model Description
FT140 Fiber Viewer 400x
FT120 Fiber Viewer 200x
VisiFault VisiFault Visual Fault Locator with 2.5mm universal
adapter
8250-12 SimpliFiber Power Meter SC
Calibrated for accuracy at 850 nm, 1300 nm, 1310 nm
and 1550 nm.
8251-13 SimpliFiber 850/1300 Source SC
Incorporates an 850 nm LED and a 1300 nm LED
8251-01 SimpliFiber 1310 nm ST Source
8251-11 SimpliFiber 1310 nm SC Source
8251-02 SimpliFiber 1550 nm ST Source
8251-12 SimpliFiber 1550 nm SC Source
CIQ-KIT CableIQ Advanced IT Kit
Includes CableIQ main unit with remote adapter,
CableIQ Reporter software CD, IntelliTone 200 Digital
Probe, Remote IDs #2-7 and carry case
Loading...