Atec Fluke-726 User Manual

Fluke 726

Pressure

Enabled

Precision Multifunction Process Calibrator

More Calibration Power!

The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.

Technical Data

For more detailed information visit www.fluke.com/726

726 features:

More precise measurement and

•

calibration source performance, accuracies of 0.01%.

Transmitter error% calculation,

•

interpret calibration results without a calculator

Memory storage for up to 8

•

calibration results, retur calibration data from the field for later analysis

Frequenc

•

quency pulse train source mode for enhanced flowmeter testing

HART mode inserts 250 ohm

•

resistor in mA measure and source for compatibility with

ART instrumentation

H Integ

•

allows you to capture the set, reset and deadband of a switch

Custom RTD curves, add calibra-

•

tion constants for certified RTD prob ture measurement

New voltage input protection

•

design for improved reliability

y totalizer and fre

rated pressure sw

es for enhanc

n stored

itch test

ed tempera .

Two separate channels;

•

measure, source and view process signals simultaneously

Measure volts, mA, RTDs,

•

thermocouples, frequency, and resistance to test sensors and transmitters

Source/simulate volts, mA,

•

thermocouples, RTDs, frequency, and pressure to calibrate

transmitters Measure or *sourc

•

using any of 29 Fluke 7 Pressure Modules

e mA w

Sourc

•

pressure measurement to conduct valve and I/P tests

Perform fast linearity tests with

•

auto step and auto ramp features Power transmitters during test

•

using 24 V loop supply and simultaneous mA measurement

Store frequently-used test setups

•

for later use Three-year warranty

•

*Pressure pump required

e pressure

00Pxx

ith simultaneous

726 Specifications

Function

Measure or Source Range or Type Resolution Accuracy Notes

Voltage 0 to 100 mV 0.01 mV 0.01 % Rdg + 2 LSD Max load, 1 mA

mA 0 to 24 0.001 mA 0.01 % Rdg + 2 LSD Max load, 1000 Ω

mV (TC terminals) -10.00 mV to +75.00 mV .01 mV 0.01 % of range + 1 LSD

Resistance 5 Ω to 4000 Ω ≤ 0.01 Ω to 0.1 Ω 0.015 %

Frequency 2.0 to 1,000 CPM 0.1 CPM ± 0.05 % For frequency source;

Loop Supply 24 V dc N/A 10 %

Thermocouples J, K, T, E, L, N, U, C, BP, XK 0.1 ºC, 0.1 ºF to 0.2 ºC

Thermocouples B, R, S 1 ºC, 1 ºF to 1.2 ºC

RTDs Cu 10 Ni 120 (672) 0.1 °C, 0.1 °F to 1.8 °C

Simultaneous Function Capability Channel A Channel B

24.000 mA DC M M or S

24.000 mA DC with 24 V loop supply M

100.00 mV DC M or S

30.000 V DC measure M

20.000 V DC measure, 20.000 VDC Source M or S

5 to 4000 Ohms M or S

Thermocouple J, K, T, E, R, S, B, M, L, U, N, C, BP, XK M or S

RTD Ni120; Pt100 (392); Pt100 (JIS); Pt100, 200, M or S

Pressure (requires Fluke 700PXX Modules) M M used as S

Frequency; Squarewave, 1 CPM to10 kHz; M or S

M = Measure, S = Sourc

500, 1000 (385), Cu 10

fixed amplitude 5 V p-p

Simulate

0 to 20 V (source) 0.01 V

0 to 30 V (measure) 0.01 V

1 to 1100 Hz 1 Hz ± 0.05 % 1 V to 20 V p-p

1.0 to 10.0 kHz 0.1 kHz ± 0.25 % squarewave, -0.1 V offset

10.0 to 15.0 kHz 0.1 kHz ± 0.5 %

Pt 100, 200, 500,

1000 (385)

Pt 100 (3916),

Pt 100 (3926) Cu 10 0.01 ºC, 0.01 °F to 0.15 ºC

General Specifications

C to 71 °C

Storage temperature: -20

Ordering Information

Fluke-726 Precision Multifunction

Operating temperature: -10 °C to 55 °C Relative humidity: 90 % (10 °C to 30 °C);

C); 45 % (40 °C to 50

5 % (30

C); 35 % (50

C to 40

C to 55 °C)

Shock: 1 meter drop test Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and

Included

TL75 Test Leads, AC72 Test Clips, one pair of stackable test leads, product over manual (print) and user’s manual (CD in14 languages.

EN55022:1994 Class B Size (HxWxD): 200 mm x 96 mm x 4

7 mm

(7.9 in x 3.8 in x 1.9 in)

Weight: 650 g (23 oz) Batter Batter

y y lif

A alkaline batteries

our A

25 hours typical

Warranty: Three-years

2 Fluke Corporation 726 Precision Multifunction Process Calibrator

ess Calibrator

Proc

iew

-ROM)

eping your world

Fluke. K

up and running.

Fluke Corporation

PO Box 9090, Everett, WA USA 98206

Fluke Europe B.V.

PO Box 1186, 5602 BD Eindhoven, The Netherlands

e information call:

or mor

In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 2 675 200 or

ax (31 40) 2 675 222

F In Canada (8

ax (9

F From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116

eb ac

00)-360-6866

05) 89

cess: http://www.fluke.com

KE or