Atec Agilent-mso7104a User Manual

Agilent Technologies: We engineer our scopes for you

When you tell us about the test and debug challenges you face,
we listen.

We need your input to design scopes that help you master your challenges. We

don’t build “me-too” products and we don’t develop technical solutions in search

of a problem to solve. Instead we bring you products with imaginative capabilities

that meet your toughest demands.

6%

5%

4%

3%

2%

1%

0%

-1%

Source: Prime Data 2002-09 CARG

Oscilloscope Market Growth

5.9%

-.5%

Oscilloscope MarketAgilent Technologies

With our comprehensive portfolio, you’ll fi nd a scope that fi ts your
needs perfectly.

Whether your main consideration is price point or performance level, we offer a

variety of models that will work for you. Our platforms range from USB-modular

units to high-performance real-time and sampling scopes, with bandwidths from

20 MHz to more than 90 GHz. When your requirements change, so can your

scope, thanks to the availability of extensive hardware and software upgrades.

Each of our scopes incorporates the innovative technology you expect
from Agilent.

As the world’s largest test and measurement company, Agilent commands a

breadth of engineering knowledge that enables us to deliver unique technology.

Our custom MegaZoom IV ASIC powers Infi niiVision’s unmatched waveform

update rate. The Infi niium multi-chip module supports the industry’s lowest noise

fl oor at every bandwidth. And the Infi niiMax probing system provides the fl attest

frequency response on the market.

Our scopes give you the answers you need, not just measurements.

Technology alone isn’t enough – you want fast, accurate answers to your

questions. That’s why we offer the largest range of application-specifi c software

available anywhere, plus an outstanding selection of probes and accessories.

With fl exible solutions like these, you can easily customize your instrument as

your design environment changes.

It’s no surprise that Agilent is the fastest-growing vendor in the
scope market.*

In the past three years, we’ve completely refreshed our scope lineup, with new

entries from Infi niiVision portables to Infi niium powerhouses. We’ve received

numerous industry awards for our breakthroughs. But more importantly, our

scopes contribute to your success – and ultimately help you build the products

that improve our world.

Here are just a few awards earned by Agilent scopes:

Infi niium 90000 Series

Infi niiVision 6000 Series

Infi niium 90000 Series

Infi niium 90000 Series Infi niiVision 5000 Series Infi niiVision 6000L Series

Infi niiVision 7000 Series

Infi niium 90000 X-Series

Infi niium multi-chip module isolates EMI.

To enable our scopes to operate at high frequencies
with minimal electromagnetic interference (EMI),
we relied on our expertise in radio frequency (RF)
technology. Instead of implementing each
component of a digital circuit in a separate circuit
block, we created a multi-chip module that uses
a Faraday cage to isolate EMI. The result? High­bandwidth scopes with the lowest noise fl oor in
the industry.

Infi niiVision ASIC chip enables MegaZoom.

Infi niiVision scopes incorporate acquisition
memory, waveform processing, and display
memory in an advanced .13m ASIC. This patented
4th generation technology, known as MegaZoom
IV, delivers up to 1,000,000 waveforms (acquisi­tions) per second with responsive deep memory
always available.

Agilent Family | 2

CONTENTS

U1600 Page 4

U2700 Page 6

U1600B Handheld &
U2700 USB Modular Oscilloscopes

Model comparison chart

U1600 U2700 2000X 3000X 7000 9000 90000A 90000X 86100D

Channels

Bandwidth

Sample rate

Memory depth

Connectivity
& storage

Waveform math
& analysis

Market

2

20 MHz
to 40 MHz

100 MSa/s

125,000 pts.

USB device: std.
USB host: opt.

Waveform math and
FFT. Complimentary
PC link software, USB
cable can be used to
quickly transfer data
to a PC for further
post-processing and
analysis.

Hand-held scope for
installation and
maintenance in the
industrial automation,
automotive and A/D
industries.

2000 X-Series Oscilloscopes

2

100 MHz
to 200 MHz

1 GSa/s

32 Mpts, std.

USB device: std.

Waveform math and
FFT. Data can easily
be transferred to an
external PC for further
post-processing and
analysis.

Portable scope
ideal for electronics
troubleshooting and
functional test as
well as educational
teaching and
research labs. Also
suitable for road
warriors.

2, 2+8, 4, 4+8

70 MHz
to 200 MHz

2 GSa/s

100 kpts

USB host (one front,
one back), USB
device, LAN: opt.,
VGA: opt., GPIB: opt.

Waveform math and
FFT. Data can easily
be transferred to an
external PC for further
post-processing and
analysis.

Portable economy
oscilloscope for
low-speed design
and debug, as well
as educational and
design labs where
bench space and
budget are limited.

3000 X-Series Oscilloscopes 6000L Series Oscilloscopes

2, 2+16, 4, 4+16

100 MHz
to 500 MHz

4 GSa/s

2 Mpts, std.
Up to 4 Mpts, opt.

USB host (one front,
one back), USB
device, LAN: opt.,
VGA: opt., GPIB: opt.

Waveform math and
FFT. Data can eas­ily be transferred to an
external PC for further
post-processing and
analysis.

Portable economy
oscilloscope with
serial protocol analysis,
ideal for mixed-signal
and embedded designs
as well as educational
and design labs where
bench space and
budget are limited.

2, 2+16, 4, 4+16

100 MHz
to 1 GHz

4 GSa/s

8 Mpts, std.

USB (device and
host), LAN,
XGA-out: std.

Waveform math and
FFT. Data can easily
be transferred to an
external PC for
further post-processing
and analysis.

High-performance portable
scope ideal for mixed-signal
and embedded designs.
Large high-resolution
display makes it the best
scope for signal viewing
and capturing intermit­tent glitches and signal
transients. Comprehensive
software suite provides
insight into application­specifi c problems.

4 , 4+16

600 MHz
to 4 GHz

10 GSa/s

10 Mpts, std.

USB 2.0, LAN, I/O ports,
RS-232, parallel, PS/2,
dual-monitor video,
auxiliary output

Waveform math, FFT,
jitter clock, QuickMeas,
statistics, eye pattern.

General-purpose lab
oscilloscope designed
for engineers working on
low-speed serial designs
or doing oscilloscope­centric testing with logic
and protocol analysis.

4

2.5 GHz
to 13 GHz

20 or 40 GSa/s
on all 4 channels

10 Mpts, std.
Up to 1 Gpts, opt.

USB 2.0 host and
device, Gigabit
Ethernet: std., GPIB: opt.

Waveform math, FFT,
jitter, eye pattern,
protocol decode,
standard bus compliance,
user-defi nable function
via MATLAB (opt),
Windows XP based­system.

High-performance real­time oscilloscope provides
superior signal integrity.
Addressing the needs for
high-speed digital and
RF applications. More
than 29 applications for
compliance, debugging,
and analysis.

7000B Series Oscilloscopes

4

16 GHz
to 32 GHz

40 GSa/s or 80
GSa/s on 2 channels

Up to 2 Gpts

USB 2.0 host and
device, Gigabit
Ethernet: std., GPIB: opt..

Waveform math, FFT,
jitter, eye pattern, protocol
decode, standard bus
compliance, user-defi nable
function via MATLAB (opt),
user-defi nable application,:
opt., Windows XP-based
system.

High-performance,
real-time scope provides
industry’s highest real­time scope measurement
accuracy. Supports
high-speed digital and RF
applications and emerging
technologies. More
than 25 applications for
compliance, debugging,
and analysis.

Up to 16

Module dependent to
65 GHz optical,
90 GHz electrical

40 kSa/s

Limited by hard drive

USB 2.0, LAN, RS-232,
VGA-out, parallel,
PS/2, GPIB:out

TDR, S-Parameters,
eye diagram analyzer,
advanced jitter and
amplitude analysis,
de-embed, embed, FFT,
phase noise analysis
application, MATLAB:
opt.

High-performance,
high bandwidth
multi-function sampling
scope for serial bus
applications, optical,
TDR/TDT and any signal
requiring advanced jitter
analysis.

2000X Page 8

3000X Page 10

MSOs Page 12

6000 Page 14

7000 Page 16

9000 Page 18

90000A Page 20

90000X Page 22

86100D Page 24

Applications Page 26

Probes Page 30

9000 Series Oscilloscopes

90000A Series Oscilloscopes 90000 X-Series Oscilloscopes

86100D DCA-X Series Oscilloscopes

Probes and Applications

Agilent Family | 3

20 MHz to 40 MHz handheld scopes

Engineered for performance in rugged and portable applications

• See more clearly and differentiate simultaneous signals from both channels
more easily with 4.5” LCD color display

• Up to 4 hours battery life and robust package – makes an ideal companion
for I&M personnel and those on the go

• Application software and communication cable included at no extra cost

• Up to 200 MSa/s per channel real time sampling rate and 125,000 pts. recording length
ensure you get high performance, even on a handheld!

• Three-in-one solution: Dual-channel scope, true RMS DMM and real time data logger

• USB host option (001) for quick and convenient saving of data into a USB fl ash drive

4 | www.agilent.com/fi nd/1600family

Handheld high performance. In-plant or off-site,
take advantage of a fully featured scope with
22 automatic measurement functions, advanced
triggering, high sampling rate and deep memory.

High-precision zoom-in capability. Deep memory
and a high sampling rate let you capture long
time spans and non-repeating signals, then zoom
in to the segment of interest to scrutinize subtle
details.

Advanced waveform analysis. Use dual
waveform math (DWM) for signal addition and
subtraction, and fast Fourier transform (FFT)
functions to view the waveform in a frequency
domain using four windowing techniques
(U1604B only).

Easy connections. PC Link software handles your
data collection, storage and documentation needs
– or lets you control the unit remotely – using a
USB 2.0 full-speed connection.

Models and specifi cations

Bandwidth

Sample rate

Channels

Display

Memory

Vertical resolution

Vertical sensitivity

Maximum input

Input impedance

Timebase range

Triggering

Dimensions

Weight

100 MSa/s per channel, 200 MSa/s single channel and interleaved

CAT III 300 Vrms (up to 400 Hz) from terminal to ground

50 ns to 50 s/div 10 ns to 50 s/div

U1602B U1604B

DC to 20 MHz

2

4.5” color CSTN LCD (320x240)

125,000 pts.

8 bits

5 mV/div to 100 V/div

1 MΩ II < 20 pF

Edge, pattern, pulse width, video

24.1 cm high x 13.8 cm wide x 6.6 cm deep

1.5 kg

DC to 40 MHz

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes:

• All models come with the U1560A 1:1, 45 MHz passive probe and
U1561A 10:1, 45 MHz passive probe

• See our complete list of compatible probes on page 31

Accessories – Don’t forget options that make measurements faster and
more convenient, such as the Ni-MH battery pack, AC current clamp,
temperature adapter, soft carrying case and USB host capability.

www.agilent.com/fi nd/1600family | 5

100 MHz and 200 MHz USB modular scopes

Engineered for versatility and portability without compromising performance

• Provides up to 1 GSa/s (interleaved) sampling and 32 Mpts of memory to
help
you gain better insight into signal details

• Advanced analysis capabilities built into the bundled AMM (Agilent
Measurement Manager) scope software include waveform math and FFT
with windowing

• Normal, averaging and peak-detect acquisition modes

• Advanced triggering including edge, pulse width and line-selectable video

• Manual, auto and tracking cursors with T, V and frequency measurements

• Over 25 measurement and math functions

• 1,250-point FFT, Hamming, Blackman-Harris and rectangular windowing

• Dual-screen display with FFT function and keyboard shortcut keys (with AMM software)

• Provides fl exibility of standalone or chassis-based operation for dual-play capability

6 | www.agilent.com/fi nd/2700family

Dual-play capability. Carry powerful test
equipment in your bag along with your laptop
PC, or use it with other instruments in a chassis.

Simplify waveform analysis with automatic
measurements such as rise time and duty cycle,
and the measurement results panel.

Explore frequency domain characteristics of
measured waveforms using FFT analysis (with
four windowing functions) and search for peak
values of the FFT.

Capture signal details effectively with deep
memory.

Models and specifi cations

Bandwidth

Sample rate

Channels

Memory

Vertical resolution

Vertical sensitivity

Maximum input

Input Impedance

Timebase range

Triggering

Dimensions

Weight

117.00 mm x 180.00 mm x 41.00 mm (with rubber bumper)

105.00 mm x 175.00 mm x 25.00 mm (without rubber bumper)

U2701A U2702A

100 MHz

1 GSa/s, 500 MSa/s each channel, max

2

Up to 32 Mpts

8 bits

2 mV/div to 5V/div

CAT 1 30 Vrms, 42 Vpk

1 MΩ: ≈16 pF

1 ns/div to 50s/div

Edge, pulse width, TV

534 g (with rubber bumper)

482 g (without rubber bumper)

200 MHz

Scope additions and enhancements

Probes – Improve your measurement reliability with our complete

selection of probes:

• U2701A comes with the N2862B 10:1, 150 MHz passive probe;
U2702A comes with the N2863B 10:1, 300 MHz passive probe

• See the complete list of compatible probes on page 31

Accessories – Don’t forget options that make measurements faster and
more convenient, such as the six-slot USB MI chassis, BNC cable and
USB secure cable.

www.agilent.com/fi nd/2700family | 7

70 MHz to 200 MHz economy oscilloscopes

Breakthrough technology delivers more scope for the same budget

• 8.5-inch WVGA display, with 50% more signal viewing than other scopes,
is the largest in this class

• 50,000 waveforms per second update rate so you can see more of your
signal detail and infrequent anomalies more of the time

• Up to 100 kpts gives you 40 times more memory so you can capture long, non-repeating signals
while maintaining a high sample rate

• 3 instruments in 1: oscilloscope, mixed-signal oscilloscope, and WaveGen function generator

• First fully upgradable oscilloscope: bandwidth, MSO, WaveGen, and measurement applications

8 | www.agilent.com/fi nd/2000xfamily

See more of your signal more of the time with
the largest screen in its class, the deepest
memory and the fastest waveform update rates.

Do more with the power of 3 instruments in 1:
oscilloscope, logic timing analyzer (optional)
and WaveGen built-in function generator
(optional).

Get more investment protection with the
industry’s only fully upgradable scope, including
bandwidth.

Search and navigate front panel controls make it easy
to fi nd and view specifi c signal activity quickly play,
stop, rewind and fast forward through waveforms.

Models and specifi cations

DS0/MSO2002A DSO/MSO2004A DSO/MSO2012A DSO/MSO2014A DSO/MSO2022A DSO/MSO2024A

Bandwidth

Sample rate

Channels

Memory

Vertical resolution

Vertical sensitivity

Maximum input

Input impedance

Timebase range

Time scale accuracy

Triggering

Dimensions

Weight

2 4 2 4 2 4

MSO: 5 ns/div to 50 s/div DSO: 5 ns/div to 50 s/div MSO: 2 ns/div to 50 s/div

70 MHz 100 MHz 200 MHz

CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpkCAT II 300 Vrms, 400 Vpk with 10073C 10:1 probe: CAT I

500 Vpk, CAT II 400 Vpk with N2862A or N2863A 10:1 probe: 300 Vrms

DSO: 5 ns/div to 50 s/div MSO: 2 ns/div to 50 s/div DSO: 2 ns/div to 50 s/div

1 GSa/s per channel, 2 GSa/s interleaved

100 kpts

8 bits

1 mV/div to 5 mV/div

1 MΩ ±2%

25 ppm ±5 ppm per year (aging)

Edge, pulse width (or glitch), pattern-trigger, video

38.06 cm W x 20.44 cm H x 14.15 cm D

8.5 lbs or 3.85 kg

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes:

• DSO/MSOX2012A and 2014A come with the N2862B 150 MHz passive
probe, 10:1 attenuation

• DSO/MSOX2022A and 2024A come with the N2863A 300 MHz passive
probe, 10:1 attenuation

• See our complete list of compatible probes on page 31

Accessories – Don’t forget options that make measurements faster and
more convenient, such as the VGA/LAN or GPIB modules, soft carrying
case, and rackmount kit.

DSO-to-MSO upgrades – Protect your investment with the fl exibility to
upgrade to an MSO at any point after purchase

Bandwidth – Increase bandwidth at any time

Memory – Increase memory depth at any time

Applications – Expand your scope’s capabilities with our powerful lineup

of applications:

• Options include: WaveGen function generator, mask testing and
segmented memory

• See our complete list of applications on page 26

www.agilent.com/fi nd/2000xfamily | 9

100 MHz to 500 MHz economy oscilloscopes

Breakthrough technology delivers more scope for the same budget

• 8.5-inch WVGA display, with 50% more signal viewing than other scopes,
is the largest in this class

• 1,000,000 waveforms per second update rate so you can see more of your
signal detail and infrequent anomalies more of the time

• Up to 4 Mpts gives you more memory so you can capture long, non-repeating
signals while maintaining a high sample rate

• 4 instruments in 1: oscilloscope, mixed-signal oscilloscope, WaveGen function
generator, and serial protocol analyzer

• First fully upgradable oscilloscope: bandwidth, MSO, WaveGen, and
measurement applications

10 | www.agilent.com/fi nd/3000xfamily

See more of your signal more of the time with
the largest screen in its class, the deepest
memory and the fastest waveform update rates.

Do more with the power of 4 instruments in 1:
oscilloscope, logic timing analyzer (optional),
WaveGen built-in function generator (optional),
and serial protocol analyzer.

Get more investment protection with the
industry’s only fully upgradable scope, including
bandwidth.

Serial bus triggering and hardware-based
protocol decoding means you can effi ciently

debug your embedded designs that include
serial bus communication.

Models and specifi cations

DSO/MSOX3012A DSO/MSOX3014A DSOX3024A DSO/MSOX3032A DSO/MSOX3034A DSO/MSOX3052A DSO/MSOX3054A

Bandwidth

Sample rate

Channels

Memory

Vertical resolution

Vertical sensitivity

Maximum input

Input impedance

Timebase range

Time scale accuracy

Triggering

Dimensions

Weight

100 MHz 200 MHz 350 MHz 500 MHz

2

CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpkCAT II 300 Vrms, 400 Vpk with 10073C 10:1 probe: CAT I 500 Vpk

DSO: 5 ns/div to 50 s/div,
MSO: 2 ns/div to 50 s/div

Edge, pulse width, pattern, Nth edge burst, runt, set up and hold, video, USB, serial (I

2 GSa/s per channel, 4 GSa/s interleaved

44 2 4 2 4

CAT II 400 Vpk With N2862A or N2863A 10:1 probe: 300 Vrms

500 Vpk, CAT II 400 Vpk with N2862A or N2863A 10:1 probe: 300 Vrms

Selectable: 1 MΩ ±1%; 50 Ω ±1.5%

2 ns/div to

50 s/div,

25 ppm ±5 ppm per year (aging)

38.06 cm W x 20.44 cm H x 14.15 cm D

Up to 4 Mpts

8 bits

1 mV/div to 5 mV/div

DSO: 2 ns/div to 50 s/div,
MSO: 5 ns/div to 50 s/div

8.5 lbs or 3.85 kg

DSO: 5 ns/div to 50 s/div,
MSO: 2 ns/div to 50 s/div

2

C, SPI, RS232/UART, CAN, LIN, I2S)

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes:

• DSO/MSOX3012A and 3014A come with the N2862B 150 MHz passive
probe, 10:1 attenuation

• DSO/MSOX3022A and 3024A come with the N2863A 300 MHz passive
probe, 10:1 attenuation

• DSO/MSOX3032A, 3044A, 3052A and 3054A come with the N2890A
500 MHz passive probe, 10:1 attenuation

• See our complete list of compatible probes on page 31

Accessories – Don’t forget options that make measurements faster and
more convenient, such as the VGA/LAN or GPIB modules, soft carrying
case, and rackmount kit.

DSO-to-MSO upgrades – Protect your investment with the fl exibility to
upgrade to an MSO at any point after purchase

Bandwidth – Increase bandwidth at any time

Memory – Increase memory depth at any time

Applications – Expand your scope’s capabilities with our powerful lineup

of applications:

• Options include: WaveGen function generator, mask testing and
segmented memory I²C, SPI, CAN, LIN, RS232/UART and I²S

• See our complete list of applications on page 26

www.agilent.com/fi nd/3000xfamily | 11

Mixed Signal Oscilloscopes: Capture analog, digital and serial signals with a single acquisition in one instrument

Should you consider a mixed signal oscilloscope for your next purchase?

Your design likely has a mix of analog, digital and serial signals. A mixed signal oscilloscope

shows them to you all at once.

Do you need to see more than 4 channels at once? For example, if you’re incorporating serial

buses like I

viewing capability.

Do you need to trigger on digital patterns? An MSO will allow you to do that and preserve

your analog channels to observe behavior in other parts of your design.

A mixed signal oscilloscope integrates traditional analog channels with

16 digital channels.

Combining the familiar controls of an oscilloscope with the additional digital data collection

and pattern recognition of a logic analyzer, Agilent MSOs seamlessly integrate the two

capabilities in one instrument. Trigger across any combination of analog and digital channels.

Integrate serial bus triggering and decode. You can even see inside your FPGA designs.

2

C or SPI or using microcontrollers or FPGAs, you might benefi t from additional

MSOs capture analog, digital and serial signals in a single measurement to identify critical interactions.

12 | Mixed Signal Oscilloscopes

In 1996 Agilent pioneered the mixed signal oscilloscope.

Agilent’s MSOs are engineered for the best signal visibility.

Innovative IC technology we called MegaZoom delivered highly responsive deep memory so

designers could see both cause and effect in digitally controlled analog phenomena. This fi rst

MSO was named Test & Measurement World Test Product of the Year in 1997.

Agilent continues to lead the way with MSOs.

While other vendors are just entering the MSO market, Agilent’s fourth generation MegaZoom IV

technology continues to set the benchmark. You get uncompromised waveform update rates as

you add digital, serial or deep memory capabilities to your scope.

Use MSO digital channels to debug control signals
and data buses.

Debug and validate your FPGA designs faster and
more effectively with an MSO.

• See analog, digital and serial signals all at once with the industry’s largest screen

• Get unmatched signal detail and catch infrequent events with the industry’s fastest waveform

update rates

• Speed your serial debug with the industry’s only hardware-accelerated decode for I

CAN, LIN, FlexRay, RS-232/UART, MIL-STD 1553, and I

2

S

2

C , SPI,

• Simplify common debug tasks with insightful applications software like FPGA dynamic probe,

mask testing, segmented memory, and offl ine viewing and analysis

• Work without line power with our exclusive battery powered options (6000 Series)

• Upgrade previously purchased DSOs to MSOs

Hardware-accelerated serial decode and other
application packages speed common debug tasks.

Agilent’s MSO oscilloscopes offer the industry’s largest
screens to help you see both analog and digital signals.

Mixed Signal Oscilloscopes | 13

100 MHz to 1 GHz digital storage and mixed signal scopes

Engineered for the best signal visibility

• Captures analog, digital and serial signals in real time

• 100,000 waveforms per second real-time update rate helps you catch the most
elusive glitches

• Only high-performance scope with battery-power option – enabling 2+ hours without
line power

• DSO models upgradeable to MSO whenever you need greater capabilities

• Serial bus trigger/decode options including I2C, SPI, CAN, LIN, RS-232/UART and FlexRay

• 3-year return-to-Agilent warranty to protect your investment

14 | www.agilent.com/fi nd/6000family

Mixed signal capture and viewing. With 2 or 4
scope channels plus 16 logic channels, MSOs
uniquely combine the detailed signal analysis
of a scope with the multichannel timing
measurements of a logic analyzer. 8 Mpts of
memory captures long time periods and supports
high sample rates, allowing you to quickly zoom
in on areas of interest.

Battery-power option. Make measurements
where line power isn’t available with an optional,
internal, rechargeable lithium ion battery.

Serial bus triggering and decoding (optional).
Trigger on the industry’s most popular standards,
including I2C, SPI, CAN, LIN, RS-232/UART and
Flexray. Your decoding options display responsive
on-screen decode of serial bus.

Also available in a compact, rack-mountable
design. The 6000L is 1U high and 19” wide to

save valuable rack space. Side and rear air vents
(no top or bottom air vents) let you mount other
instruments directly above or below. Rack mount
brackets and rack rails are standard with every
unit.

Models and specifi cations

DSO/MSO601xA DSO/MSO603xA DSO/MSO605xA DSO/MSO610xA

Bandwidth

Sample rate

Channels

Display

Display update rate

Memory

Vertical resolution

Vertical sensitivity

Bandwidth limit

Maximum input
voltage

Input impedance

Timebase range

Time scale accuracy

Triggering

Dimensions

Weight

100 MHz 300 MHz 500 MHz 1 GHz

2 GSa/s each channel 4 GSa/s max, 2 GSa/s each channel

2 or 4 scope channels on DSOs, 2 or 4 scope channels + 16 logic channels on MSOs

6.3” color XGA LCD (1024 x 768) with 256 intensity levels

8 bits, up to 12 bits in high-resolution or averaging modes

1 mV/div to 5 V/div 2 mV/div to 5 V/div

20 MHz 25 MHz

CAT I 300 Vrms, 400 Vpk; CAT II 100 Vrms, 400 Vpk (1 Mohm)

1 MΩ ± 1% || 11pF 1 MΩ ± 1% || 14 pF or 50 Ω ± 1.5% selectable

5 ns/div to 50 s/div 2 ns/div to 50 s/div 1 ns/div to 50 s/div

Edge, pulse width, pattern, TV, duration, sequence, serial bus

Up to 100,000 waveforms/sec in real-time mode

Standard 8 Mpts

5 Vrms CAT I (50 ohm)

500 ps/div to 50 s/div

15 ppm ≤ ± (15+2*(instrument age in years)) ppm

2

C, SPI, RS-232/UART CAN, LIN and USB)

(I

39.9 cm wide x 18.8 cm high x 28.2 cm deep (with handle)

4.9 kg

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes:

• DSO/MSO603xA, 605xA and 610xA come with the 10073D 10:1,
500 MHz passive probe; DSO/MSO601xA comes with the 10074D
10:1, 150 MHz passive probe

• See our complete list of compatible probes on page 31

Accessories – Don’t forget options that make measurements faster and
more convenient, such as the hard transit case, scope cart, evaluation kit
and rackmount kit.

Portable power – Consider the battery option for measurements on
the go.

DSO-to-MSO upgrades – Protect your investment with the fl exibility to
upgrade to MSO after purchase.

Applications – Expand your scope’s capabilities with our powerful lineup
of applications:

• Options include I2C, SPI, CAN/LIN, RS-232, FPGA, FlexRay, power,
offl ine analysis, vector signal analysis, mask testing and segmented
memory

• See our complete list of applications on page 26

www.agilent.com/fi nd/6000family | 15

100 MHz to 1 GHz digital storage and mixed signal scopes

Engineered for the best signal visibility

• Captures and compares analog, digital and serial signals

• High-resolution 12.1” display – nearly 40% larger than any others in this class

• Serial bus trigger/decode options including I2C, SPI, CAN, LIN, I2S, RS-232/UART,
MIL-STD 1553 and FlexRay

• 100,000 waveforms/sec real-time update rate to capture infrequent events and elusive glitches

• DSO models upgradeable to MSO whenever you need greater capabilities

• 3-year return-to-Agilent warranty to protect your investment

• Front panel search and navigate controls

16 | www.agilent.com/fi nd/7000family

Attractive. The revolutionary large (12.1”), high­defi nition (1024 x 768) color display with 256
levels of intensity grading gives you a precise
representation of the signals you’re testing and
easily accommodates up to 20 channels.
Conserve bench space with the 6.5” depth.

Fast. MegaZoom III technology delivers up to
100,000 waveform acquisitions per second so
the scope responds instantly and you won’t miss
infrequent events and critical signal detail.

Smart. Customize your scope with a wide range
of application packages that provide meaningful
insight into application-specifi c problems.

Best signal visibility. See critical signal detail
and infrequent events like you never have before.
Try our Infi niiVision 7000 Series scopes side-by­side with your current scope and experience the
difference.

Models and specifi cations

DSO/MSO7012A DSO/MSO7014A DSO/MSO7032A DSO/MSO7034A DSO/MSO7052A DSO/MSO7054A DSO/MSO7104A

Bandwidth

Sample rate

Channels

Display

Display update rate

Memory

Vertical resolution

Vertical sensitivity

Bandwidth limit

Maximum input
voltage

Input impedance

Timebase range

Time scale accuracy

Triggering

Dimensions

Weight

100 MHz 350 MHz 500 MHz 1 GHz

2 GSa/s 4 GSa/s max, 2 GSa/s each channel

2 or 4 scope channels on DSOs, 2 or 4 scope channels + 16 logic channels on MSOs

20 MHz selectable 25 MHz selectable

2 ns/div to 50 s/div 1 ns/div to 50 s/div

Edge, pulse width, pattern, TV, duration, sequence, serial bus (I2C, SPI, RS-232/UART, CAN, LIN and USB)

12.1” color XGA LCD (1024 x 768) with 256 intensity levels

100,000 waveforms per second

Standard 8 Mpts

8 bits, up to 12 bits in high-resolution or averaging modes

2 mV/div to 5 V/div

CAT I 300 Vrms, 400 Vpk; CAT II 100 Vrms, 400 Vpk

1 MΩ ± 1% || 14 pF or 50 Ω ± 1.5% selectable

15 ppm

45.4 cm wide x 29.8 cm high x 22 cm deep

5.9 kg

500 ps/div to 50 s/div

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes:

• DSO/MSO703xA, 705xA and 710xA come with the 10073D 10:1,
500 MHz passive probe (default) or the N2873A probe as an
option (Opt 002)

• DSO/MSO701xA comes with the 10074C 10:1, 150 MHz passive
probe (default) or the N2871A probe as an option (Opt 002)

• See our complete list of compatible probes on page 31

Accessories – Don’t forget options that make measurements faster and

more convenient, such as a soft carrying case or rackmount kit.

DSO-to-MSO upgrades – Protect your investment with the fl exibility to
upgrade to an MSO after purchase.

Applications – Expand your scope’s capabilities with our powerful lineup
of applications:

• Options include I2C, SPI, CAN/LIN, I2S, RS-232, FPGA, MIL-STD 1553,
FlexRay, mask testing, power, offl ine analysis, vector signal analysis and
segmented memory

• See our complete list of applications on page 26

www.agilent.com/fi nd/7000family | 17

600 MHz to 4 GHz digital storage and mixed signal scopes

Engineered for the broadest measurement capability

• The combination of powerful Infi niium scope features, the world’s fastest integrated MSO
and the fi rst multi-tab protocol viewer allows you to quickly debug and test a wide variety of
designs, making it the best 3-in-1 instrument

• The industry’s largest display, thinnest depth and lightest weight makes using, sharing or
moving the scope easy

• Get fast and accurate answers to technology-specifi c problems with the widest range of applica­tions

• Provides bandwidth, memory, triggering and signal fi delity triggering for debugging, characterizing
and analyzing a wide variety of analog, serial, digital, and RF signals

• 15” XGA display, the largest in the industry, makes it easier to view analog, digital and serial signals

18 | www.agilent.com/fi nd/9000family

Powerful Infi niium scope. Fast sample and
update rates let you see a precise representation
of your signal. Use responsive deep memory to
see longer periods of time.

Integrated mixed signal oscilloscope. With
sample rates of up to 20 GSa/s, you can see
critical timing relationships or use the 16 digital
channels to see data values. Or, use the digital
channels for protocol analysis. Trigger across the
industry’s largest range of time-correlated analog
and digital channel combinations.

Protocol analysis capability. Extend your scope
capability with protocol analysis. Trigger and
view packets at the protocol level and drill up or
down between the physical and protocol layers.
The tracking marker/bar shows precise time
alignment between protocol viewer and analog
waveforms.

Sized to fi t your environment. The Infi niium 9000
offers the largest display in the industry, with a
smaller depth and lighter weight than any other
scope in its class. It’s an engineering feat with a
20 layer board, 27 ASICs and three workhorse FP­GAs designed to deliver maximum performance.

Models and specifi cations

DSO9064A MSO9064A DS09104A MSO9104A DSO9254A MSO9254A DSO9404A MSO9404A

Bandwidth

Sample rate

Channels

Memory

Vertical resolution

Vertical sensitivity

Maximum input

Input impedance

Timebase range

Timebase accuracy

Triggering

Dimensions

Weight

600 MHz

5 GSa/s, 10 GSa/s

on 2 channels

4+16 logic

4

1 MΩ:150V RMS or DC, CAT I ± 250 V (DC + AC) in AC coupling 50MΩ: 5 Vrms, CAT I

Edge, glitch, runt, timeout, pattern/pulse range, state, pulse width, line, window, setup and

13.9 kg

2.5 GHz

4

4+16 logic

4

1 GHz

10 GSa/s, 20 GSa/s on 2 channels

4

4+16 logic

20 Mpts std. Optional up to 1 Gpts

8 bits ≥12 bits with averaging

1 MΩ: 1 mV/div to 5 V/div, 50 Ω: 1 mV/div to 1 V/div

50 MΩ ± 2.5%, 1 MΩ ± 1% (13pF typical)

5 ps/div to 20 s/div

± (0.4 + 0.5 * YearsSinceCal) ppm pk

hold, video, serial

42.4 cm W x31.8 cm H x 22.6 cm D

4 GHz

4+16 logic

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes:

• All models come with four N2873A 10:1, 500 MHz miniature passive
probes

• MSO models include fl ying leads

• See our complete list of compatible probes on page 31

Accessories – Don’t forget options that make measurements faster an
more consistent, such as the removable hard drive and rackmount kit.

Memory – Increase memory depth to 500 Mpts at any time.

Applications – Expand your scope’s capabilities with our powerful lineup

of applications:

• Compliance testing: USB 2.0, Ethernet, DDR 1/2/3

• Protocol analysis: I²C, SPI, CAN, RS-232/UART, USB, PCI Express,

JTAG, 8B/10B

• Other: Jitter, Infi niiScan, FPGA debug, VSA, power, comm. mask
testing

• See our complete list of applications on page 26

www.agilent.com/fi nd/9000family | 19

2.5 GHz to 13 GHz high-performance real-time lab scopes

Engineered for superior signal integrity and measurement confi dence

• Up to 13 GHz bandwidth and up to 40 GSa/s sample rate on four channels

• 122,000 measurements per second give you amazing measurement update throughput

• Bandwidth upgradeable from 2.5 GHz to 13 GHz

• Industry’s only server-based oscilloscope application software license solution

• Industry’s largest selection of application software packages, including: USB 2.0,
PCI Express®, SATA, Wireless USB, DDR, HDMI, and more

• Industry’s most fl exible compliance software with new User-defi ned application add-in capability

• Low noise for both the oscilloscope and its probing system

• Industry leading MegaZoom ultra deep memory – 1 Gpts at 40 GSa/s on all four channels

• Three level sequence triggering with Infi niiScan Plus trigger system

20 | www.agilent.com/fi nd/90000family

Powerful signal capture. Acquire
25 ms of PCI Express Gen2 data at
40 GSa/s using 1 Gpts of memory to
capture your signal of interest.

Leading glitch trigger. Consistently
trigger on 200 ps single bit (one UI) of
PCI EXPRESS Gen2 using industry –
leading <250 ps glitch trigger.

“Measure all edges” mode. Make
more than 5 million measurements in
less than 1 minute using the “measure
all edges” mode and long memory to
increase your confi dence in the mea­surement statistics.

Industry’s deepest memory (1 Gpts).

Reveal low frequency jitter components
with deep memory.

Certifi ed compliance testing. Use VSA
(vector signal analysis software) and
DSA91204A for Certifi ed Wireless USB
compliance testing.

Models and specifi cations

DSO and DSA

Bandwidth

Sample rate

Channels

Display

Display update rate

Memory

Vertical resolution

Vertical sensitivity

Bandwidth limit

Max input voltage

Input impedance

Timebase range

Time scale accuracy

Triggering

Typical noise fl oor

Max data
transfer rate

Dimensions

Weight

Power

DSO/DSA90254A DSO/DSA90404A DSO/DSA90604A DSO/DSA90804A DSO/DSA91204A DSO/DSA91304A

2.5 GHz 4 GHz 6 GHz 8 GHz 12 GHz 13 GHz

20 GSa/s 40 GSa/s

400,000 waveforms per second (in segmented memory mode)

20 Mpts standard, optional up to 1 Gpts (50 Mpts std. on DSA)

3-level sequence hardware (2 levels) and Infi niiScan software trigger: edge, edge transition, edge

then edge, glitch, line, pulse width, runt, timeout, pattern/pulse range, state, setup/hold, window,

147 µVrms 186 µVrms 234 µVrms 283 µVrms 365 µVrms 389 µVrms

4 channels

12.1” XGA touch screen

8 bits, ≥ 12 bits with averaging

1 mV/div to 1 V/div

500 MHz (using E2697A 1 MΩ adaptor)

± 5 V

50 Ω, ±3%

5 ps/div to 20 s/div real-time

± (0.4 + 0.5 * YrsSinceCal) ppm pk

HDTV, non-monotonic, measurement, and zone qualify

22 MSa/s

43.2 cm wide x 28.3 cm high x 50.6cm deep

20 kg

800 watts, max.

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes, including the award-winning Infi niiMax probing
system and the 1156A-58A single-ended active probes. See our complete
list of compatible probes on page 31.

Accessories – Don’t forget options that make measurements faster and
more convenient, such as the rackmount kit, transit case and testmobile.

Memory – Increase memory depth at any time.

Bandwidth – Protect your investment with bandwidth upgrades after

purchase.

Applications – Expand your scope’s capabilities with our powerful lineup
of applications:

• Analysis and utility options include jitter analysis, eye pattern
analysis, user defi ned function (MATLAB link), and more

• Compliance options include DDR1, 2, and 3, PCI Express, HDMI,
DisplayPort, SATA, SAS, XAUI, USB and more

• Transport your scope application license from one Infi niium to
another with the application server license

• See our complete list of applications on page 26

www.agilent.com/fi nd/90000family | 21

16 GHz to 32 GHz high-performance real-time lab scopes

Engineered for 32 GHz true analog bandwidth that delivers

• The industry’s highest real-time scope measurement accuracy

• Highest true analog bandwidth at 32 GHz

• Lowest oscilloscope noise fl oor of 2.04 mV at 50 mV/div

• Lowest jitter measurement fl oor at 150 fs

• The industry’s fi rst and only 30 GHz oscilloscope probing system

• Industry’s most comprehensive application-specifi c measurement software

22 | www.agilent.com/fi nd/90000xfamily

Custom front end technology. The fast­est real-time oscilloscope bandwidth
available is achieved directly through
the scope hardware, without the noise
and distortions introduced with boost­ing techniques used by other vendors.
Capture rise times as fast as 12.4 ps
with confi dence.

User-defi ned application software
allows automated compliance testing
on proprietary buses. Quickly program

and automate any set of measurements
with an interface similar to Agilent
compliance test software while emerg­ing test standards solidify. Applications
are available today for: MIPI M-Phy,
MDDI, GDDR5, and SAS 6G.

Lowest real-time scope jitter measure­ment fl oor. Your signal rise times are

more accurately depicted.

Develop your own math functions.

With user-defi ned function software
you can seamlessly integrate your
own math functions or fi lters using
MATLAB.

Certifi ed compliance testing. Use one
of the many available compliance appli­cation software packages, for standards
such as USB 3.0, to test.

Models and specifi cations

DSO and DSA

Bandwidth

Sample rate

Channels

Display

Display update rate

Memory

Vertical resolution

Vertical sensitivity

Bandwidth limit

Max input voltage

Input impedance

Timebase range

Time scale accuracy

Triggering

Typical noise fl oor

Max data
transfer rate

Dimensions

Weight

Power

DSO/DSAX91604A DSO/DSAX92004A DSO/DSAX92504A DSO/DSAX92804A DSO/DSAX93204A

16 GHz

80 GSa/s on 2 channels, 40 GSa/s on 4 channels

>400,000 waveforms per second (in segmented memory mode)

20 Mpts standard, optional up to 2 Gpts (50 Mpts std. on DSA)

± 0.1 ppm (immediately after calibration), ± 0.1 ppm/year (aging)

3-level sequence hardware (2 levels) and Infi niiScan software trigger: edge, edge transition,

edge then edge, glitch, line, pulse width, runt, timeout, pattern/pulse range, state, setup/hold,

1.34 1.53 1.76 2.031.862

100 - 240 VAC at 50/60 Hz; maximum input power 800 Watts

20 GHz 25 GHz 28 GHz 32 GHz

4 channels

12.1” XGA touch screen

8 bits, ≥ 12 bits with averaging

1 mV/div to 1 V/div

500 MHz (using E2697A 1 MΩ adaptor)

± 5 V

50 Ω, ±3%

2 ps/div to 20 s/div real-time

window, HDTV, non-monotonic, measurement, and zone qualify

22 MSa/s

10.5”x16.75”x18.7” (27cm x 43cm x 48cm)

45.1 lbs (20.5 kg)

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes, including the industry’s fi rst 30 GHz Infi niiMax III
probing system. See our complete list of compatible probes on page 31.

Accessories – Don’t forget options that make measurements faster and
more convenient, such as the rackmount kit and transit case.

Memory – Increase memory depth at any time.

Bandwidth – Protect your investment with bandwidth upgrades after

purchase.

Applications – Expand your scope’s capabilities with our powerful lineup
of applications:

• Analysis and utility options include jitter analysis, eye pattern
analysis, user defi ned function (MATLAB link), and more

• Compliance options include, DDR1,2 and 3, PCI Express, HDMI,
DisplayPort, SATA, SAS, MIPI D-Phy, and USB 3.0

• Transport your scope application license from one Infi niium to
another with the application server license

• See our complete list of applications on page 26

www.agilent.com/fi nd/90000xfamily | 23

DC to > 90 GHz wideband sampling scope

Engineered for precise, accurate high-speed electrical and optical analysis

• Four powerful instruments in one unit: High-bandwidth scope, digital
communications analyzer, time domain refl ectometer and jitter analyzer

• Wide bandwidth with the lowest residual jitter and noise for the highest
precision waveforms

• The industry standard for analysis of optical communication signals

• Calibrated reference receivers for optical transceiver compliance test

• Modular platform allows optical, electrical, TDR/TDT, and S-parameter measurements

• Advanced jitter and amplitude analysis at the push of a button

• Jitter spectrum, phase noise, and jitter transfer measurements on both electrical and
optical signals

• Integrated de-embedding, embedding and equalization capability

24 | www.agilent.com/fi nd/DCA-Xfamily

Full-function oscilloscope. Bandwidth of 65 GHz
optical and > 90 GHz electrical ensures the most
accurate waveform measurements.

Eye diagram analysis. Fast and accurate
transmitter characterization using eye diagram
analysis and automated mask margin measure­ments.

Advanced jitter and amplitude analysis. Accurate
decomposition of jitter and amplitude impairments
provides compliant total jitter (TJ) results and
insight into root cause of eye closure.

Time domain refl ectometer. Measure both
impedance and S-parameters and verify
transmission quality on cables, components
and channels.

Models matching your applications

86100D Infi niium DCA-X mainframe

Electrical 1 to 14.2 Gb/s

86112A

83496B

86108A

Electrical 10 to > 43 Gb/s

86118A

86107A

86117A

Optical 1 to 14.2 Gb/s

86105C

83496B

86105D

86115D

Optical 10 to > 43 Gb/s

86116C

86107A

TDR

54754A

Highest precision view of serial bus waveforms

Dual channel electrical > 20 GHz

Electrical clock recovery (and PLL analysis)

Dual 35 GHz channels, jitter <60 fs, internal clock recovery

Electrical signals for 40/100G Ethernet, SONET/SDH

Dual remote heads 70 GHz

Precision timebase (jitter < 100 fs)

Dual channel electrical > 50 GHz

Fibre Channel, Ethernet, SONET/SDH, PON

9 GHz optical channel, 20 GHz electrical channel

Optical clock recovery (single-mode and multimode)

20 GHz optical channel, 35 GHz electrical channel

20 GHz optical, multi-channel

40/100G Ethernet, SONET/SDH

65 GHz optical channel, 90 GHz electrical channel

Precision timebase (jitter < 100 fs)

Serial bus standards – PCIe, SATA, SAS, USB, S-parameters

Differential TDR, dual 18 GHz channels

Scope additions and enhancements

Probes – Improve your measurement reliability with our comprehensive

selection of probes.

Options – Mainframe options include an enhanced trigger, GPIB interface,
removable hard drive and signal processing capabilities such as equaliza­tion, de-embedding and embedding of waveforms.

Modules – Choose from an extensive list of optical, electrical, TDR/TDT,
dual electric channel, trigger and clock recovery modules.

www.agilent.com/fi nd/DCA-Xfamily | 25

Applications: Engineered to turn measurements into answers

You need more than data from your scope – you want fast, accurate

answers to your questions.

Many scopes can churn out reams of data. But when you’re looking for meaning-

ful insight into designs under development, Agilent offers the broadest selection

of oscilloscope solutions in the industry.

We deliver more than 80 powerful applications packages for debug,

analysis, compliance and characterization.

Whether you’re debugging low-speed serial bus operation or FPGA functionality,

you’re focused on signal integrity, or you’re ensuring compliance to industry

standards, Agilent has solutions to help you get to accurate answers more

quickly.

Speed debug as you deploy FPGAs or debug serial bus designs with our

innovative solutions.

Our integrated mixed-signal oscilloscope technology allows us to offer unique

solutions like our FPGA dynamic probe to let you see inside your FPGA for faster

debug. And our protocol level triggers and displays help you resolve the physical

layer root cause of issues you discover at the protocol level.

Take advantage of the expertise Agilent gains by participating in key

industry standards bodies.

Our engineers sit on the board of directors of many standards groups, including

the JEDEC Solid State Technology Association, the Video Electronics Standards

Association (VESA) and the Peripheral Component Interconnect Special Interest

Group (PCI-SIG). We help defi ne the test standards so we can give you consistent

measurement results and support you as you deploy these emerging technologies

for your success.

Make your job simpler with automated setups and one-button

compliance testing for more than 25 applications.

We make using our solutions easy so busy engineers can offl oad tedious

characterization and still get accurate results. A test setup wizard guides you

through selection, confi guration, connection, execution and results reporting.

And the results reports include confi guration, measurements made, pass/fail

status, margin analysis and waveforms.

We also offer user-defi nable application software that allows automated

measurements for compliance testing on proprietary buses or while emerging test

standards solidify.

The PCI Express® electrical performance
validation and compliance software lets you test
devices to ensure compliance with the PCIe 1.1
and PCIe 2.0 electrical specs for add-in cards and
motherboards.

The USB 2.0 compliance test software
makes USB signal integrity testing as
simple as capturing the signals with your
scope, eliminating the need to transfer
waveforms to your PC.

26 | www.agilent.com/fi nd/appsfamily

Oscilloscope Compliance and Characterization Solutions

Industry Model number Oscilloscope Standards organization

10 Gb attachment unit interface (XAUI)

10 Gb BaseT ethernet

Certifi ed Wireless USB

DDR1/2/3

DDR2 and LPDDR2

DisplayPort

DVI

Ethernet 1000/100/10BASE-T

Fibre Channel

Fully buffered DIMM

GDDR5

HDMI 1.4

IEEE1394a/b

MIPI D-PHY

PCI EXPRESS gen 1/2

QPI

SD UHS-1

Serial ATA I/II/III

Serial attached SCSI (SAS)

USB 2.0 low, full and high speed

USB 3.0

WiMedia and wireless USB

Wireline

Wireline

Consumer electronics

Computing and memory

Computing and memory

Media

Media

Wireline

Storage

Computing and memory

Computing and memory

Media

Consumer electronics

Consumer electronics

Computing and memory

Computing and memory

Storage

Storage

Storage

Consumer electronics

Consumer electronics

Consumer electronics

N5431A

U7236A

89601A Option BHB

U7233A

N5413B

U7232A

N5394A

N5392A

N5410A

N5409A

U7245A

N5399B

QP-SIA or QP-SIA-DA*

U7238A

N5393A/B

U7241A

U7246A

N5411A

N5412A

N5416A

U7243A

U7239A

90000, 90000X Series

90000 Series

90000, 90000X Series

9000, 90000, 90000X Series

9000, 90000, 90000X Series

90000, 90000X Series

90000 Series

9000, 90000 Series

90000 Series

90000 Series

90000, 90000X Series

90000, 90000X Series

90000 Series

90000, 90000X Series

90000, 90000X Series

90000 Series

9000, 90000, 90000X Series

90000, 90000X Series

90000, 90000X Series

9000, 90000 Series

90000, 90000X Series

90000 Series

www.ieee802.org/3/ and www.ethernetalliance.org

www.ethernetalliance.org

www.usb.org

www.jedec.org

www.jedec.org

www.displayport.org

www.ddwg.org

www.ieee802.org/3/ and www.ethernetalliance.org

www.fi brechannel.org

www.jedec.org

www.jedec.org

www.hdmi.org

www.1394ta.org

www.mipi.org

www.pcisig.org

www.sdcard.org

www.sata-io.org

www.scsita.org

www.usb.org

www.usb.org

www.wimedia.org

HDMI validation and compliance software gives
you a fast way to verify and debug designs for
set-top boxes, digital video recorders, DVD
players, entertainment systems and motherboards.

The DDR2 compliance test application
provides a fast and easy way to test, debug
and characterize your DDR2 designs and
includes crucial measurements, such as
eye-diagram, mask testing and ringing.

*Quantum Parametrics: www.quantumparametrics.com

www.agilent.com/fi nd/appsfamily | 27

Oscilloscope Software Applications

Model number Oscilloscope solutions

Automotive serial data analysis

CAN/LIN trigger and decode

Communication mask test kit

EZJIT and EZJIT Plus jitter analysis

FlexDCA

FlexRay

FlexRay triggering and decode

FPGA dynamic probe - Altera

FPGA dynamic probe - Xilinx

High-speed serial data analysis and clock recovery

I²C/SPI serial decode

2

S triggering and decode

I

Infi niiScan event identifi cation

Infi niiSim waveform transformation

Infi niium user-defi ned function

Jitter and amplitude analysis

JTAG triggering and decode

USB 2.0/ USB 3.0 triggering and decode

N5402A

DSOX3AUTO, N5424A, N8803A, and N8803B

E2625A

E2681A and N5400A

N1010A

N5432A , N8803B

N5432C

N5434A and N5433A

N5406A and N5397A

E2688A and N5384A

DSOX3EMBD, N5423A , N5391A and N5391B

DSOX3AUDIO and N5468A

N5414B and N5415B

N5465A , 86100D-SIM, and N1010A-SIM

N5430A

86100D-200/300

N8817A

N5464A, N5464B and N8805A

90000, 90000X Series

3000X, 6000, 7000, 9000, 90000, 90000X Series

9000, 90000 Series

9000, 90000, 90000X Series

86100 Series

6000, 7000, 9000 Series

6000, 7000 Series

6000, 7000, 9000 Series

6000, 7000, 9000 Series

9000, 90000, 90000X Series

3000X, 6000, 7000, 9000, 90000, 90000X Series

3000X, 6000, 7000 Series

9000, 90000, 90000X Series

9000, 90000, 90000X, 86100 Series

9000, 90000, 90000X Series

86100 Series

9000, 90000, 90000X Series

9000, 90000, 90000X Series

CAN/LIN triggering and hardware-accelerated
decode helps you quickly fi nd and debug errors
and signal integrity problems on CAN and LIN
serial buses.

RS-232/UART serial decode and trigger
eliminates the need to manually decode bus
traffi c. Using data captured on the scope or
logic channels, the application lets you
easily view the information sent over a
RS-232 or other UART serial bus.

28 | www.agilent.com/fi nd/appsfamily

Oscilloscope Software Applications

Model number Oscilloscope solutions

Mask/waveform limit testing

MATLAB data analysis

MILSTD 1553

MIPI D-Phy triggering and decode

Offl ine PC-based analysis of acquired data

PCI Express triggering and decode

Power measurement and analysis

RS-232/UART triggering and decode

SATA triggering and decode

Segmented memory

Serial data analysis

Serial data equalization

S-parameter measurements

TDR/TDT measurements

USB 2.0 triggering and decode

USB 3.0 triggering and decode

User-defi nable application

User-defi nable function

Vector signal analysis

DSOX2MASK, DSOX3MASK, and N5455A

Option-061 or -062

N5469A

N8802A

B4610A

N5463B and N5463A

U1881A and U1882A

DSOX3COMP, N5457A , N5464A and N5462B

N8801A

DSOX2SGM, DSOX3SGM, and N5454A

E2688A and N5384A

N5461A

86100D-202

86100D and 54754A

N5464B and N5464A

N8805A

N5467A

N5430A

89601A

2000X, 3000X, 6000, 7000 Series

(standard on Infi niium Series)

6000, 7000, 9000, 90000, 90000X, 86100 Series

6000, 7000 Series

9000, 90000, 90000X Series

2000X, 3000X, 6000, 7000 Series

9000, 90000X Series

3000X, 6000, 7000, 9000 Series

2000X, 3000X, 6000, 7000, 90000, 90000X Series

9000, 90000, 90000X Series

2000X, 3000X 6000, 7000 Series

(standard on Infi niium Series)

90000 9000, 90000, 90000X Series

9000, 90000 , 90000X Series

86100D Series

86100 Series

9000, 90000, 90000X Series

90000, 90000X Series

9000, 90000, 90000X Series

9000, 90000, 90000X Series

6000, 7000, 9000, 90000, 90000X Series

Mask/waveform limit testing provides a fast
and easy way to test your signals to specifi ed
standards, and uncover unexpected signal
anomalies, such as glitches.

USB serial trigger and decode provides
powerful time-correlated views of wave­forms and symbols to the bit level, making
it easy to isolate communication faults to
logic or analog sources.

www.agilent.com/fi nd/appsfamily | 29

Probes & Accessories: Engineered for signal access and measurement accuracy

To get top performance from your scope, you need the right probe for

your application.

Selecting the best probe for the job ensures you can access your signals and

make reliable measurements. To complement the scopes we sell, Agilent of-

fers a broad family of probes and accessories. Solutions range from simple,

inexpensive passive probes to state-of-the-art high-frequency interposers

that meet your toughest probing challenges.

Passive probes

When you need to measure high voltages, these are the most durable and

economical probes and the most widely used.

Active probes

These single-ended or differential probes handle higher bandwidths with

lower signal loading. Single-ended active probes provide the best overall

combination of resistive and capacitive loading. With low loading, single-

ended probes can be used on high-impedance, high-frequency circuits that

would be overloaded with passive probes. Differential active probes are used

to look at signals referenced to each other and also at small signals in the

presence of large DC offsets or other common-mode signals, such as power

line noise.

Infi niiMax Series

These specialized active probes complement the Infi niium Series scopes.

The Infi niiMax III Series is the fi rst 30 GHz probing system and gives you the

industry’s fl attest frequency response and widest selection of probe heads

and accessories. With capabilities such as 30 GHz bandwidth for differential

measurements and bandwidth upgradability to higher performance as your

needs evolve, the award-winning Infi niiMax probe system combines maximum

performance with excellent usability.

Current probes

These probes sense the current fl owing through a conductor and convert it

to a voltage that can be viewed and measured on your scope. Agilent’s cur-

rent probes use a hybrid technology that includes a hall effect sensor, which

senses the dc current and a current transformer, which senses the ac current,

making it unnecessary to make an electrical connection to the circuit.

Innovative probe accessories make connections a snap.

Connecting to components like fi ne-pitch devices, surface-mount integrated

circuits and DDR ball-grid arrays can be challenging. We take the challenge

away with accessories that let you connect easily – even hands-free.

InfiniiMax, the world’s best high-speed probing
system, offers you the highest performance available
for measuring differential and single-ended signals,
with flexible connectivity solutions for today’s high­density ICs and circuit boards.

Compact 2.5-mm diameter probe heads with low
input capacitance and various fine-pitch probe tip
accessories make the N2870A Series passive probes
ideal for probing densely populated IC components or
surface-mount devices.

30 | www.agilent.com/fi nd/probesfamily

Recommended probes and accessories for Agilent oscilloscopes

U1600 Series

Scope bandwidth

Probe interface

Passive probe 1:1

Passive probe 10:1

High-voltage passive probe 100:1

High-voltage passive probe 1000:1

Low Z

Active single-ended probe

Active differential probe (high speed)

Active differential probe (high voltage)

Current probe

Rackmount kit

Carrying case

Notes:
* Includes SE probe accessory

1. Requires 1142A power supply

2. Order one or more Infi niiMax III probe heads -- N5445A, N5439A, N5444A or N5441A.

3. Requires N2779A power supply

4. Includes one 10073D passive probe

5. Order one or more Infi niiMax I probe heads or connectivity kits per amplifi er. a. E2669A Infi niiMax connectivity kit for differential/single-ended measurements, b. E2668A Infi niiMax connectivity kit for single-ended measurements,
c. E2675A Infi niiMax differential browser probe head and accessories, d. E2676A Infi niiMax single-ended browser probe head and accessories, e. E2677A Infi niiMax differential solder-in probe head and accessories, f. E2678A Infi niiMax single-ended/differential socketed
probe head and accessories, g. E2679A Infi niiMax single-ended solder-in probe head and accessories, h. E2695A Differential SMA probe head

6. Order one or more 10073D Infi niiMax II probe heads or connectivity kits per amplifi er. a. N5380A Infi niiMax II 12 GHz differential SMA adapter, b. N5381A Infi niiMax II differential solder-in probe head and accessories, c. N5382A Infi niiMax II 12 GHz differential browser,
d. N5425A Infi niiMax I and II 12 GHz differential solder-in ZIF probe head. Requires N5426A or N5451Ae. N5426A Infi niiMax I and II 12 GHz ZIF tip, f. N5451A Infi niiMax I and II 9 GHz/5 GHz Long wire ZIF tip.

20-40 MHz

BNC

U1560A

U1561A

U1562A 10076B

U1583A

U2700 Series

100 MHz 200 MHz

70-200 MHz

10070D N2870A 10070C with E2697A

N2862B, N2863B N2862B, N2863B, N2890A 10074D, 10073D, N2873A (10:1),

10074C, N2871A,

N2875A (20:1)

10076B, N2876A 10076B with E2697A

N2771B with E2697A

N2795A 1157/8A, 1131/2/4

differential probe accessory

N2791A, N2891A N2790A/91A/ 92A/93A, N2791A, N2790A with E2697A

N2791A, N2891A

1146A, N2893A, N2780A,

1146A, 1146A, 1147A, N2893A 1146A, 1146A, 1147A, N2893A, 1146A, N2780A/81A/82A/83A

N2781A, N2782A,

N2780A/81A/82A/83A

2000 X-Series 3000 X-Series 6000/7000 Series 9000 Series 90000A Series

BNC

BNC AutoProbe Lite BNC

10070C

N2872A

10076B

N2771A

N2771B

3

N2783A

100-500 MHz

100 MHz

300 MHz-1 GHz

N2871A

1 GHz - 4 GHz 2.5 GHz - 13 GHz

AutoProbe Lite

AutoProbe AutoProbe

N2873A

10076B, N2876A

N2771B

N2874A (10:1), N2876A (100:1)N2874A, N2876A

N2795A

5

1130A

1130A

N2891A

N2780A/81A/82A/83A

3

1144A

N2791A/

N2891A

N2780A/81A

/82A/83A

1

N2795A/96A

or 1130A*

1130A5

1

or 1141A

N2790A/91A/

92A/93A, N2891A

N2780A/81A/82A/83A3 with E2697A

3

1155A, 1130A*

5

1131/2/45 or 1168/69A6 with

N2795A/96A

1130A*

4

54006A (6GHz), 10073D or

N2873A (500MHz) with

4

E2697A

5

or 1168/69A6*

4

N6456A N6456A N2916B N2732A N2902A N5470A

N6457A

N6457A

N2917B (hard) or N2733A (soft)

N5475A

90000 X-Series

16-32 GHz

AutoProbe II

N2870A, 10070D with N5449A

N2873A with N5449A

10076B with N5449A

N2771B with N5449A

N2874A, N2876A with N5442A

N2795A,96A,1156A,57A,58A

with N5442A

N2800A/01A/02A/03A

4

N2790A,91A,891A with N5449A

or N2792A,93A with N5442A

3

1147A, N2893A with N5449A

2

To see our entire portfolio of award-winning probes, see the probe catalog at www.agilent.com/fi nd/Agilentprobes.

www.agilent.com/fi nd/probesfamily | 31

www.agilent.com/find/scopefamily

For more information on Agilent Technologies’
products, applications or services, please contact
your local Agilent office. The complete list is
available at:

www.agilent.com/find/contactus

Microsoft is a US registered trademark of Microsoft Corp
Windows is a US registered trademark of Microsoft Corp.
PCI Express is a registered trademark of PCI-SIG.
MATLAB is a US registered trademark of The Math Works, Inc.

Product specifications and descriptions
in this document subject to change
without notice.

© Agilent Technologies, Inc. 2010
Printed in USA, January 1, 2011
5989-7650EN

Phone

Americas

Canada [phone]
Brazil (11) 4197 3500
Mexico 01800 5064 800
United States [phone]

Asia Pacific

Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP countries (65) 375 8100

Europe

Belgium 32 (0) 2 404 93 40
Denmark 45 70 13 15 15
Finland 358 (0) 10 855 2100
France 0825 010 700*
(0.125
Germany 49 (0) 7031 464 6333
Ireland 1890 924 204
Italy 39 02 92 60 8484
Netherlands 31 (0) 20 547 2111
Spain 34 (91) 631 3300
Sweden 0200-88 22 55
United Kingdom 44 (0) 118 9276201

Other unlisted countries:
www.agilent.com/find/contactus

/minute)