Atec Agilent-E5810A User Manual
5
Agilent E5810A LAN/GPIB
Gateway
Features
• Remote access and control of
GPIB instruments via the LAN
• Easy setup and use via digital
display and Web browser
Best for
• Connection to remote GPIB and
RS-232 instrumentation
• Shared test systems
Remote access and collaboration
with GPIB instruments via your LAN
The E5810A can use DHCP, if available, to automatically configure necessary network parameters, including its IP address. The gateway can
be controlled from multiple locations
and by multiple users via your LAN,
so it is easy to share control of
instruments from locations worldwide.
For easy remote access enter the IP
address from the digital display as
the URL in your Web browser and
gain access to connected GPIB and
RS-232 instruments. Then use your
browser to send instrument commands interactively and quickly see
your measurement results. Use the
digital display and LEDs to check
the IP address and troubleshoot
locally.
For programming capability you
have access with the latest version
of IO Libraries Suite, version 14.2,
to program in all standard development environments.
System use
For system environments, the
E5810A gateway can be rack
mounted. The rack mount kit
(Option 100) allows two devices to
be placed side-by-side in one rack
width. With its built-in power supply, there are no additional power
modules to mount.
For additional information and
graphic see page 8.
Agilent E5805A USB/
4-Port RS232 Interface
Features
• Easy connection from standard
USB port on your PC to up to
four RS-232 instruments or
devices
• Fully compatible with Windows
COM driver and industry-stan-
dard VISA I/O software.
Best for
• Easy connection to RS-232
devices
• Notebook computer RS-232
connections
Add four serial ports in minutes
The Agilent E5805A USB/4-port
RS232 interface provides a direct
connection from the USB port on
your notebook or desktop PC to up
to four RS-232 instruments or
devices. There are no switches to
set, no PC cards to install, and no
external power supplies are
required. Simply install the driver
and plug in the E5805A USB 4-port
RS232 interface to add four RS-232
ports to your computer.
Since the E5805A is a standard
Plug-and-Play device, your comput-
er automatically detects and config-
ures it when it is connected to
your computer USB port. You can
interface up to four devices, with
baud rates up to 230 Kb/s per seri-
al port. The E5805A provides four
DB9 serial connectors and ships
with a 1.8-meter USB cable.
Agilent E5813A Networked
5-Port USB Hub
Features
• Interface a variety of GPIB, RS-
232, and USB devices to complete
your test system
• Extend USB devices beyond five
meters
• USB ports appear to be locally
attached and are locked to one
computer
Best for
• Remote access to USB ports—
devices or instruments
Connect remote USB, GPIB or
RS-232 instruments or devices via
a standard LAN
The Agilent E5813A networked 5-
port USB hub uses LAN technology
to overcome the 5-meter distance
Take advantage of LAN
technology for your GPIB
instruments and test
systems
E5810A technical specifications
General requirements
Minimum system requirements Available 10BASE-T/100BASE-TX LAN port
(client computers)
Operating system Windows 98(SE)/Me
(note 98 supported with version 14.0 only)/2000/XP/Vista
Supported Web browsers Internet Explorer 4.0 or higher
Netscape Navigator 4.7 and higher
Software required Web browser or for programmatic control—
Agilent IO Libraries Suite (included);
see requirements on page 1
Supported standards IEEE 488.1 and IEEE 488.2 compatible
10BASE-T/100BASE-TX networks
VXI-11 protocol
EIA-232
General characteristics
Power supply 100-240 V ± 10%
Power consumption (7 watts) 25 VA peak
Power line frequency 47 to 63 Hz
Connectors Std 24-pin GPIB (IEEE-488), RS-232 (9-pin), LAN RJ-45
Maximum data rates More than 900 KB/s—GPIB port
115 Kb/s—RS-232 port
RS-232 baud rate 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 b/s
RS-232 Flow control None, RTS/CTS, XON/XOFF, DTR/DSR
RS-232 Parity None, Odd, Even, Space, Mark
RS-232 bits 5, 6, 7, 8
RS-232 Stop bits 1, 2
RS-232 SRQ interrupts on RI, DSR, DCD, CTS
Max instrument connections 14 instruments—daisy chain via GPIB
1 RS-232 device
Up to 16 simultaneous I/O connections
Indicators LEDs for Power, Activity, Fault
EMC and safety * IEC 61326-1 Group 1, Class A
IEC 61010-1
Warranty 1 year
Network protocols See the E5810A User’s Manual for supported network
protocols and functions
Dimensions
Length, width, and height 211 mm wide x 230 mm deep x 41 mm high
(1U height, 1/2 rack)
Weight 1.6 kg
Environmental specifications
Operating environment 0°C to 55°C
Operating humidity Up to 90% at 40°C non-condensing
Storage environment -40°C to +70°C
Storage humidity Up to 90% at 65°C non-condensing
* Additional detail and information in the Declaration of Conformity
Loading...