•Front and rear output
terminals
(E3633A/34A only)
•GPIB and RS-232 standard
•Save and recall functions
•Overvoltage protection,
Overcurrent protection
(except E3631A)
Clean and stable power
with programmability at an
affordable price
Affordable programmable power
supplies to meet your needs
The E363xA Series of programmable
DC power supplies gives you the
performance of the system power
supplies at a decent price. All models
provide clean power, excellent regulation and a fast transient response with
built-in GPIB and RS-232 interfaces.
The E363xA Series is designed to
meet the requirements of the most
demanding applications in R&D design
verifications, production testing, and
QA verifications with traditional quality
and reliability which you can count on.
Excellent performance you can trust
With the 0.01% load and line
regulation, the E363xA Series can
maintain a steady output when power
line and load changes occur. The
power supplies specify both normal
mode voltage/current noise and
common mode current noise. The
low normal mode noise specification
assures clean power for precision
circuitry applications, and the low
common mode current provides isolation from power line current injection.
Remote Interface
If you have an IEEE-488 card or
RS-232 in a PC, these power supplies
will work for you. Every model comes
equipped with both GPIB and RS-232
as standard. All programming is done
in easy-to-use SCPI (Standard Commands for Programmable Instruments).
The user’s guide describes the process
for the first-time programmers.
Front Panel Operation
A knob and self-guiding keypads allow
you to set the output at your desired
resolution quickly and easily. You
can store and recall for up to three
complete setups using the internal
non-volatile memory. The output on/
off button sets the output to zero.
E3631A triple-output power supply
This famous 80-watt triple output
supply offers three independent
outputs: 0 to 6 V/5A, 0 to +25V/1A
and 0 to –25V/1A. The 6 V output is
electrically isolated from the ±25 V
supply to minimize any interference
between circuits under test. The ±25 V
outputs can be set to track each other.
E3632A/33A/34A single-output
dual range power supplies
These single output power supplies
give you the flexibility to select from
a dual output range. The output load
is protected against overvoltage
and overcurrent, which are easily
monitored and adjusted from the front
panel and remote interface. Remote
sensing is available to eliminate the
errors caused by voltage drops on
the load leads. The E3633A/34A offer
front and rear output terminals for
easy wiring.
2
E3631A/32A/33A/34A Programmable DC Power Supply Specifications
Model Number
DC Output
Rating (0 ºC to 40 ºC)
Load Regulation
± (% of output + offset)
Line Regulation
± (% of output + offset)
123
0 to +6 V,
0 to 5 A
E3631A
0 to +25 V,
0 to 1 A
0 to –25 V,
0 to 1 A
E3632AE3633AE3634A
0 to 15 V/7 A or
0 to 30 V/4 A
0 to 8 V/20 A or
0 to 20 V/10 A
< 0.01% + 2 mV
< 0.01% + 250 μA
< 0.01% + 2 mV
< 0.01% + 250 μA
0 to 25 V/7 A or
0 to 50 V/ 4 A
Ripple and Noise (20 Hz to 20 MHz)
Normal Mode Voltage< 350 μVrms/2 mVpp< 350 μVrms/3
Opt. 0L2 Extra manual sets
Opt. 1CM Rackmount kit*
Opt. UK6 Commercial calibration
with test result data
E3600A-100 Test lead kit
Rackmount Kits*
Agilent E3631A/32A/33A/34A
To rackmount two instruments sideby-side
Lock-link Kit (P/N 5061-9694)
Flange Kit (P/N 5063-9214)
To rackmount one or two instruments
in a sliding support shelf
Support Shelf (P/N 5063-9256)
Slide Kit (P/N 1494-0015) required
for support shelf
* Rackmounting with 1CM or
lock-link/flange kit requires
Agilent or customer support rails
Agilent Support Rails-E3663AC
4
www.agilent.com
Quality Management SystemQuality Management Sy
s
Agilent Electronic Measurement Group
DEKRACertified
myAgilent
myAgilent
www.agilent.com/find/myagilent
A personalized view into the information
most relevant to you.
www.axiestandard.org
AdvancedTCA® Extensions for
Instrumentation and Test (AXIe) is
an open standard that extends the
AdvancedTCA for general purpose
and semiconductor test. Agilent
is a founding member of the AXIe
consortium.
www.lxistandard.org
LAN eXtensions for Instruments puts
the power of Ethernet and the Web
inside your test systems. Agilent is a
founding member of the LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation
(PXI) modular instrumentation
delivers a rugged, PC-based high-performance measurement and automation system.
Agilent Channel Partners
www.agilent.com/find/channelpartners
Get the best of both worlds: Agilent’s
measurement expertise and product
breadth, combined with channel
partner convenience.
Three-Year Warranty
www.agilent.com/find/ThreeYearWarranty
Agilent’s combination of product reliability
and three-year warranty coverage is another
way we help you achieve your business goals:
increased confidence in uptime, reduced cost
of ownership and greater convenience.
Agilent Advantage Services
www.agilent.com/find/AdvantageServices
Accurate measurements throughout the
life of your instruments.
ISO 9001:2008
www.agilent.com/quality
For more information on Agilent Technologies’ products, applications or services,
please contact your local Agilent office. The
complete list is available at:
www.agilent.com/find/contactus
Americas
Canada (877) 894 4414
Brazil (11) 4197 3600
Mexico 01800 5064 800
United States (800) 829 4444
Asia Pacific
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP Countries (65) 375 8100