This series of 200 watt and 1000
watt DC power supplies take the
place of multiple power supplies
in your test system by providing
maximum power at a variety of
operating points.
Industry standard SCPI commands
and VXIPlug&Play drivers make
system integration easy. Using the
serial link, up to 16 power supplies
can be connected through one
GPIB address. These power supplies
have excellent electrical efficiency,
making them a good choice for
large systems.
Application Notes:
10 Hints for Using Your Power Supply
to Decrease Test Time
5968-6359E
10 Practical Tips You Need to
Know About Your Power Products
5965-8239E
Agilent DC Power Supplies
for Base Station Testing
5988-2386EN
Basic DC Power Supplies essential features for a tight budget
Specifications
(at 0˚to 55˚C unless
otherwise specified)
6030A 6031A 6032A 6033A 6035A 6038A
More detailed specifications at
www.agilent.com/find/6030
25
Autoranging outputs provide maximum power at a variety
of operating voltages
Analog/resistance control of output voltage and current
Series and auto-parallel connections of multiple supplies
Built-in measurements and advanced programmable features
Protection features to ensure DUT safety
6030A, 6031A, 6032A, 6033A, 6035A, 6038A
Single-Output, Autoranging
200 W and 1000 W GPIB
Number of outputs 111111
GPIB Yes Yes Yes Ye s Yes Ye s
Output ratings
Output Voltage 0 to 200 V 0 to 20 V 0 to 60 V 0 to 20 V 0 to 500 V 0 to 60 V
Output Current 0 to 17 A 0 to 120 A 0 to 50 A 0 to 30 A 0 to 5 A 0 to 10 A
Maximum power watts 1,200 W 1,064 W 1,200 W 242 W 1,050 W 240 W
Autoranging output
V1, I1200 V, 5 A 20 V, 50 A 60 V, 17.5 A 20 V, 10 A 500 V, 2 A 60 V, 3.3 A
V2, I2120 V, 10 A 14 V, 76 A 40 V, 30 A 14 V, 17.2 A 350 V, 3 A 40 V, 6 A
V3, I360 V, 17 A 7 V, 120 A 20 V, 50 A 6.7 V, 30 A 200 V, 5 A 20 V, 10 A
Programming accuracy Voltage 0.035% 0.035% 0.035% 0.035% 0.25% 0.035%
at 25°C ±5°C +145 mV +15 mV +40 mV +9 mV +400 mV +40 mV
Current 0.2% 0.25% 0.2% 0.15% 0.3% 0.09%
+25 mA +250 mA +85 mA +20 mA +63 mA +10 mA
Ripple and noise Voltage rms 22 mV 8 mV 8 mV 3 mV 50 mV 3 mV
20 Hz to 20 MHz p-p 50 mV 50 mV 40 mV 30 mV 160 mV 30 mV
Current rms 15 mA 120 mA 25 mA 30 mA 50 mA 5 mA
Readback accuracy Voltage 0.08% 0.08% 0.08% 0.07% 0.5% 0.07%
at 25°C ±5°C +80 mV +7 mV +20 mV +6 mV +200 mV +50 mV
Current 0.36% 0.4% 0.36% 0.3% 0.5% 0.2%
+15 mA +100 mA +35 mA +25 mA +50 mA +11 mA
Load regulation
Voltage 0.01%+ 5 mV 3 mV 5 mV 2 mV 40 mV 3 mV
Current 0.01%+ 0.01%+ 0.01%+ 0.01%+ 0.03%+ 0.01%+
10 mA 15 mA 10 mA 9 mA 34 mA 5 mA
Line regulation
Voltage 0.01%+ 0.01%+ 0.01%+ 0.01%+ 0.03%+ 0.01%+
5 mV 2 mV 3 mV 1 mV 17 mV 2 mV
Current 0.01%+ 0.01%+ 0.01%+ 0.01%+ 0.03%+ 0.01%+
5 mA 25 mA 10 mA 6 mA 17 mA 2 mA
Transient response time Time 2 ms 2 ms 2 ms 1 ms 5 ms 1 ms
10% step change Level 150 mV 100 mV 100 mV 50 mV 200 mV 7 5 mV
V1
I1 I2 I3
Volts
P1
P2
P3
Amps
V2
V3
Autoranging Output:
0.6
128mm
5.04"
12.7mm
0.5"
425mm
16.75"
132.6mm
5.2"
12.7mm
0.5"
421.6mm
16.6"
77mm
3.03"
2.5mm
0.1"
Rear
Side
To p
Terminal Strip Detail
Screw Size
M3.5 x 0.6
VM
IM
M
VP
IP
P
B6
B1
+S
-S
26
Supplemental Characteristics
for all model numbers
Remote Sensing: Up to 2 V drop in each
lead. Voltage regulation specification met
with up to 0.5 V drop, but degrades for
greater drops.
Modulation: (analog programming of
output voltage and current)
Input signal: 0 to 5 V or 0 to 4 k Ohms
Software Driver:
VXIPlug&Play
Warranty: One year
Size: 6030A–32A, 6035A:
425.5 mm W x 132.6 mm H x 503.7 mm D
(16.75 in x 5.25 in x 19.83 in).
6033A, 6038A:
212.3 mm W x 177.0 mm H x 516.4 mm D
(8.36 in x 6.97 in x 17.87 in).
Autoranging: 200 W and 1000 W GPIB (Continued)
More detailed specifications at
www.agilent.com/find/6030
Basic DC Power Supplies essential features for a tight budget
Specifications
(at 0˚to 55˚C unless
otherwise specified)
6030A 6031A 6032A 6033A 6035A 6038A
Supplemental Characteristics (Non-warranted characteristics determined by design and
useful in applying the product)
Programming resolution Voltage 50 mV 5 mV 15 mV 5 mV 125 mV 1 5 mV
Current 4.25 mA 30 mA 12.5 mA 7.5 mA 1.25 mA 2.5 mA
DC floating voltage ±550 V ±240 V ±240 V ±240 V ±550 V ±240 V
either terminal can be grounded
or floated from chassis ground
AC input current 100 Vac 24 A 24 A 24 A 6 A 24 A 6 A
120 Vac 24 A 24 A 24 A 6.5 A 24 A 6.5 A
220 Vac 15 A 15 A 15 A 3.8 A 15 A 3.8 A
240 Vac 14 A 14 A 14 A 3.6 A 14 A 3.6 A
Weight Net 16.3 kg 17.2 kg 16.3 kg 9.6 kg 16.3 kg 9.6 kg
(36 lb) (38 lb) (36 lb) (21 lb) (36 lb) (21 lb)
Shipping 21.8 kg 22.7 kg 21.8 kg 11.4 kg 21.8 kg 11.4 kg
(48 lb) (50 lb) (48 lb) (25 lb) (48 lb) (25 lb)
Agilent Models: 6030A, 6031A, 6032A, 6035A
27
Ordering Information
Opt 001 Front panel has only line switch,
line indicator, and OVP adjust
(6030A–33A and 6038A only)
Opt 100 87 to 106 Vac, 48 to 63 Hz
(power supply output is derated to 75%)
Opt 120 104 to 127 Vac, 47 to 63 Hz
Opt 220 191 to 233 Vac, 48 to 63 Hz
Opt 240 209 to 250 Vac, 48 to 63 Hz
Opt 800 Rack-mount Kit for Two
Half-rack Units Side by Side.
Lock link Kit p/n 5061-9694 and
7 in Rack adapter Kit 5063-9215
* Opt 908 Rack-mount Kit for a Single
Half-rack Unit 6033A and 6038A
(with blank filler panel); p/n 5062-3960,
6030A–32A and 6035A; p/n 5062-3977
* Opt 909 Rack-mount Kit with Handles.
For 6030A–32A, 6035A; p/n 5062-3983
Autoranging: 200 W and 1000 W GPIB (Continued)
More detailed specifications at
www.agilent.com/find/6030
Basic DC Power Supplies essential features for a tight budget
Opt 0L1 Full documentation on
CD-ROM, and printed standard
documentation package
Opt 0L2 Extra copy of standard
printed documentation package
Opt 0B3 Service Manual
Opt 0B0 Full documentation
on CD-ROM only
Opt J01 Stabilization for loads up to
10 Henries (not available on 6033A)
A line cord option must be specified,
see the AC line voltage and cord section.
* Support rails required
212.3mm
8.36"
421.6mm
16.6"
16.5mm
0.65"
22.0mm
0.87"
19.6mm
0.77"
177.0mm
6.97"
31.8mm
1.25"
To p
Side
Rear
170.6mm
6.72"
13.5mm
0.53"
208.8mm
8.22"
Terminal Strip Detail
Screw Size
M3.5 x 0.6
VM
IM
M
VP
IP
P
B6
B1
Agilent Models: 6033A, 6038A
Accessories
5080-2148 Serial Link Cable,
2 m (6.6 ft)
1494-0060 Rack Slide Kit
E3663AC Support rails
for Agilent rack
cabinets
Your Requested Excerpt from the
Agilent System and Bench Instruments Catalog 2006
The preceding page(s) are an excerpt from the 2006 System
and Bench Instruments Catalog. We hope that these pages supply
the information that you currently need. If you would like to
have further information about the extensive selection of Agilent
DC power supplies, please visit
www.agilent.com/find/power to print
a copy of the complete catalog, or to request that a copy be sent
to you. You will also find a lot of other useful information on
this Web site.
In the full System and Bench Instruments Catalog, you will
find that Agilent offers much more than DC power supplies. This
catalog contains detailed technical and application information
on digital multimeters, DC power supplies, arbitrary waveform
generators, and many more instruments. If you need basic, clean,
power for your lab bench, it’s there. In each power product
category we have also integrated the capabilities you need for
a complete power solution, including extensive measurement
and analysis capabilities.
Please give us a call at your local Agilent Technologies sales
office, or call a regional office listed, for assistance in choosing
or using Agilent power products.
Keep up to date with Agilent’s Test and Measurement Email Updates
As an Email Update subscriber, you will receive periodic
customized email updates that match the areas of interest
that you have specified. Your update will include products
and services, applications and support information, events and
promotions. Sign up today at www.agilent.com/find/emailupdates.
Check off DC power supplies, AC power sources or electronic
loads on your registration form, and we will promptly let you
know what’s new in power products. Our Privacy Statement at
www.agilent.com/go/privacy describes our commitment to you
regarding your privacy.
www.agilent.com
For more information on Agilent
Technologies’ products, applications
or services, please contact your local
Agilent office. The complete list is
available at:
www.agilent.com/find/contactus
Phone or Fax
United States:
(tel) 800 829 4444
(fax) 800 829 4433
Canada:
(tel) 877 894 4414
(fax) 800 746 4866
China:
(tel) 800 810 0189
(fax) 800 820 2816
Europe:
(tel) 31 20 547 2111
Japan:
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
Korea:
(tel) (080) 769 0800
(fax) (080) 769 0900
Latin America:
(tel) (305) 269 7500
Taiwan:
(tel) 0800 047 866
(fax) 0800 286 331
Other Asia Pacific Countries:
(tel) (65) 6375 8100
(fax) (65) 6755 0042
Email: tm_ap@agilent.com
Contacts revised: 09/26/05
Product specifications and descriptions in
this document subject to change without
notice.
© Agilent Technologies, Inc. 2006
Printed in the USA, February 8, 2006
Agilent Technologies
Loading...