ASUS RTAX2D00 User Manual

Quick Start Guide

RT-AX92U

Wireless AX6100 Tri band Gigabit Router

BEFORE SETTING

Hardware Explanations

Plug the adapter into the DCIN port, and press the power button.

The Power, 2.4GHz and 5GHz LEDs will light up when your hardware is ready.

Button Explanations

Power button

DCIN

port

WAN

WPS

button

port

LAN port 1-4

USB 2.0

port

USB 3.0

port

RESET BUTTON

Reset the system to its factory default settings.

WAN PORT

Connect your modem to this port with a network cable.

LAN PORT 1-4

Connect your PC to a LAN port with a network cable.

Reset

button

USB Explanations

01 02

Preparing to setup a standalone router

Go to ONE ROUTER SETUP STEPS.

ONE ROUTER SETUP AiMesh SETUP STEPS

Preparing to setup an AiMesh Wi-Fi system

Two (2) ASUS routers (models supporting AiMesh https://www.asus.com/AiMesh/).

Assign one as AiMesh router, and another one as AiMesh node.

** If you have multiple AiMesh routers, we recommend using the router with the highest speciﬁcations as your AiMesh router and the others as AiMesh nodes.

Go to AiMesh SETUP STEPS.

AiMesh routerAiMesh node

ONE ROUTER SETUP STEPS

Prepare your Modem

Unplug the power of cable / DSL modem.

If it has a battery backup, remove the battery.

2 4

Connect your modem

network cable provided.

Power on the modem.

Plug modem to the power outlet and power on.

WE SUGGEST...

Check the modem LED lights to ensure the connection is active.

If you are using DSL for internet, you will need your username / password

(

from your Internet service provider (ISP) to properly configure your router.

(

Connect your Device

Power on the router.

Plug in and press the

power button at the back of your router.

Check the WAN and

2.4GHz / 5GHz LED lights to ensure the hardware connection is ready.

AiMesh

Prepare

Place your AiMesh router and node within 1-3 meters of each other during the setup process.

SETUP STEPS

Connect your PC to the router using an additional

network cable.

02 03

Open a web browser.

You will be redirected to the ASUS Setup Wizard. If not, navigate to http://router.asus.com.

within

1-3 meter

AiMesh node

Factory default status. Keep power on and standby for AiMesh system setting.

AiMesh routerAiMesh node

AiMesh router

Refer to ONE ROUTER SETUP STEPS to connect your AiMesh router to your PC and modem, and then log in into the web GUI.

Modem

AiMesh router AiMesh node

Go to Network Map page, click AiMesh icon and then Search for your extending AiMesh node.

** If you cannot ﬁnd the AiMesh icon here, click on ﬁrmware version and update the ﬁrmware.

Network Map

AiMesh node

AiMesh

Find AiMesh node

Click Search, it will automatically search for your AiMesh node. When the AiMesh node

shows on this page, click it to add it into the AiMesh system.

If you cannot ﬁnd any AiMesh node, please go to "TROUBLE SHOOTING ".

AiMesh

Find AiMesh

RT-ABCDE

34:97:F6:5F:6C:50

Cannot find any router?

Find AiMesh

AiMesh

RT-ABCDE

34:97:F6:5F:6C:50

Cannot find any router?

A message is displayed when synchronization is completed.

Successfully added RT-ABCDE to your AiMesh system, it will take awhile to show up as connected in the AiMesh router list.

Congratulations!

You will ﬁnd the pages below show up when an AiMesh node has been successfully added to the AiMesh network.

AiMesh routers in your network

AiMesh

RT-ABCDE

34:97:F6:5F:6C:50

TROUBLE SHOOTING

If your AiMesh router cannot ﬁnd any AiMesh node nearby or synchronization fails, please check followings and try again.

Move your AiMesh node closer to the AiMesh router ideally. Ensure it is within 1-3 meters.

RELOCATION

THE BEST PERFORMANCE

Locate AiMesh router and node at best place.

Your AiMesh node is powered on.

NOTE:

To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens.

We recommend that you place the routers in an open or spacious location.

ASUS ROUTER APP

Download free ASUS Router APP to setup and manage your router(s).

ASUS Router

FAQ

FREQUENTLY ASKED QUESTIONS

Does the AiMesh router support Access Point mode?

A : Yes. You can choose to set the AiMesh router as router mode or access point mode. Please go to web GUI ( http://router.asus.com ), and go to the page Administration Operation Mode.

Operation Mode

Administration - Operation Mode

Save

Could I setup wired connection between AiMesh routers (Ethernet backhaul)?

A : Yes. AiMesh system supports both wireless and wired connection between AiMesh router and node to maximize throughput and stability. AiMesh

Follow the setup steps to establish a connection between the AiMesh router and node via Wi-Fi ﬁrst.

Place the node in the ideal locations for best coverage. Run an Ethernet cable from the LAN port of the AiMesh router to the WAN port of AiMesh node.

analyzes the wireless signal strength for each frequency band available, and then determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone.

AiMesh system will auto-select the best path for data transmission, whether wired or wireless.

LAN-WAN

Specications:

DC Power adapter

Operating Temperature

Operating Humidity

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de

satellites mobiles utilisant les mêmes canaux.

IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 29cm between the radiator & your body.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 29cm de distance entre la source de rayonnement et votre corps.

Safety Notices:

-Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).

-Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.

-DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

-DO NOT place or drop objects on top and do not shove any foreign objects into the product.

-DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.

-DO NOT cover the vents on the product to prevent the system from getting overheated.

-DO NOT use damaged power cords, accessories, or other peripherals.

-If the Adapter is broken, do not try to x it by yourself. Contact a qualied service technician or your retailer.

-To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

DC Output: +19V with max 1.75A current

0~40°C

50~99%

This device is restricted for indoor use.

Storage

0~70°C

20~90%