ASUS MT276HE, MT276H, MT276H-A User Manual

MT276 Series LCD Monitor
User’s Manual
E5082
First Edition V1 November 2009
Copyright © 2009ASUSTeK COMPUTER INC. All Rights Reserved.
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
ASUS MT276 Series LCD Monitor ii

Contents

Contents .............................................................................................iii
Notices ................................................................................................iv
Safety Information ..............................................................................v
Care and Cleaning .............................................................................vi
Recycling Place................................................................................viii
1.1 Welcome! ....................................................................................11
1.2 Package Contents .....................................................................11
1.3 Monitor Introduction................................................................12
1.3.1 Front view.......................................................................................... 12
1.3.2 Top view ............................................................................................ 13
1.3.3 Rear view ........................................................................................... 15
1.4 Remote Controller Introduction.............................................16
2.1 Assembling the Monitor ...........................................................18
2.2 Adjusting the Posture of the Monitor....................................18
2.3 Detaching the arm/base (only for the MT276) ...................19
2.4 Connecting the Monitor ...........................................................20
2.4 Turning the Monitor On............................................................21
2.5 Setting the Monitor...................................................................21
3.1 On-Screen Display (OSD) Menu..............................................22
3.1.1 How to reconfigure ........................................................................... 22
3.1.2 OSD menu introduction.................................................................... 22
3.2 Specifications Summary ..........................................................27
3.3 Troubleshooting (FAQ).............................................................29
3.4 Supported Operating Modes ...................................................30
ASUS MT276 Series LCD Monitor iii

Notices

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’ s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The use of shielding cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
As an Energy Star® Partner, our company has determined that this product meets the Energy Star® guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
ASUS MT276 Series LCD Monitor iv

Safety Information

Before setting up the monitor, carefully read all the documentation that came with
the package.
To prevent fire or shock hazard, never expose the monitor to rain or moisture.
Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer immediately.
Slots and openings on the back or top of the cabinet are provided for ventilation.
Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
Use the appropriate power plug which complies with your local power standard.
Do not overload power strips and extension cords. Overloading can result in fire
or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the monitor in any
area where it may become wet. Place the monitor on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long period of
time. This will protect the monitor from damage due to power surges.
Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed computers
which have appropriate configured receptacles marked between 100-240V AC.
If you encounter technical problems with the monitor, contact a qualified service
technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check regulations for disposal of electronic products.
ASUS MT276 Series LCD Monitor v

Care and Cleaning

Before you lift or reposition your monitor, it is better to disconnect the cables and
power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the monitor by the stand or the cord.
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for
use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service centre to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
CAUTION: Information to prevent damage to the components when trying
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
complete a task.
to complete a task.
ASUS MT276 Series LCD Monitor vi
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
ASUS MT276 Series LCD Monitor vii

Recycling Place

EUROPE
When disposing of ASUS products in Europe, please contact one of the following locations to make arrangements for recycling.
ASUS France S.A.R.L.
10 allee bienvenue, 93160, noisy le grand, France Tel: +33 1 49 32 96 50
ASUS COMPUTER GmbH (Germany)
Harkortstr. 21 – 23, 40880 Ratingen, Deutschland Hotline: +49 01805 / 010920 ( Mo – Fr / 9 – 17h) Fax: +49 2102 9599-11 (24h)
ASUSTeK Italy srl
Via Piero Gobetti 2/B Centro direzionale Villa Fiorita 20063 Cernusco sul Naviglio (MI), Italy Tel: +39 199400089 Fax: +39 02 20240555
ASUSTek UK Ltd.
1st Floor, Focus 31, West Wing, Mark Road, Hemel Hempstead, HP2 7BW, UK Tel: +44 1442 202 700 Fax: +44 1442 245 882
ASUS IBERICA S.L.
C/ Plomo 5-7, 08038 Barcelona, Spain Tel: +34 902 889688
ASUS Nordic AB
Finlandsgatan 16, 4 Tr., 16474 Kista, Sweden Tel: +46 8 5889 8900 Fax: +46 8 5889 8999
ASUS Computer Benelux B.V.
Fultonbaan 12 3439 NE Nieuwegein The Netherlands Tel: +31.30.60.22.452 Hotline: +31 (0)591-668190 Fax: +31 (0)591-666853
ASUS Computer Czech Republic S.R.O.
V Olsinach 2300/75, 10000 Prague, Czech Republic Tel: +420 274 774 872 Fax: +420 274 774 889
ASUS Polska SP. Z.O.O.
Al. Jerozolimskie 200, 02-222 Warsaw 4 floor, Poland Tel: +48 22 571 80 00 Fax: +48 22 571 80 01
ASUS Hungary Kft.
Tel: +36 1 505 45 61 Fax: +36 1 505 45 63
ASUS MT276 Series LCD Monitor viii
NORTH AMERICA
When disposing of ASUS products in North America, please contact the following locations to make arrangements for recycling.
ASUS COMPUTER INTERNATIONAL (America)
US Headquarters:
800 Corporate Way, Fremont, CA 94539, USA Tel: +1 510-739-3777 Fax: +1 510-608-4555
Canada Branch Office:
802 Cochrane Dr., Unit 2, Markham ON, L3R 8C9, Canada Tel: (905) 370-2787 Fax: (905) 489-2718
ASIA PACIFIC
When disposing of ASUS products in Asia Pacific, please contact the following location to make arrangements for recycling.
ASUSTeK COMPUTER INC.
No. 15, Li-Te Rd., Peitou, Taipei, Taiwan Tel: +886-2-2894-3447 Hotline: +886-(0)800-093-456 Fax: +886-2-2895-9254
“THIS UNIT IS AN ELECTRIC DEVICE WHICH MAY CONTAIN HAZARDOUS MATERIALS AND COMPONENTS, AND WHICH MUST BE DISPOSED OF AT END OF LIFE ACCORDING TO THE PROPER PROCEDURE”
ASUS MT276 Series LCD Monitor ix
Loading...
+ 21 hidden pages