No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE
OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
The product name and revision number are both printed on the product itself. Manual
revisions are released for each product design represented by the digit before and after the
period of the manual revision number. Manual updates are represented by the third digit in
the manual revision number.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME
WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.
ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
Electrical and Audio Specifications ............................ 26
3
FCC/CDC Statements
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
•This device may not cause harmful interference, and
•This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
WARNING!
The use of shielded cables for connection of the
monitor to the graphics card is required to assure compliance with
FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
4
ASUS Contact Information
ASUSTeK COMPUTER INC. (Asia-Pacific)
Address:150 Li-Te Road, Peitou, Taipei, Taiwan 112
General Tel:+886-2-2894-3447
General Fax:+886-2-2894-3449
General Email:info@asus.com.tw
Technical Support
MB/Others (Tel):+886-2-2890-7121 (English)
Notebook (Tel):+886-2-2890-7122 (English)
Desktop/Server (Tel):+886-2-2890-7123 (English)
Support Fax:+886-2-2890-7698
Support Email:tsd@asus.com.tw
Web Site:www.asus.com.tw
Newsgroup:cscnews.asus.com.tw
ASUS COMPUTER INTERNATIONAL (America)
Address:6737 Mowry Avenue, Mowry Business Center,
Building 2, Newark, CA 94560, USA
General Fax:+1-510-608-4555
General Email:tmd1@asus.com
Technical Support
Support Fax:+1-510-608-4555
Notebook (Tel):1-877-918-ASUS (2787)
Web Site:www.asus.com
Support Email:tsd@asus.com
ASUS COMPUTER GmbH (Europe)
Address:Harkortstr. 25, 40880 Ratingen, BRD, Germany
General Fax:+49-2102-442066
General Email:sales@asuscom.de (for marketing requests only)
Technical Support
Support Hotline:MB/Others: +49-2102-9599-0
Notebook (Tel):+49-2102-9599-10
Support Fax:+49-2102-9599-11
Support (Email):www.asuscom.de/de/support (for online support)
Web Site:www.asuscom.de
5
Safety Information
Observe the following precautions before installing and using the ASUS
CRW-2410A Drive!
Installation Notices
Do not place this device in an
unstable position, or in one that
vibrates.
Do not place this device in areas
where there is direct sunlight,
high humidity, or damp condition.
Do not use or place this device
near magnetic fields, televisions,
or radios, where there is
interference that may affect the
performance of the drive.
Do not attempt to disassemble or
repair the drive. Opening the drive
may result to exposure to laser
radiation.
6
Safety Information
SAFETY WARNINGS
CAUTION1. Use of any controls, adjustments, or procedures
other than those specified in this manual may
result to hazardous radiation exposure.
2. To prevent exposure to laser emanations (harmful
to human eye), do not attempt to disassemble the
drive.
Using the Device
•Do not move the device from a cold to a warm or hot environment.
Drastic change of temperature is harmful to the device.
•Before moving or uninstalling the drive, remove a disc from it, if any.
•Prevent liquids or any metal to get into the device. If this situation
occurs, contact your retailer for help.
•Do not use any evaporating solvents to clean the device. If you
accidentally sprayed any solvent on the device, use a clean cloth to
wipe it. You may also use a neutral cleaner to dilute the solvent to
easily wipe it from the device.
•Try not to interrupt the supply of power while the device is in reading or
writing mode.
•Do not place damaged or warped discs inside the device. A warped
disc may break while in use and damage the device.
•Do not place discs into the device immediately if they came from a cold
environment, specially during cold seasons. Wait until the discs have
reached room temperature.
7
Package Contents
Upon opening your ASUS CRW-2410A drive package, check if all the
following items are present and in good condition. If any of the items is
damaged or missing, contact your retailer immediately.
•ASUS CRW-2410A internal IDE drive
•IDE cable
•Mounting screw package
•Wire cable
•Emergency eject pin
•ASUS High- Speed CD-R blank disc
•ASUS High-Speed CD-RW blank disc
•User’s Manual
•Multi-language Quick Installation Guide
•Bundled software CD
NOTE:
8
The above items are available in retail boxes only.
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.