Setting up your SSD as a cache device
A. Setting the SATA mode to RAID
1.On Windows® 8 bootup, press <Del> or <F2> on your keyboard to enter the BIOS Setup program.
2.Press <F7> on your keyboard and click OK to enter the Advanced Mode screen.
3.From the Advanced Mode screen, click
Advanced > SATA Configuration.
4.From the SATAConfiguration screen, click SATA Mode Selection, then select RAID.
5.Press <F10> on your keyboard and click Yes to save the changes and exit the BIOS Setup program.
E8530 / First Edition / July 2013
B. Creating a partition on your SSD
1.On your keyboard, press and <D> to launch the Windows® 8 desktop.
2.Right-click Computer and click Manage to launch the Computer Management screen.
3.Click Disk Management to show the disks’ details.
4.Right-click on the disk with 32GB or 64GB capacity and select Delete Volume.
5.Click Yes to confirm the volume deletion. The SSD volume displays the status Unallocated.