ASUS E7973 User Manual

P8H77-M PRO

Motherboard

E7973 Third Edition

December 2012

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either

(1) for free by downloading it from http://support.asus.com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location

where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc. Legal Compliance Dept. 15 Li Te Rd., Beitou, Taipei 112 Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.

This offer is valid to anyone in receipt of this information. ASUSTeK is eager to duly provide complete source code as required under various Free Open Source

Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notication to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).

Contents ...................................................................................................................... iii

Safety information ...................................................................................................... vi

About this guide ........................................................................................................ vii

P8H77-M PRO specications summary ...................................................................ix

Chapter 1: Product introduction

1.1 Welcome! ....................................................................................................1-1

1.2 Package contents

1.3 Special features

1.3.1 Product highlights

1.3.2 DIGI+ VRM Digital Power Design ...............................................

1.3.3 ASUS Exclusive Features ...........................................................

1.3.4 ASUS Quiet Thermal Solution .....................................................

1.3.5 ASUS EZ DIY ..............................................................................

1.3.6 Other special features .................................................................

Chapter 2: Hardware information

2.1 Before you proceed ...................................................................................2-1

2.2 Motherboard overview ...............................................................................

2.2.1 Motherboard layout .....................................................................

2.2.2 Central Processing Unit (CPU) ...................................................

2.2.3 System memory ..........................................................................

2.2.4 Expansion slots .........................................................................

2.2.5 Jumper ......................................................................................

2.2.6 Onboard switches .....................................................................

2.2.7 Onboard LEDs ..........................................................................

2.2.8 Internal connectors

2.3 Building your computer system .............................................................

2.3.1 Additional tools and components to build a PC system ............

2.3.2 CPU installation

2.3.3 CPU heatsink and fan assembly installation .............................

2.3.4 DIMM installation

2.3.5

2.3.6

2.3.7

2.3.8 Front I/O Connector ..................................................................

2.3.9 Expension Card installation

2.3.10 Rear panel connection ..............................................................

2.3.11 Audio I/O connections ...............................................................

....................................................................................... 1-1

.......................................................................................... 1-2

........................................................................ 1-2

.................................................................... 2-21

......................................................................... 2-30

....................................................................... 2-34

Motherboard installation ............................................................ 2-35

ATX Power connection .............................................................. 2-37

SATA device connection ............................................................ 2-38

....................................................... 2-40

1-3

1-4

1-5

1-6

2-2

2-4

2-5

2-14

2-16

2-17

2-19

2-29

2-32

2-39

2-41

2-43

iii

Contents

2.4 Starting up for the rst time .................................................................... 2-45

2.5 Turning off the computer .........................................................................

Chapter 3: BIOS setup

3.1 Knowing BIOS ............................................................................................3-1

3.2 BIOS setup program ..................................................................................

3.2.1 EZ Mode

3.2.2 Advanced Mode ..........................................................................

3.3 Main menu ..................................................................................................

3.4 Ai Tweaker menu ........................................................................................

3.5 Advanced menu .......................................................................................

3.5.1 CPU Conguration ....................................................................

3.5.2 PCH Conguration ....................................................................

3.5.3 SATA Conguration ...................................................................

3.5.4 System Agent Conguration

3.5.5 USB Conguration ....................................................................

3.5.6 Onboard Devices Conguration ................................................

3.5.7 APM ..........................................................................................

3.5.8 Network Stack ...........................................................................

3.6 Monitor menu ...........................................................................................

3.7 Boot menu ................................................................................................

3.8 Tools menu ...............................................................................................

3.8.1 ASUS EZ Flash 2 Utility ............................................................

3.8.2 ASUS O.C. Prole .....................................................................

3.8.3 ASUS SPD Information .............................................................

3.9 Exit menu ..................................................................................................

3.10 Updating BIOS ..........................................................................................

3.10.1 ASUS Update utility

3.10.2 ASUS EZ Flash 2 utility .............................................................

3.10.3 ASUS CrashFree BIOS 3 utility

3.10.4 ASUS BIOS Updater .................................................................

...................................................................................... 3-2

...................................................... 3-19

................................................................... 3-32

................................................. 3-36

2-45

3-1

3-3

3-5

3-7

3-13

3-14

3-16

3-18

3-20

3-21

3-23

3-24

3-27

3-29

3-30

3-31

3-32

3-35

3-37

Chapter 4: Software support

4.1 Installing an operating system .................................................................4-1

4.2 Support DVD information ..........................................................................

4.2.1 Running the support DVD ...........................................................

4.2.2 Obtaining the software manuals

.................................................. 4-2

4-1

Contents

4.3 Software information .................................................................................4-3

4.3.1 AI Suite II

4.3.2 TurboV EVO ................................................................................

4.3.3 DIGI+ VRM ..................................................................................

4.3.4 EPU .............................................................................................

4.3.5 FAN Xpert

4.3.6 Probe II

4.3.7 USB 3.0 Boost

4.3.8 MyLogo2 ...................................................................................

4.3.9 Audio congurations

4.4 Introduction to Intel

4.4.1 System Requirements ..............................................................

4.4.2 Intel

4.4.3 Intel

4.4.4 Intel

4.5 RAID congurations ................................................................................

4.5.1 RAID denitions ........................................................................

4.5.2 Installing Serial ATA hard disks .................................................

4.5.3 Setting the RAID item in BIOS ..................................................

4.5.4 Intel

4.6 Creating a RAID driver disk

4.6.1 Creating a RAID driver disk without entering the OS ................

4.6.2 Creating a RAID driver disk in Windows

4.6.3 Installing the RAID driver during Windows

4.6.4 Using a USB oppy disk drive ...................................................

..................................................................................... 4-3

.................................................................................... 4-9

...................................................................................... 4-10

........................................................................... 4-11

.................................................................. 4-14

2012 Desktop responsiveness technologies .... 4-15

Smart Response Technology ........................................... 4-17

Rapid Start Technology .................................................... 4-18

Smart Connect Technology .............................................. 4-24

Rapid Storage Technology Option ROM utility ................4-28

..................................................................... 4-32

.................................. 4-32

OS installation ...... 4-33

4-4

4-6

4-8

4-12

4-15

4-27

4-28

4-32

4-34

Chapter 5: Multiple GPU technology support

5.1 ATI® CrossFireX™ technology ..................................................................5-1

5.1.1 Requirements ..............................................................................

5.1.2 Before you begin .........................................................................

5.1.3 Installing two CrossFireX™ graphics cards ................................

5.1.4 Installing the device drivers .........................................................

5.1.5 Enabling the ATI

CrossFireX™ technology ...............................5-3

5.2 LucidLogix Virtu MVP ................................................................................

Installing LucidLogix Virtu MVP .................................................................... 5-4

Setting up your display ................................................................................. 5-5

Conguring LucidLogix Virtu MVP ...............................................................5-6

Appendices .............................................................................................................. A-1

Notices ....................................................................................................................

ASUS contact information ...................................................................................... A-4

5-1

5-2

5-3

5-4

A-1

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a component.

• Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding components, carefully read all the manuals that came with the package.

• Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuit, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area where the product may be exposed to moisture.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualied service

technician or your retailer.

About this guide

This user guide contains the information you need when installing and conguring the motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard.

• Chapter 2: Hardware information

This chapter lists hardware setup procedures you have to perform when installing system components. It includes descriptions of the switches, jumpers, and connectors on the motherboard.

• Chapter 3: BIOS setup

This chapter provides a detailed guide to navigating and setting up the BIOS.

• Chapter 4: Software support

This chapter describes the contents of the support DVD that comes with the motherboard package and the software.

• Chapter 5: Multiple GPU technology support

This chapter describes how to install and congure multiple ATI® CrossFireX™ and

NVIDIA® SLI™ graphics cards.

Where to nd more information

Refer to the following sources for additional information and for product and software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty yers,

that may have been added by your dealer. These documents are not part of the standard package.

vii

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when completing a task.

CAUTION: Information to prevent damage to the components when completing a task.

IMPORTANT: Instructions you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italic

s Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the

means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or Return key.

key names are linked with a plus sign (+). Example: <Ctrl> + <Alt> + <Del>

viii

P8H77-M PRO specications summary

CPU

Chipset

Memory

Expansion slots

Graphics

Multi-GPU support

LGA1155 socket for Intel® 3rd / 2nd Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® Processors Supports 22nm and 32nm CPU Supports Intel® Turbo Boost Technology 2.0* * The Intel® Turbo Boost Technology 2.0 support depends on the

CPU types.

** Refer to www.asus.com for Intel® CPU support list.

Intel® H77 Express Chipset

4 x DIMMs, max. 32GB*, DDR3 2200(O.C.)** / 2133(O.C.) / 2000(O.

C.) / 1866(O.C.) / 1600 / 1333 / 1066 MHz, non-ECC, un-buffered

memory Dual-channel memory architecture Supports Intel® Extreme Memory Prole (XMP) * The Max. 32GB memory capacity can be supported with DIMMs

of 8GB (or above). ASUS will update QVL once the DIMMs are available on market.

** Due to the CPU behavior, DDR3 2133/1866 MHz memory module

will run at DDR3 2000/1800MHz frequency.

*** DDR3 1600 MHz and higher memory frequency is supported by

Intel® 3rd generation processors.

1 x PCI Express 3.0*/2.0 x16 slot [blue] (at x16 mode) 1 x PCI Express 2.0 x16 slot [black] (max. at x4 mode, compatible

with PCIe x1 and x4 devices) 2 x PCI Express 2.0 x1 slots * PCIe 3.0 speed is supported by Intel® 3rd generation CoreTM

processors.

Integrated Graphics Processor - Intel® HD Graphics support Multi-VGA output support: DisplayPort, HDMI, DVI, RGB port

- Supports DisplayPort 1.1a with max. resolution

2560x1600@60Hz

- Supports HDMI with max. resolution 1920 x 1200@60Hz

- Supports DVI with max. resolution 1920 x 1200@60Hz

- Supports RGB with max. resolution 2048 x 1536@75Hz

- Supports Intel

InTru™ 3D/Insider™/Quick Sync Video/Clear

Video HD Technology/HD Graphics

- Maximum shared memory of 1696MB

Supports ATI® Quad-GPU CrossFireX™ Technology Supports LucidLogix Virtu MVP Technology* * LucidLogix Virtu MVP Technology supports Windows

7 Operating

Systems.

(continued on the next page)

P8H77-M PRO specications summary

Storage

LAN

Audio

USB

Intel® H77 Express Chipset:

- 2 x Serial ATA 6Gb/s connectors (gray) with RAID 0, 1, 5, 10 support

- 4 x Serial ATA 3Gb/s connectors (blue) with RAID 0, 1, 5, 10

support

- Supports Intel

Smart Response Technology, Intel® Rapid Start

Technology, Intel® Smart Connect Technology*

Marvell® PCIe SATA 6.0 Gb/s controller**

- 1 x eSATA port at the back I/O (6.0 Gb/s ready)

- 1 x Serial ATA 6.0Gb/s connector (navy blue)

* Supports on Intel® CoreTM processor family with Windows® 7

Operating Systems.

** These SATA ports are for data storage only. ATAPI devices are not

supported.

Realtek® RTL8111F Gigabit LAN controller

Realtek ALC892 8-Channel High Denition Audio CODEC

- Absolute Pitch 192khz/24bit true BD lossless sound

- BD Audio Layer Content Protection

- Supports Jack-Detection, Multi-streaming and Front Panel JackRetasking

- Optical S/PDIF out port at back I/O

Intel® H77 Express Chipset - supports ASUS USB 3.0 Boost UASP Mode*

- 2 x USB 3.0/2.0 ports at mid-board for front panel support

- 2 x USB 3.0/2.0 ports at back panel (blue)

Intel® H77 Express Chipset

- 10 x USB 2.0/1.1 ports (6 ports at mid-board, 4 ports at back panel)

* The USB 3.0 ports only support Windows® 7 or later versions.

UASP standard only supports Windows® 8.

(continued on the next page)

P8H77-M PRO specications summary

ASUS unique features

ASUS exclusive overclocking features

ASUS DIGI+ VRM

- Digital Power Control: Digital Power Design for the CPU and iGPU

- ASUS 4+1+1 Phase Power Design

ASUS EPU

- EPU, EPU swtich

ASUS Exclusive Overclocking Features:

- ASUS Network iControl featuring instant network

bandwidth domination for top network program in use

- ASUS USB 3.0 Boost featuring the latest USB 3.0 UASP standard

- ASUS Disk Unlocker featuring 3TB+ HDD support

- 100% All High-quality Conductive Polymer Capacitors

- ASUS GPU Boost

- ASUS Turbo V

- ASUS MemOK!

- ASUS AI Suite II

- ASUS Low EMI

- ASUS ESD

ASUS Q-Design

- ASUS Q-Shield

- ASUS Q-Slot

- ASUS Q-DIMM

- ASUS Q-Connector

ASUS Quiet Thermal Solution

- ASUS Fanless Design: Stylish Heatsink and MOS

Heatsink Solution

- ASUS Fan Xpert

ASUS EZ DIY

- ASUS UEFI BIOS EZ Mode featuring friendly graphics

user interface

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 2

- ASUS MyLogo 2

Precision Tweaker 2:

- vCore: Adjustable CPU voltage at 0.005V increment

- vCCSA: 191-step system agent voltage control

- vDRAM Bus: 191-step Memory voltage control

- vPCH: 191-step Chipset voltage control

- iGPU: 127-step iGPU voltage control

- vCPU_PLL: 1-step CPU & PCH PLL voltage control

SFS (Stepless Frequency Selection)

- BCLK/PCIE frequency tuning from 80MHz up to 300MHz at 1MHz increment

Overclocking Protection:

- ASUS C.P.R.(CPU Parameter Recall)

(continued on the next page)

P8H77-M PRO specications summary

Rear panel I/O ports

Internal I/O connectors

BIOS features

Manageability

1 x PS/2 Keyboard/Mouse COMBO port 1 x Optical S/PDIF out port 1 x LAN (RJ-45) port 1 x DisplayPort 1 x HDMI port 1 x DVI port 1 x RGB port 4 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports 1 x eSATA 6.0Gb/s port 8-channel audio ports

1 x USB 3.0/2.0 connector supports additional 2 USB

3.0/2.0 ports

3 x USB 2.0/1.1 connectors support additional 6 USB

2.0/1.1 ports 1 x System panel connector 1 x S/PDIF Out connector 1 x AAFP connector 4 x SATA 3.0 Gb/s connectors (blue) 3 x SATA 6.0 Gb/s connectors (2 x gray, 1 x navy blue) 1 x Front panel audio connector 1 x CPU fan connector (4-pin) 2 x Chassis fan connector (4-pin) 1 x Power fan connector (3-pin) 1 x COM connector 1 x LPT connector 1 x Clear CMOS Jumper 1 x 24-pin EATX Power connector 1 x 8-pin EATX 12V Power connector 1 x EPU Switch 1 x GPU Switch 1 x MemOK! Button

64 Mb Flash ROM, UEFI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.7, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree BIOS 3, F12 PrintScreen Function, F3 Shortcut Function and ASUS DRAM SPD (Serial Presence Detect) memory information

WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE

(continued on the next page)

xii

P8H77-M PRO specications summary

Accessories

2 x Serial ATA 6.0Gb/s cables 2 x Serial ATA 3.0Gb/s cables 1 x User’s manual 1 x ASUS Q-Shield 1 x 2-in-1 Q-connector (retail version only) 1 x Support DVD

Support DVD contents

Drivers ASUS Update ASUS Utilities Anti-virus software (OEM version)

Form factor

*Specications are subject to change without notice.

uATX Form Factor, 9.6”x 9.6” (24.5cm x 24.5cm)

xiii

xiv

Chapter 1

User Manual

Chapter 1: Product introduction

1.1 Welcome!

Thank you for buying an ASUS® P8H77-M PRO motherboard!

The motherboard delivers a host of new features and supports the latest technologies, making it another standout in the long line of ASUS quality motherboards!

Before you install the motherboard, check the items in your package with the list below.

1.2 Package contents

Check your motherboard package for the following items.

Chapter 1

ASUS P8H77-M PRO

motherboard

2 x Serial ATA 6.0 Gb/s cables 2 x Serial ATA 3.0 Gb/s cables 1 x ASUS Q-Shield

1 x 2-in-1 ASUS Q-Connector kit

• If any of the above items is damaged or missing, contact your retailer.

• The illustrations above are for reference only. Actual product specications may vary.

User manual Support DVD

ASUS P8H77-M PRO

1-1

1.3 Special features

1.3.1 Product highlights

Chapter 1

LGA1155 socket for Intel® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® Processors

This motherboard supports Intel® 3rd/2nd generation Core™ i7 / i5 / i3 / Pentium® / Celeron® processors in the LGA1155 package, with iGPU, memory and PCI Express controllers integrated to support onboard graphics output with dedicated chipsets, 2-channel (4 DIMMs) DDR3 memory and 16 PCI Express 3.0/2.0 lanes. This provides great graphics performance. Intel® 3rd / 2nd generation Core™ i7 / i5 / i3 / Pentium® / Celeron® processors are among the

most powerful and energy efcient CPUs in the world.

Intel® H77 Express Chipset

The Intel® H77 Express Chipset is a single-chipset designed to support the 1155 socket Intel® 3rd / 2nd generation Core™ i7 / i5 / i3 / Pentium® / Celeron® processors. It provides improved

performance by utilizing serial point-to-point links, allowing increased bandwidth and stability.

Additionally, H77 chipset provides 4 USB 3.0 ports for 10 times faster data retrieval speed. Moreover, Intel® H77 Express Chipset can also enable iGPU function, letting users enjoy the latest Intel® integrated graphic performance.

Dual-Channel DDR3 2200(O.C.)* / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1600 / 1333 / 1066 MHz Support

The motherboard supports DDR3 memory that features data transfer rates of DDR3 2200(O.

C.)* / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1600 / 1333 / 1066 MHz to meet the higher

bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications. The dual-channel DDR3 architecture enlarges the bandwidth of your system memory to boost system performance.

* Due to the CPU behavior, DDR3 2133/1866MHz memory module will run at DDR3 2000/1800MHz frequency as default.

**DDR3 1600 MHz and higher memory frequency is supported by Intel® 3rd generation processors.

PCI Express® 3.0

PCI Express® 3.0 (PCIe 3.0) is the latest PCI Express bus standard with improved encoding schemes that provide twice the performance of the current PCIe 2.0. The total bandwidth for a x16 link reaches a maximum of 32Gb/s, double the 16 Gb/s of PCIe 2.0 (in x16 mode). As such, PCIe 3.0 provides users unprecendented data speeds, combined with the convenience and seamless transition offerred by complete backward compatibility with PCIe 1.0 and PCIe

2.0 devices. PCIe 3.0 will become a must-have feature for users who wish to improve and

optimize graphic performance, as well as have the latest technology available to them.

* PCI 3.0 speed is supported by Intel® 3rd generation CoreTM processors.

1-2

Chapter 1: Product Introduction

S/PDIF out connector at the rear I/O

This motherboard provides convenient connectivity to external home theater audio systems via the optical S/PDIF (SONY-PHILIPS Digital Interface) out connector at the rear I/O. The S/PDIF transfers digital audio without converting it to analog format, maintaining the best signal quality possible.

Gigabit LAN solution

The onboard LAN controller is an integrated Gb LAN controller. It’s enhanced with an ACPI

management function to provide efcient power management for advanced operating

systems.

8-channel high denition audio

The onboard 8-channel HD audio (High Denition Audio, previously codenamed Azalia) CODEC enables high-quality 192KHz/24-bit audio output and jack-detect feature that automatically detects and identies what types of peripherals are plugged into the audio I/O jacks. Users are notied when audio devices are plugged in to the incorrect Line-in, Line-out,

and Mic port.

100% All High-quality Conductive Polymer Capacitors

This motherboard uses all high-quality conductive polymer capacitors for durability, improved lifespan, and enhanced thermal capacity.

Complete USB 3.0 Integration

ASUS facilitates the strategic USB 3.0 accessibility for both the front and rear panel – 4 USB 3.0 ports in total. Experience the latest plug & play connectivity at speeds up to 10 times faster than USB 2.0. The P8H77-M PRO affords greater convenience to high speed connectivity.

1.3.2 DIGI+ VRM Digital Power Design

All-new digital CPU power controls work perfectly together to match digital power signal

(SVID) requests from the CPU, with ultra-fast sensing and response efciently delivering

precision power. Accurate delivery reduces waste, and provides more stable CPU Vcore voltages. Users can adjust CPU PWM voltages and frequencies for various overclocking scenarios, with accurate input through UEFI BIOS tuning or the exclusive ASUS interface. This proprietary design increases overclocking headroom to push performance to its full potential.

Chapter 1

ASUS EPU

Energy Efciency All Around

Tap into the world’s rst real-time PC power saving chip through a simple onboard switch or AI Suite II utility. Get total system-wide energy optimization by automatically detecting current

PC loadings and intelligently moderating power consumption. This also reduces fan noise and extends component longevity.

ASUS P8H77-M PRO

1-3

1.3.3 ASUS Exclusive Features

USB 3.0 Boost

Chapter 1

Faster USB 3.0 Transmission with UASP

New ASUS USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol), the latest USB 3.0 standard. With USB 3.0 Boost technology, a USB device’s transmission speed

is signicantly increased up to 170%, adding to an already impressive USB 3.0 transfer

speed. ASUS software automatically accelerates data speeds for compatible USB 3.0 peripherals without the need for any user interaction.

Network iControl

Real-time Network Bandwidth Control

With a single-click on/off button, the application currently in use has its data and network

bandwidth prioritized over other programs. Moreover, you can prioritize your favorite software easily by conguring proles through the intuitive user interface. Within the prole, programs can be pre-scheduled to run in a specic time period to avoid network congestion and

long-waits on downloads. Auto PPPoE network connection provides a one-step setup for enhanced online convenience. Overall, it’s an intuitive network bandwidth control center.

GPU Boost

Go to the Limit with iGPU Level Up!

GPU Boost accelerates the integrated GPU for extreme graphics performance. The user-

friendly interface facilitates exible frequency adjustments. It easily delivers stable system-

level upgrades for every use.

MemOK!

Any Memory is A-OK!

MemOK! quickly ensures memory boot compatibility. This remarkable memory rescue tool requires a mere push of a button to patch memory issues. MemOK! determines fail-safe settings and dramatically improves your system boot success. Get your system up and running in no time!

AI Suite II

One-stop Access to Innovative ASUS Features

With its user-friendly interface, ASUS AI Suite II consolidates all the exclusive ASUS features into one simple to use software package. It allows you to supervise overclocking, energy management, fan speed control, and voltage and sensor readings. This all-in-one software offers diverse and ease of use functions, without having to switch back and forth between different utilities.

ASUS TurboV

Easy, Real-Time O.C. Tunings

Feel the adrenaline rush of real-time OC-now a reality with the ASUS TurboV. This easy OC

tool allows you to overclock without exiting or rebooting the OS; and its user-friendly interface makes overclocking a few clicks away. Moreover, the ASUS OC proles in TurboV provides

the best O.C. settings in different scenarios.

1-4

Chapter 1: Product Introduction

1.3.4 ASUS Quiet Thermal Solution

Fanless Design: stylish heatsink solution

The Wing Heatsink features a 0-dB thermal solution that offers users a noiseless PC

environment. The beautifully curved ns provide a visual design air, while also effectively cooling down hot airows generated by the PCH chipset. Combined with usability and

aesthetics, the ASUS Wing Heatsink will give users an extremely silent and cooling experience with an elegant appearance!.

ASUS Fan Xpert

ASUS Fan Xpert intelligently allows you to adjust the CPU and chassis fan speeds according to different ambient temperatures caused by different climate conditions in different

geographic regions and your PC’s loading. The built-in variety of useful proles offer exible

controls of fan speed to achieve a quiet and cool environment.

1.3.5 ASUS EZ DIY

ASUS UEFI BIOS (EZ Mode)

Flexible and Easy BIOS Interface

ASUS UEFI BIOS offers the rst mouse-controlled graphical BIOS designed with selectable

modes, providing a user-friendly interface that goes beyond the traditional keyboard-only

controls. It also fully-utilizes 2.2TB and larger hard drives with native 64-bit operating systems

support.

ASUS exclusive interface

EZ Mode displays frequently-accessed info. Users can choose system performance settings, and drag and drop boot priorities. Advanced Mode for performance enthusiasts includes detailed DRAM settings via a dedicated memory info page for complete insight.

New upgrade! Quick and easy information for enhanced system control

- F12 BIOS snapshot hotkey for sharing UEFI information and troubleshooting

- New F3 Shortcut for frequently accessed information

- ASUS DRAM SPD (Serial Presence Detect) information for accessing memory

information, detecting faulty DIMMs, and helping with difcult POST situations.

ASUS Q-Design

ASUS Q-Design enhances your DIY experience. All of Q-Slot, and Q-DIMM design speed up and simplify the DIY process!

Chapter 1

ASUS Q-Shield

The specially designed ASUS Q-Shield does without the usual "ngers" - making it

convenient and easy to install. With better electric conductivity, it ideally protects your motherboard against static electricity and shields it against Electronic Magnetic Interference (EMI).

ASUS P8H77-M PRO

1-5

ASUS Q-Connector

The ASUS Q-Connector allows you to connect or disconnect the chassis front panel cables

Chapter 1

in one easy step with one complete module. This unique adapter eliminates the trouble of plugging in one cable at a time, making the connection quick and accurate.

ASUS EZ-Flash 2

Simply update the BIOS from a USB ash disk before entering the OS

EZ Flash 2 is a user-friendly BIOS update utility. Simply launch this tool and update the BIOS

from a USB ash disk before entering the OS. You can update your BIOS in a few clicks without preparing an additional oppy diskette or using an OS-based ash utility.

1.3.6 Other special features

LucidLogix® Virtu MVP™

LucidLogix® Virtu MVP featuring HyperFormance™ Technology boosts your discrete graphics card up to 60% beyond its original performance. Designed for Intel and Windows® 7 PCs, it perfectly combines the performance of discrete graphics cards with fast computing iGPU. Also with the newly designed Virtual Sync, users can enjoy a smoother gaming experience by eliminating tearing artifacts. LucidLogix also dynamically assign tasks to the best available graphics resource, based on power,

performance and system load. This allows users to fully utilize 3x faster video conversion

with Intel® Quick Sync Video technology while retaining high-end 3D rendering and gaming performance, provided by both NVIDIA® and AMD graphic cards. When the discrete graphics

card is not required, power consumption goes automatically down to near zero, making the

system more environmentally-friendly. For users searching for perfection, LucidLogix Virtu

MVP provides great graphical performance and the best exibility and efciency.

*LucidLogix® Virtu Universal MVP™ supports Windows® 7 operating system.

**Intel® Quick Sync Video feature is supported by 3rd/2nd generation Intel® Core™ processor family.

processor graphics

Virtu MVP could

DisplayPort 1.1a Support

DisplayPort is a digital display interface standard that delivers up to 10.8 Gbps of bandwidth over standard cables, providing billions of colors and bi-directional communications, thus enabling the fastest refresh rates and the highest resolution digital display through a single cable. It also supports HDCP copy protection for Blu-ray Discs. Simply output 3D signals through the connected DisplayPort 1.1a cable with your 3D display, then sit back and enjoy a perfect 3D animation experience.

1-6

Chapter 1: Product Introduction

HDMI Support

Enjoy Full HD 1080p Multimedia Home-Theater Entertainment

High Denition Multimedia Surface (HDMI) is a set of digital video standards that delivers

mulit-channel audio and uncompressed digital video for full HD 1080p visuals through a single cable. Supporting HDCP copy protection such as HD DVD and blu-ray discs, HDMI provides you with the highest quality home theater experience.

ErP Ready

The motherboard is European Union’s Energy-related Products (ErP) ready, and ErP requires

products to meet certain energy efciency requirement in terms of energy consumption. This is in line with the ASUS vision of creating environment-friendly and energy-efcient

products through product design and innovation to reduce carbon footprint and thus mitigate environmental impacts.

Chapter 1

ASUS P8H77-M PRO

1-7

Chapter 1

1-8

Chapter 1: Product Introduction

Chapter 2

Chapter 2: Hardware information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is disconnected from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

ASUS P8H77-M PRO

2-1

2.2 Motherboard overview

P8H77-M PRO

PCIEX16_1

PCIEX1_1

PCIEX1_2

AAFP

EATXPWR

CPU_FAN

CHA_FAN2

CHA_FAN1

PWR_FAN

Lithium Cell

CMOS Power

Super

I/O

ALC 892

ASM 1442

8Mb BIOS

SB_PWR

CLRTC

PANEL

GPU_Boost

GPU_LED

24.4cm(9.6in)

Intel

H77

Marvell

9172

DDR3 DIMM_B1 (64bit, 240-pin module)

DDR3 DIMM_B2 (64bit, 240-pin module)

DDR3 DIMM_A1 (64bit, 240-pin module)

DDR3 DIMM_A2 (64bit, 240-pin module)

SATA6G_1

SATA6G_2

SATA3G_1

SATA3G_2

SATA3G_3

SATA3G_4

SATA6G_E1

SPDIF_OUT

LPT

DRAM_LED

MemOK!

LGA1155

EATX12V

USB3_34

USB56USB78USB910

COM1

RTL

8111F

EPU

EPU_LED

ESATA 6G _USB3_12

LAN1_USB12

AUDIO

KB_USB3_34

SPDIF_O

_HDMI

_DP

DVI_VGA

DIGI

+EPU

1 12 53 6

1618 1719202122

TB_Header

2.2.1 Motherboard layout

Chapter 2

2-2

Refer to

2.2.8 Internal connectors

information about rear panel connectors and internal connectors.

and

2.3.10 Rear panel connection

for more

Chapter 2: Hardware information

Layout contents

Connectors/Jumpers/Slots Page

1. CPU,Chassis, and Power fan connectors (4-pin CPU_FAN, 4-pin

10.

11.

12.

13.

14.

15.

16.

17.

18.

19. Serial port connectors (10-1 pin COM1) 2-25

20. LPT connector (26-1 pin LPT ) 2-24

21. Front panel audio connector (10-1 pin AAFP) 2-23

22. Digital audio connector (4-1 pin SPDIF_OUT)

CHA_FAN, 3-pin PWR_FAN)

EATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-25

GPU Boost switch 2-16

GPU Boost LED 2-18

Intel® CPU socket 2-4

DDR3 DIMM sockets 2-5

MemOK! switch 2-15

DRAM LED 2-17

USB 3.0 connector (20-1 pin USB3_34) 2-22

Marvell® Serial ATA 6.0 Gb/s connectors (7-pin SATA 6G_E1 [navy blue])

EPU switch 2-16

Intel® H77 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2 [gray])

Intel® H77 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1-4, [Blue])

EPU LED 2-17

Onboard LED (SB_PWR) 2-17

System panel connector (20-8 pin F_PANEL) 2-26

Clear RTC RAM (3-pin CLRTC) 2-14

USB connectors (10-1 pin USB56, USB78, USB910) 2-22

2-24

2-21

2-19

Chapter 2

2-20

2-23

ASUS P8H77-M PRO

2-3

2.2.2 Central Processing Unit (CPU)

P8H77-M PRO

P8H77-M PRO CPU socket LGA1155

The motherboard comes with a surface mount LGA1155 socket designed for the Intel® 3rd/2nd Generation Core™ i7 / i5 / i3 / Celeron® / Pentium® Processors.

Chapter 2

Ensure that all power cables are unplugged before installing the CPU.

• The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a LGA1156 CPU on the LGA1155 socket.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

• Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA1155 socket.

• The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

2-4

Chapter 2: Hardware information

2.2.3 System memory

P8H77-M PRO

P8H77-M PRO 240-pin DDR3 DIMM sockets

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots.

A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot.

Recommended memory congurations

We recommend that you install the memory modules from the blue slots for better overclocking capability.

Chapter 2

ASUS P8H77-M PRO

2-5

Memory congurations

You may install 1GB, 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM sockets.

Chapter 2

• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.

• According to Intel CPU specications, DIMM voltage below 1.65V is recommended to

protect the CPU.

• Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.

• Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS is about 3GB or less. For effective use of memory, we recommend that you do any of the following:

- Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.

- Install a 64-bit Windows OS when you want to install 4GB or more on the

motherboard. For more details, refer to the Microsoft® support site at http://support.microsoft.com/kb/929605/en-us.

• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).

• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked frequency or at a higher frequency, refer to section

3.4 Ai Tweaker menu

for manual

memory frequency adjustment.

• For system stability, use a more efcient memory cooling system to support a full

memory load (4 DIMMs) or overclocking condition.

Visit the ASUS website www.asus.com for latest QVL.

P8H77-M PRO Motherboard Qualied Vendors Lists (QVL) DDR3 2400 MHz capability

Vendors Part No. Size SS/DSChip

CORSAIR CMGTX8(XMP) 8GB (2GBx4) SS - - 10-12-10-27 1.65V • • • G.SKILL F3-19200CL11Q-16GBZHD(XMP) 16GB

G.SKILL F3-19200CL9D-4GBPIS(XMP) 4GB (2x2GB) DS - - 9-11-9-28 1.65V • • • GEIL GET34GB2400C9DC(XMP) 2GB DS - - 9-11-9-27 1.65V • • • KINGMAX FLLE88F-C8KKAA HAIS(XMP) 2GB SS - - 10-11-10-30 1.8V • • • Transcend TX2400KLU-4GK(427652)(XMP) 4GB (2x2GB) SS - - - 1.65V • • • Transcend TX2400KLU-4GK (381850)(XMP) 4GB (2x2GB) SS - - 9 1.65V • • • Transcend TX2400KLU-4GK(374243)(XMP) 4GB (2x2GB) DS - - 9 1.65V • • • PATRIOT PVV34G2400C9K(XMP) 4GB (2x2GB) DS - - 9-11-9-27 1.65V • •

DS - - 11-11-11-31 1.65V • •

(4x4GB)

2-6

Chip NO. Timing Voltage DIMM socket support

Brand

Chapter 2: Hardware information

(Optional) 1 DIMM 2 DIMMs 4 DIMMs

P8H77-M PRO Motherboard Qualied Vendors Lists (QVL) DDR3 2250 MHz capability

Vendors Part No. Size SS/DSChip

KINGMAX KHX2250C9D3T1K2/4GX(XMP) 4GB (2x2GB) DS - - - 1.65V • • •

Chip NO. Timing Voltage DIMM socket support

Brand

(Optional) 1 DIMM 2 DIMMs 4 DIMMs

P8H77-M PRO Motherboard Qualied Vendors Lists (QVL) DDR3 2200 MHz capability

Vendors Part No. Size SS/DSChip

G.SKILL F3-17600CL8D-4GBPS(XMP) 4GB

GEIL GET34GB2200C9DC(XMP) 2GB DS - - 9-10-9-28 1.65V • • • GEIL GET38GB2200C9ADC(XMP) 4GB DS - - 9-11-9-28 1.65V • KINGMAX FLKE85F-B8KJAA-FEIS(XMP) 2GB DS - - - - • • • KINGMAX FLKE85F-B8KHA EEIH(XMP) 4GB

KINGMAX FLKE85F-B8KJA FEIH(XMP) 4GB (2x2GB) DS - - - 1.5V-1.7V • • •

(2X2GB)

DS - - 8-8-8-24 1.65V

DS - - - 1.5V-1.7V •

Chip NO. Timing Voltage DIMM socket support

Brand

(Optional) 1 DIMM 2 DIMMs 4 DIMMs

P8H77-M PRO Motherboard Qualied Vendors Lists (QVL) DDR3 2133 MHz capability

Vendors Part No. Size SS/DSChip

A-DATA AX3U2133GC2G9B-DG2(XMP) 2GB SS - - 9-11-9-27 1.55-1.75V • • • CORSAIR CMT16GX3M4X2133C9(XMP

1.3) CORSAIR CMT4GX3M2A2133C9(XMP) 4GB (2x2GB) DS - - 9-10-9-24 1.65V • • • CORSAIR CMT4GX3M2B2133C9(XMP) 4GB (2GBx2) DS - - 9-10-9-27 1.5V • • • G.SKILL F3-17000CL9Q-16GBZH(XMP) 16GB

GEIL GE34GB2133C9DC(XMP) 2GB DS - - 9-9-9-28 1.65V • • GEIL GU34GB2133C9DC(XMP) 4GB (2x2GB) DS - - 9-9-9-28 1.65V • • • KINGSTON KHX2133C9AD3T1K2/

4GX(XMP)

KINGSTON KHX2133C9AD3X2K2/

4GX(XMP)

KINGSTON KHX2133C9AD3T1K4/

8GX(XMP)

KINGSTON KHX2133C9AD3T1FK4/

8GX(XMP)

16GB (4x4GB)

(4GBx4)

4GB (2x2GB) DS - - - 1.65V • • •

4GB (2x2GB) DS - - 9-11-9-27 1.65V • • •

8GB (4x2GB) DS - - 9-11-9-27 1.65V • • •

8GB (4x2GB) DS - - - 1.65V • • •

DS - - 9-11-10-27 1.50V • • •

DS - - 9-11-10-28 1.65V • • •

Chip NO. Timing Voltage DIMM socket support

Brand

(Optional) 1 DIMM 2 DIMMs 4 DIMMs

Chapter 2

ASUS P8H77-M PRO

2-7

P8H77-M PRO Motherboard Qualied Vendors Lists (QVL) DDR3 2000 MHz capability

Vendors Part No. Size SS/DSChip

Apacer 78.AAGD5.9KD(XMP) 6GB (3x2GB) DS - - 9-9-9-27 1.65V • • •

CORSAIR CMZ4GX3M2A2000C10(XMP) 4GB (2x2GB) SS - - 10-10-10-27 1.50V • • •

CORSAIR CMT6GX3M3A2000C8(XMP) 6GB (3x2GB) DS - - 8-9-8-24 1.65V • • •

G.SKILL

G.SKILL F3-16000CL9D-4GBTD(XMP) 4GB (2GBx2) DS - - 9-9-9-27 1.65V • • •

G.SKILL F3-16000CL6T-6GBPIS(XMP) 6GB (2x4GB) DS - - 6-9-6-24 1.65V • • •

GEIL GUP34GB2000C9DC(XMP) 4GB (2x2GB) DS - - 9-9-9-28 1.65V • • •

KINGSTON KHX2000C9AD3T1K2/

KINGSTON KHX2000C9AD3W1K2/

KINGSTON

KINGSTON KHX2000C9AD3W1K3/

Chapter 2

KINGSTON KHX2000C9AD3T1K3/

Transcend TX2000KLN-8GK(XMP) 8GB (2x4GB) DS - - - 1.6V • • •

Asint SLA302G08-ML2HB(XMP) 4GB DS HYNIX H5TQ2G83BFR

PATRIOT PVT36G2000LLK 6GB (3x2GB) DS - - 8-8-8-24 1.65V • • •

P8H77-M PRO Motherboard Qualied Vendors Lists (QVL) DDR3 1866 MHz capability

Vendors Part No. Size SS/DSChip

A-DATA AX3U1866PB2G8-DP2(XMP) 2GB DS - - 8-8-8-24 1.55V-1.75V

CORSAIR CMT4GX3M2A1866C9(XMP) 4GB (2x2GB) DS - - 9-9-9-24 1.65V • • •

CORSAIR CMT6GX3MA1866C9(XMP) 6GB (3x2GB) DS - - 9-9-9-24 1.65V • • •

CORSAIR CMZ8GX3M2A1866C9(XMP) 8GB (2x4GB) DS - - 9-10-9-27 1.50V • • •

G.SKILL F3-14900CL9Q-16GBZL(XMP) 16GB

G.SKILL F3-14900CL10Q2-

G.SKILL F3-14900CL9D-8GBXL(XMP) 8GB (2x4GB) DS - - 9-10-9-28 1.6V • • •

G.SKILL F3-14900CL9Q-8GBXL(XMP) 8GB (2GBx4) DS - - 9-9-9-24 1.65V • • •

KINGSTON KHX1866C9D3T1K3/3GX(XMP) 3GB (3x1GB) SS - - - 1.65V • • •

KINGSTON KHX1866C9D3K4/16GX(XMP) 16GB

KINGSTON KHX1866C9D3T1K3/6GX(XMP) 6GB (3x2GB) DS - - - 1.65V • • •

KINGSTON KHX1866C11D3P1K2/8G 8GB (4GBx2) DS - - - 1.5V • • •

F3-16000CL9D-4GBFLS(XMP)

4GX(XMP)

KHX2000C9AD3T1K2/ 4GX(XMP)

6GX(XMP)

64GBZLD(XMP)

Chip NO. Timing Voltage DIMM socket support

Brand

1.65V •

4GB (2GBx2) DS

4GB (2x2GB) DS - - - 1.65V • • •

4GB (2x2GB) DS - - - 1.65V • •

4GB (2x2GB) DS

6GB (3x2GB) DS - - - 1.65V • •

(4GBx4)

64GB (8GBx8)

(4GBx4)

- -

H9C

Chip NO. Timing Voltage DIMM socket support

Brand

DS - - 9-10-9-28 1.5V • • •

DS - - 10-11-10-30 1.5V • • •

DS - - - 1.65V • • •

9-9-9-24

1.65V •

- - • • •

(Optional)

1 DIMM 2 DIMMs 4 DIMMs

• •

(Optional)

1 DIMM 2 DIMMs 4 DIMMs

2-8

Chapter 2: Hardware information

+ 126 hidden pages