ASUS RS500A-E6-PS4, E7600 User Manual

RS500A-E6/PS4
Conguration Guide
E7600
First Edition V1
August 2012
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
limited to the implied warranties or conditions of merchantability or tness for a particular purpose. In no event shall ASUS, its directors, ofcers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of use or data,
interruption of business and the like), even if ASUS has been advised of the possibility of such damages arising from any defect or error in this manual or product.
Specications and information contained in this manual ae furnished for informational use only, and are
subject to change at any time without notice, and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
II
Contents
Revision history .......................................................................................... III
Safety information ...................................................................................... IV
Chapter 1: Product introduction
1.1 Key features .................................................................................. 1-2
1.2 System overview .......................................................................... 1-3
1.3 Front panel features ..................................................................... 1-4
1.4 Rear panel features ...................................................................... 1-4
1.5 Systemspecications ................................................................. 1-5
Chapter 2: Components
2.1 Upgrading CPU and CPU heatsink ............................................. 2-2
2.2 Upgrading system memory ......................................................... 2-3
2.3 Upgrading hard disk drives ......................................................... 2-5
2.4 Installing ASUS PIKE RAID module............................................ 2-6
2.5 Installing an expansion card to the riser card bracket ............. 2-7
2.6 Installing optical drive ................................................................. 2-8
2.7 Installing ASUS Server Management Board .............................. 2-9
2.8 Friction rail kit ............................................................................ 2-10
2.9 OS support list ........................................................................... 2-11

Revision history

Revision Revision history Date
V1 First release of RS500A-E6/PS4 conguration guide July 2012
III

Safety information

Electrical Safety
Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged.
To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
When adding or removing any additional devices to or from the system, contact
a qualied service technician or your dealer. Ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you service.
If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your dealer.
Operation Safety
Servicing of this product or units is to be performed by trained service personnel only.
Before operating the server, carefully read all the manuals included with the server package.
Before using the server, ensure all cables are correctly connected and the power cables are not damaged. If any damage is detected, contact your dealer as soon as possible.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Place the server on a stable surface.
This product is equipped with a three-wire power cable and plug for the user’s safety. Use the power cable with a properly grounded electrical outlet to avoid electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
Heavy System
CAUTION! This server system is heavy. Ask for assistance when moving or carrying the system.
IV
Chapter 1
This chapter describes the key features of RS500A-E6/PS4. It includes the product overview and general
specications.
Product introduction
1-

1.1 Key features

Mainstream High Computing Node with AMD G34 Solution
Outstanding Performance with Latest Technologies
The RS500A-E6/PS4 delivers outstanding performance with up-to-date AMD
Opteron 6200 series processors, with triple HT3 links between CPUs to provide up to 25.6GB/s bandwidth, achieving extremely fast transfer rate.
High Scalability
With 16 DIMM slots inside, the RS500A-E6/PS4 provides maximum memory
capacity up to 256GB. Meanwhile, with PIKE add-on cards, the server will offer scalable and exible storage options in system.
Super Reliability with PIKE Upgrade Kit
RS500A-E6/PS4 has four 3.5” hot-swap HDD bays to support SATA or SAS HDDs
up to 4TB, meeting the demand of mass storage, and offers users a complete RAID solution (together with PIKE) for data protection.
The ASUS optional upgrade kit PIKE SAS2 6G will provide cost-effective storage interface upgrade solution and exible choices for multiple storage option.
Green Design
Energy-savingwith80+(Gold)PowerEfciency
With 80+ PFC high efciency power supply, RS500A-E6/PS4 is able to reduce the
power loss and save power bill for users.
Real-time and Out-of-band Server Management
The optional ASMB4-iKVM module offers real-time web-based management and remote system control (KVM-over-IP) to the system from any local computer anywhere, anytime.
On-board USB for Easy Virtualization Deployment
The RS500A-E6/PS4 provides excellent virtualization applications with VMWare
supported. The onboard vertical USB connector is designed for integrated hyperviser for easy deployment, allowing the full use of system resources and reducing TCO and IT expenses.
Chapter 1: Product introduction1-2

1.2 System overview

6
8
9
9
7
4
5
3
2
1
10
11
Items Items
1. Central processing unit (CPU) 7. Riser card bracketRiser card bracket
2. CPU heatsink 8. System fansSystem fans
3. System memory 9. Friction rackmount rail kitFriction rackmount rail kit
4. HDD traysHDD trays 10. ASUS Server management board (optional)
5. Hard disk driveHard disk drive 11. FAN Duct
6. ASUS PIKE SAS RAID card (optional)ASUS PIKE SAS RAID card (optional)
ASUS RS500A-E6/PS4 1-3
Loading...
+ 15 hidden pages