ASUS E7535 User Manual

F2A85-V

Motherboard

E7535

First Edition
October 2012

Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either

(1) for free by downloading it from http://support.asus.com/download
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location

where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source

Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notication to the email address [e-mail], stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).

ii

Contents

Safety information ...................................................................................................... vi

About this guide ........................................................................................................ vii

F2A85-V specications summary ............................................................................. ix

Package contents ...................................................................................................... xii

Chapter 1: Product introduction

1.1 Special features ............................................................................................ 1-1

1.1.1 Product highlights ...........................................................................1-1

1.1.2 ASUS DIGI+ VRM ........................................................................... 1-2

1.1.3 ASUS Exclusive Features ............................................................... 1-2

1.2 Before you proceed ...................................................................................... 1-4

1.3 Motherboard overview .................................................................................1-5

1.3.1 Placement direction ........................................................................1-5

1.3.2 Screw holes ....................................................................................1-5

1.3.3 Motherboard layout .........................................................................1-6

1.3.4 Layout contents ...............................................................................1-7

1.4 Central Processing Unit (CPU) .................................................................... 1-7

1.4.1 CPU installation ..............................................................................1-8

1.4.2 CPU heatsink and fan assembly installation ................................... 1-9

1.5 System memory .......................................................................................... 1-11

1.5.1 Overview ....................................................................................... 1-11

1.5.2 Memory congurations ..................................................................1-12

1.5.3 Installing a DIMM ..........................................................................1-19

1.6 Expansion slots .......................................................................................... 1-20

1.6.1 Installing an expansion card .........................................................1-20

1.6.2 Conguring an expansion card ..................................................... 1-20

1.6.3 PCI slots ........................................................................................1-20

1.6.4 PCI Express x1 slots ..................................................................... 1-20

1.6.5 PCI Express x16 slots ................................................................... 1-20

1.7 Jumpers.......................................................................................................1-22

1.8 Connectors ..................................................................................................1-23

1.8.1 Rear panel ports ...........................................................................1-23

1.8.2 Internal connectors .......................................................................1-25

1.9 Onboard switches ......................................................................................1-31

1.10 Onboard LEDs ............................................................................................1-33

1.11 Software support ........................................................................................ 1-34

1.11.1 Installing an operating system ......................................................1-34

1.11.2 Support DVD information ..............................................................1-34

iii

Chapter 2: BIOS information

2.1 Managing and updating your BIOS .............................................................2-1

2.1.1 ASUS Update utility ........................................................................2-1

2.1.2 ASUS EZ Flash 2 ............................................................................ 2-2

2.1.3 ASUS CrashFree BIOS 3 utility ......................................................2-3

2.1.4 ASUS BIOS Updater ....................................................................... 2-4

2.2 BIOS setup program .....................................................................................2-6

2.3 Main menu ................................................................................................... 2-10

2.3.1 System Language [English] .......................................................... 2-10

2.3.2 System Date [Day xx/xx/xxxx] .......................................................2-10

2.3.3 System Time [xx:xx:xx] .................................................................2-10

2.3.4 Security .........................................................................................2-10

2.4 Ai Tweaker menu ........................................................................................ 2-12

2.4.1 Ai Overclock Tuner [Auto] .............................................................2-13

2.4.2 Memory Frequency [Auto] .............................................................2-13

2.4.3 APU Multiplier [Auto] ..................................................................... 2-13

2.4.4 NB Frequency [Auto] .....................................................................2-13

2.4.5 EPU Power Saving Mode [Disabled] ............................................2-13

2.4.6 GPU Boost [Auto] ..........................................................................2-14

2.4.7 OC Tuner ......................................................................................2-14

2.4.8 DRAM Timing Control ...................................................................2-14

2.4.9 CPU Voltage [Offset Mode] ...........................................................2-14

2.4.10 DRAM Voltage [Auto] .................................................................... 2-15

2.4.11 SB 1.1V Voltage [Auto] ................................................................. 2-15

2.4.12 1.1VSB Voltage [Auto] .................................................................. 2-15

2.4.13 APU1.2V Voltage [Auto] ................................................................2-15

2.4.14 VDDA Voltage [Auto] ..................................................................... 2-15

2.4.15 DIGI+ VRM ....................................................................................2-15

2.5 Advanced menu .......................................................................................... 2-17

2.5.1 CPU Conguration ........................................................................2-17

2.5.2 SATA Conguration ....................................................................... 2-18

2.5.3 USB Conguration ........................................................................ 2-19

2.5.4 NB Conguration ...........................................................................2-19

2.5.5 Onboard Devices Conguration .................................................... 2-20

2.5.6 APM ..............................................................................................2-20

2.5.7 Network Stack ............................................................................... 2-21

2.6 Monitor menu .............................................................................................. 2-22

2.6.1 CPU Temperature / MB Temperature [xxxºC/xxxºF]...................... 2-23

2.6.2 CPU_FAN / CHA_FAN1/2 Speed [xxxx RPM] or [Ignore] / [N/A] .. 2-23

iv

2.6.3 CPU_FAN Q-Fan Control [Enabled] ............................................. 2-23

2.6.4 CHA_FAN1/2 Q-Fan Control [Enabled] ........................................ 2-24

2.6.5 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage ..................2-24

2.6.6 Anti Surge Support [Enabled] .......................................................2-24

2.7 Boot menu ................................................................................................... 2-25

2.7.1 Fast Boot [Enabled] ......................................................................2-26

2.7.2 Full Screen Logo [Enabled] ...........................................................2-26

2.7.3 Post Delay Time [3 sec] ................................................................2-27

2.7.4 Bootup NumLock State [On] ......................................................... 2-27

2.7.5 Wait for ‘F1’ If Error [Enabled] .......................................................2-27

2.7.6 Option ROM Messages [Force BIOS] ........................................... 2-27

2.7.7 Setup Mode [EZ Mode] .................................................................2-27

2.7.8 CSM (Compatibility Support Module) ............................................2-27

2.7.9 Security Boot .................................................................................2-28

2.7.10 Boot Option Priorities ....................................................................2-29

2.7.11 Boot Override ................................................................................ 2-29

2.8 Tools menu .................................................................................................. 2-30

2.8.1 ASUS EZ Flash 2 Utility ................................................................2-30

2.8.2 ASUS SPD Information ................................................................. 2-30

2.8.3 ASUS O.C. Prole ......................................................................... 2-30

2.9 Exit menu ....................................................................................................2-31

Appendices

Notices ..................................................................................................................... A-1

ASUS contact information ...................................................................................... A-3

v

Safety information

Electrical safety

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

•
before relocating the system.

When adding or removing devices to or from the system, ensure that the power cables

•
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.

Before connecting or removing signal cables from the motherboard, ensure that all

•
power cables are unplugged.

Seek professional assistance before using an adapter or extension cord. These devices

•
could interrupt the grounding circuit.

Ensure that your power supply is set to the correct voltage in your area. If you are not

•
sure about the voltage of the electrical outlet you are using, contact your local power
company.

If the power supply is broken, do not try to x it by yourself. Contact a qualied service

•
technician or your retailer.

Operation safety

Before installing the motherboard and adding devices on it, carefully read all the manuals

•
that came with the package.

Before using the product, ensure all cables are correctly connected and the power

•
cables are not damaged. If you detect any damage, contact your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors,

•
slots, sockets and circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any area

•
where it may become wet.

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualied service

•
technician or your retailer.

vi

About this guide

This user guide contains the information you need when installing and conguring the

motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it
supports.

• Chapter 2: BIOS information

This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.

Where to nd more information

Refer to the following sources for additional information and for product and software
updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty yers,

that may have been added by your dealer. These documents are not part of the
standard package.

vii

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.

CAUTION: Information to prevent damage to the components when trying to
complete a task

IMPORTANT: Instructions that you MUST follow to complete a task. .

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italics

<Key> Keys enclosed in the less-than and greater-than sign

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key

Used to emphasize a word or a phrase.

means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or
Return key.

names are linked with a plus sign (+).

viii

F2A85-V specications summary

CPU AMD® socket FM2 for A-Series / Athlon™ Series processors

Supports CPU with up to 4 cores

AMD® Turbo Core Technology 3.0 support

* Refer to www.asus.com for the AMD® CPU support list

Chipset AMD® A85X FCH (Hudson D4)

Memory Dual-channel memory architecture

4 x 240-pin DIMM slots support maximum 64GB unbuffered non-ECC

DDR3 2400(O.C.)/2250(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866/

1600/1333/1066MHz memory modules

Support AMD® Memory Prole (AMP) memory modules

* The maximum 64GB memory capacity can be supported with 16GB or

above DIMMs. ASUS will update the memory QVL once the DIMMs are
available in the market.

** Refer to www.asus.com for the latest Memory QVL (Qualied Vendors

List).

*** When you install a total memory of 4GB capacity or more, Windows®

32-bit operating system may only recognize less than 3GB. We

recommend a maximum of 3GB system memory if you are using a
Windows® 32-bit operating system.

Graphics Integrated AMD® Radeon™ HD 7000 series graphics in A-Series APU

Multi-VGA output support: HDMI, DVI-D, D-Sub ports

- Supports HDMI with maximum resolution of 1920x1080@60GHz

- Supports Dual-link DVI with maximum resolution of 2560x1600@60GHz

- Supports D-Sub with maximum resolution of 1920x1600@60GHz

- Supports Microsoft® DirectX 11

- Maximum shared memory of 2GB

- Supports AMD® Dual Graphics technology

* Refer to http://www.amd.com/us/products/technologies/dual-graphics/

Pages/dual-graphics.aspx#3 for the discrete GPUs that support Dual
Graphics technology.

Expansion slots 2 x PCIe 2.0 x16 slots (blue @x16 mode, black @x4 mode)

2 x PCIe 2.0 x1 slots

3 x PCI slots

Multi-GPU
support

Storage / RAID AMD® A85X FCH:

LAN Qualcomm Atheros® 8161 PCIe Gigabit LAN controller

Audio Realtek® ALC887 8-channel High Denition Audio CODEC

Supports AMD® CrossFireX™ Technology (x16 & x4)

- 7 x Serial ATA 6.0Gb/s connectors support RAID 0, RAID 1, RAID 5,

RAID 10, and JBOD congurations

- 1 x eSerial ATA 6.0Gb/s at the back I/O

- Supports Jack-Detection, Multi-Streaming, and Front Panel Jack­Retasking

- Supports S/PDIF out interface at the back I/O

(continued on the next page)

ix

F2A85-V specications summary

USB AMD® A85X FCH:

- 10 x USB 2.0/1.1 ports (4 ports at the back panel [black], 6 ports at
the mid-board)

- 4 x USB 3.0/2.0 ports (2 ports at the back panel [blue], 2 ports at the
mid-board)

ASUS unique
features

ASUS exclusive
overclocking
features

ASUS Digital Power Design

- Industry leading digital 4+2 phase power design

- CPU Power utility

ASUS EPU

- EPU

ASUS Exclusive Features

- ASUS Network iControl*

- ASUS USB 3.0 Boost

- ASUS MemOK!

- ASUS AI Suite II

- ASUS AI Charger

- ASUS Remote GO!

- ASUS GPU Boost

- ASUS TurboV

- ASUS Disk Unlocker

- ASUS Anti-Surge Protection

- ASUS ESD

- 100% All high quality conductive polymer capacitors

ASUS Quiet Thermal Solution

- ASUS Fanless Design: Stylish heatsink & MOS heatsink solution

- ASUS Fan Xpert+

ASUS EZ DIY

- ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 2

- ASUS MyLogo 2™

* The ASUS Network iControl feature does not support Windows®

XP/Vista operating systems.

Precision Tweaker 2

- vCore: Adjustable CPU voltage at 0.00625V increment

- vDDNB: Adjustable CPU/NB voltage at 0.00625V increment

- vDRAM Bus: Adjustable DRAM voltage at 0.01V increment

- vFCH: Adjustable FCH voltage at 0.01V increment

SFS (Stepless Frequency Selection):

- APU frequency tuning from 90MHz up to 300MHz at 1MHz

increment

Overclocking Protection:

- ASUS C.P.R (CPU Parameter Recall)

(continued on the next page)

x

F2A85-V specications summary

Back Panel I/O ports 1 x PS/2 keyboard/mouse combo port

1 x HDMI port

1 x DVI port

1 x D-Sub port

1 x Optical S/PDIF output port

1 x eSATA port

1 x LAN (RJ-45) port

4 x USB 2.0/1.1 ports

2 x USB 3.0/2.0 ports (blue)

8-Channel audio I/O ports

Internal I/O connectors /
buttons / switches

BIOS 64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.0, WfM 2.0, SM

Support DVD Drivers

Form factor ATX form factor: 12.0 in x 9.1 in (30.5 cm x 23.1 cm)

3 x USB 2.0/1.1 connectors support additional 6 USB 2.0/1.1 ports

1 x USB 3.0/2.0 connector supports additional 2 USB 3.0/2.0 ports

(19-pin)

7 x SATA 6.0Gb/s connectors

1 x COM connector

1 x CPU fan connector (4-pin)

2 x Chassis fan connectors (4-pin)

1 x Front panel audio connector

1 x S/PDIF out connector

1 x System panel connector (20-8 pin)

1 x 24-pin EATX power connector

1 x 4-pin ATX 12V power connector

1 x MemOK! button

1 x GPU Boost switch

BIOS 2.7, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2,
ASUS CrashFreen BIOS 3, F12 Printscreen function, F3 Shortcut
function and ASUS DRAM SPD (Serial Presence Detect) memory
information

ASUS Update

ASUS utilities

Anti-Virus software (OEM version)

Specications are subject to change without notice.

xi

Package contents

F2A85-V

Atheros

8161

PCIEX16_1

PCIEX16_2

PCIEX1_2

PCIEX1_1

PCI1

PCI2

PCI3

USB56USB78USB910

PANEL

SPDIF_OUT

AAFP

CHA_FAN2

CPU_FAN

CHA_FAN1

Lithium Cell

CMOS Power

Super

I/O

AUDIO

Realtek
ALC887

COM

KBMS_USB34

64Mb
BIOS

SB_PWR

CLRTC

GPU_LED

DIGI
+VRM

ATX12V

GPU

AMD

®

A85X

DDR3 DIMM_A1 (64bit, 240-pin module)

DDR3 DIMM_A2 (64bit, 240-pin module)

DDR3 DIMM_B1 (64bit, 240-pin module)

DDR3 DIMM_B2 (64bit, 240-pin module)

LAN
_USB12

ESATA6G
_USB3
_12

SATA6G_4 SATA6G_5 SATA6G_6 SATA6G_7

SATA6G_1 SATA6G_2 SATA6G_3

SPDIFO
_HDMI

MemOK!

DRAM_LED

DVI_VGA

SOCKET FM2

EATXPWR

USB3_34

23.1cm(9.1in)

30.5cm(12.0in)

User Guide

Check your motherboard package for the following items.

xii

ASUS F2A85-V motherboard

1 x I/O Shield User Guide Support DVD

• If any of the above items is damaged or missing, contact your retailer.

• The illustrated items above are for reference only. Actual product specications may

vary with different models.

2 x Serial ATA 6.0 Gb/s

cables

Product introduction

1

1.1 Special features

1.1.1 Product highlights

AMD® A-series and Athlon™ Series processors

This motherboard supports AMD® A-series and Athlon™ Series processors. This
revolutionary APU (Accelerated Processing Unit) combines processing power and advanced

DirectX 11 graphics in one small, energy-efcient design to enable accelerated performance

and an industry-leading visual experience. It features Dual-channel DDR3 memory support
and accelerates data transfer rate up to 5GT/s.

AMD® A85X FCH (Hudson D4) chipset

AMD® A85X FCH (Hudson D4) is designed to support up to 5GT/s interface speed and AMD®
CrossFireX™ multi-GPU technology. It also supports 8 x SATA 6.0Gb/s ports and 4 x USB

3.0 ports.

Dual-Channel DDR3 2400(O.C.) / 2250(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.
C.) / 1866 / 1600 / 1333 / 1066 MHz Support

The motherboard supports the dual-channel DDR3 memory that features data transfer rates
of DDR3 2400(O.C.) / 2250(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866 / 1600 /

1333 / 1066 MHz to boost the system’s performance, and to meet the higher bandwidth

requirements of 3D graphics, multimedia, and Internet applications.

Complete USB 3.0 integration

This motherboard offers you the strategic USB 3.0 accessibility for both the front and rear
panels, allowing you to experience the convenience of the latest plug and play connectivity
solution at speed up to ten times faster than USB 2.0.

AMD® CrossFireX™ Technology

AMD’s CrossFireX™ boosts image quality along with rendering speed, eliminating the
need to scale down screen resolution to get high quality images. CrossFireX™ allows

higher antialiasing, anisotropic ltering, shading, and texture settings. Adjust your display
congurations, experiment with the advanced 3D settings, and check the effects with a real-

time 3D-rendered previews within AMD VISION Engine Control Center.

Native SATA 6.0 Gb/s support

With AMD® A85X FCH natively support for the next-generation Serial ATA (SATA) storage
interface, this motherboard delivers up to 6.0 Gb/s data transfer rates. It also provides
enhanced scalability, faster data retrieval, double the bandwidth of current bus systems.

100% All High-quality Conductive Polymer Capacitors

This motherboard uses all high-quality conductive polymer capacitors for durability, improved
lifespan, and enhanced thermal capacity.

ASUS F2A85-V

1-1

1.1.2 ASUS DIGI+ VRM

DIGI+POWER CONTROL: Digital Power Design for the APU*

ASUS motherboards using the AMD® A85X chipset employ precise digital voltage regulation
for the APU, called DIGI+ VRM (Voltage Regulation Modules) digital power design. The APU

voltage is adjusted via either carefully developed automated modes, or by using user-dened
proles. The effect is that DIGI+ VRM technology ensures greater energy efciency and the

most precise power delivery. Boosted by world-renowned ASUS quality, it creates an ideal

computing platform for a diverse range of applications, from gaming to multimedia or ofce

work and heavy multitasking. Engineered and tested to assure unmitigated performance,

ASUS A85X boards with DIGI+ VRM remain efcient and accurate, for reliable application in

every scenario.

* DIGI+ VRM functions also available in FM2 socket compatible CPUs

EPU

EPU (Energy Processing Unit), the world’s rst real-time system power-saving chip,

automatically detects the current system load and intelligently moderates power usage.

It offers a total system-wide energy optimization, reduces fan noise, and extends the

component’s lifespan.

1.1.3 ASUS Exclusive Features

USB 3.0 Boost

With USB 3.0 Boost technology, USB transfer speeds are signicantly increased up to

132%, enhancing an already impressive USB 3.0 transfer rate. ASUS software automatically
accelerates data speeds for compatible USB 3.0 peripherals without the need for any further
user interaction.

Remote GO!

Remote GO! links PCs, tablets, smartphones and TVs wirelessly together through an existing
LAN cable and router setup. It allows users to stream multimedia content from PC to DLNA
devices, access their computer anywhere using their mobile device at home, while also

allowing easy le transfers between your computer and mobile device. It provides seamless

environment for a futuristic connected lifestyle with three useful functions: DLNA Media Hub,
Remote Desktop and File Transfer.

DLNA Media Hub: Enjoy HD video, music and photos stored in the PC streaming to your
DLNA devices via Wi-Fi connectivity. You can even control the PC to play multimedia on a TV
with a tablet. It’s the perfect match for creating your own home theater!

Remote Desktop: Operate and control your PC in real-time from a smartphone or tablet
for complete comfort. This function brings notebook-like convenience, by creating a virtual
remote desktop, offering portable access to your data in desktop with a smartphone or tablet.

File Transfer: Send and share les between your PC and smart devices* with only a right

click on the mouse.

* iPad/iPhone can send, but not receive les from the PC.

1-2

Chapter 1: Product introduction

Network iControl

Network iControl is an intuitive one-step network control center that makes it easier for you to
manage your bandwidth and allows you to set, monitor, and schedule the bandwidth priorities
for your network programs. It allows you to automatically connect to a PPPoE network for a
more convenient online experience.

* The ASUS Network iControl feature does not support Windows® XP/Vista operating systems.

ASUS UEFI BIOS (EZ Mode)

ASUS UEFI BIOS, a UEFI compliant architecture, offers the rst mouse-controlled intuitive

graphical BIOS interface that goes beyond the traditional keyboard-only BIOS controls,

providing you with more exibility, convenience, and easy to navigate EFI BIOS than the

traditional BIOS versions. It offers you with dual selectable modes and native support for hard
drives larger than 2.2 TB.

ASUS UEFI BIOS includes the following new features:

• F12 BIOS snapshot hotkey

• F3 Shortcut for most accessed information

• ASUS DRAM SPD (Serial Presence Detect) information detecting faulty DIMMs, and

helping with difcult POST situations.

ASUS TurboV

With its user-friendly interface, ASUS TurboV offers you the adrenaline rush of real-time
overclocking without exiting or rebooting the OS. It also provides you with the ASUS OC

proles for the best overclocking settings in different scenarios.

GPU Boost

GPU Boost accelerates the integrated GPU for extreme graphics performance, facilitates

exible frequency adjustments, and easily delivers stable system-level upgrades for every

use.

MemOK!

MemOK!, the remarkable memory rescue tool, allows you to simply press a button to
patch memory issues, ensure memory boot compatibility, determine fail-safe settings, and
dramatically improve the system’s bootup.

ASUS Anti-Surge Protection

This special design protects expensive devices and the motherboard from damage caused
by power surges from switching power supply unit (PSU).

AI Suite II

With its user interface, ASUS AI Suite II integrates several ASUS utilities and allows you to

launch and operate these utilities simultaneously. It allows you to congure the overclocking

settings, adjust the frequencies and related voltages, remotely control the system via a
mobile device, and other easy-to-use helpful utilities.

ASUS EZ Flash 2

ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a

bootable oppy disk or an OS-based utility.

ASUS F2A85-V

1-3

ASUS MyLogo2™

Turn your favorite photos into 256-color boot logos to personalize your system.

ASUS CrashFree BIOS 3

ASUS CrashFree BIOS 3 is an auto-recovery tool that allows you to restore a corrupted BIOS

le using the bundled support DVD or a USB ash disk that contains the BIOS le.

C.P.R. (CPU Parameter Recall)

The BIOS C.P.R. feature automatically restores the CPU default settings when the system
hangs due to overclocking failure. C.P.R. eliminates the need to open the system chassis and
clear the RTC data. Simply shut down and reboot the system, and the BIOS automatically
restores the CPU parameters to their default settings.

ErP ready

The motherboard is European Union´s Energy-related Products (ErP) ready, and ErP

requires products to meet certain energy efciency requirements in regards to energy

consumptions. This is in line with ASUS vision of creating environment-friendly and energy-

efcient products through product design and innovation to reduce carbon footprint of the

product and thus mitigate environmental impacts.

1.2 Before you proceed

Take note of the following precautions before you install motherboard components or change
any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.

• Before you install or remove any component, switch off the ATX power supply and
detach its power cord. Failure to do so may cause severe damage to the motherboard,
peripherals, or components.

1-4

Chapter 1: Product introduction

F2A85-V

1.3 Motherboard overview

1.3.1 Placement direction

When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.

1.3.2 Screw holes

Place six screws into the holes indicated by circles to secure the motherboard to the chassis.

DO NOT overtighten the screws! Doing so can damage the motherboard.

Place this side towards
the rear of the chassis.

ASUS F2A85-V

1-5

1.3.3 Motherboard layout

F2A85-V

PCIEX16_1

PCIEX16_2

PCIEX1_2

PCIEX1_1

PCI1

PCI2

PCI3

USB56USB78USB910

PANEL

SPDIF_OUT

AAFP

CHA_FAN2

CPU_FAN

CHA_FAN1

Lithium Cell

CMOS Power

Super

I/O

AUDIO

Realtek
ALC887

COM

KBMS_USB34

64Mb
BIOS

SB_PWR

CLRTC

23.1cm(9.1in)

GPU_LED

DIGI

+VRM

ATX12V

GPU

30.5cm(12.0in)

AMD

®

A85X

DDR3 DIMM_A1 (64bit, 240-pin module)

DDR3 DIMM_A2 (64bit, 240-pin module)

DDR3 DIMM_B1 (64bit, 240-pin module)

DDR3 DIMM_B2 (64bit, 240-pin module)

LAN
_USB12

ESATA6G
_USB3
_12

SATA6G_4 SATA6G_5 SATA6G_6 SATA6G_7

SATA6G_1 SATA6G_2 SATA6G_3

SPDIFO
_HDMI

MemOK!

DRAM_LED

DVI_VGA

SOCKET FM2

EATXPWR

USB3_34

1 2 62 43

7

1

10

1517

14

1316 12 11

9

5

8

Atheros

8161

1-6

Chapter 1: Product introduction

1.3.4 Layout contents

F2A85-V

F2A85-V CPU socket FM2

Connectors/Jumpers/Slots/LED Page

1. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 1-26

2. CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2) 1-25

3. AMD FM2 socket 1-7

4. GPU Boost switch 1-32

5. GPU Boost LED (GPU_LED) 1-33

6. DDR3 DIMM slots 1-11

7. MemOK! switch 1-31

8. DRAM LED (DRAM_LED) 1-33

9. USB 3.0 connector (20-1 pin USB3_34) 1-30

10. SATA 6.0Gb/s connectors (7-pin SATA6G_1~7) 1-27

11. System panel connector (20-8 pin PANEL) 1-28

12. USB 2.0 connectors (10-1 pin USB56, USB78, USB910) 1-30

13. Clear RTC RAM (3-pin CLRTC) 1-22

14. Standby power LED (SB_PWR) 1-33

15. Front panel audio connector (10-1 pin AAFP) 1-29

16. Digital audio connector (4-1 pin SPDIF_OUT) 1-29

17. Serial port connector (10-1 pin COM) 1-27

1.4 Central Processing Unit (CPU)

This motherboard comes with an FM2 socket designed for AMD® A-series and Athlon™
Series processors.

ASUS F2A85-V

Ensure that you use a CPU designed for the FM2 socket. The CPU ts in only one correct

orientation. DO NOT force the CPU into the socket to prevent bending the pins and
damaging the CPU!

1-7

1.4.1 CPU installation

1

2

43

1-8

Chapter 1: Product introduction

1.4.2 CPU heatsink and fan assembly installation

Apply the Thermal Interface Material
to the CPU heatsink and CPU
before you install the heatsink and
fan if necessary.

To install the CPU heatsink and fan assembly

1

2

53 4

ASUS F2A85-V

1-9

To uninstall the CPU heatsink and fan assembly

1

3

2

4

5

1-10

Chapter 1: Product introduction

F2A85-V

F2A85-V 240-pin DDR3 DIMM sockets

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

1.5 System memory

1.5.1 Overview

This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets.

A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched
differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for
better performance with less power consumption.

The gure illustrates the location of the DDR3 DIMM sockets:

Channel Sockets

Channel A DIMM_A1 and DIMM_A2

Channel B DIMM_B1 and DIMM_B2

ASUS F2A85-V

1-11

1.5.2 Memory congurations

You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.

• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel conguration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.

• We recommend that you install the memory modules from the blue slots for better
overclocking capability.

• Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.

• Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:

- Install a maximum of 3GB system memory if you are using a 32-bit Windows

OS.

- Use a 64-bit Windows® OS if you want to install 4GB or more memory on the

motherboard.

• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.

• The maximum 64GB memory capacity can be supported with 16GB or above DIMMs.
ASUS will update the memory QVL once the DIMMs are available in the market.

• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory
frequency adjustment.

• For system stability, use a more efcient memory cooling system to support a full

memory load (4 DIMMs) or overclocking condition.

®

F2A85-V Motherboard Qualied Vendors Lists (QVL)

DDR3 2400 (O.C.) MHz capability

Vendors Part No. Size

G.SKILL F3-19200CL9D-4GBPIS(XMP) 4GB(2x 2GB) DS - - 9-11-9-28 1.65V • •
Kingmax FLLE88F-C8KKAA HAIS(XMP) 2GB SS - - 10-11-10-30 1.8V • • •

Team TXD34096M2400HC9N-L 4GB DS

Team TXD34096M2400HC9N-L 4GB DS

1-12

SS/DSChip

Brand

SEC 128
HCH9

SEC 128
HCH9

Chip NO. Timing Voltage

K4B2G0846D 9-11-11-28 1.65V • •

K4B2G0846D 9-11-11-28 1.65V • •

Chapter 1: Product introduction

DIMM socket support
(Optional)

1 DIMM 2 DIMMs 4 DIMMs

DDR3 2250 (O.C.) MHz capability

Vendors Part No. Size SS/DS

Kingston KHX2250C9D3T1K2/4GX(XMP) 4GB(2 x 2GB) DS - - - 1.65V • • •

Chip

Chip NO. Timing Voltage

Brand

DIMM socket support
(Optional)

1 DIMM 2 DIMMs 4 DIMMs

DDR3 2200 (O.C.) MHz capability

Vendors Part No. Size

GEIL GET34GB2200C9DC(XMP) 2GB DS - - 9-10-9-28 1.65V • • •
GEIL GET38GB2200C9ADC(XMP) 4GB DS - - 9-11-9-28 1.65V • • •
Kingmax FLKE85F-B8KJAA-FEIS(XMP) 2GB DS - - - - • • •
Kingmax FLKE85F-B8KHA EEIH(XMP) 4GB(2 x 2GB) DS - - - 1.5V-1.7V • •
Kingmax FLKE85F-B8KJA FEIH(XMP) 4GB(2 x 2GB) DS - - - 1.5V-1.7V • •

SS/

Chip Brand Chip NO. Timing Voltage

DS

DIMM socket support
(Optional)

1 DIMM 2 DIMMs 4 DIMMs

DDR3 2133 (O.C.) MHz capability

Vendors Part No. Size

A-DATA AX3U2133GC2G9B-DG2(XMP) 2GB SS - - 9-11-9-27

Corsair CMT16GX3M4X2133C9(XMP 1.3) 16GB(4GB x 4) DS - - 9-11-10-27 1.50V • • •
Corsair CMT4GX3M2A2133C9(XMP) 4GB(2 x 2GB) DS - - 9-10-9-24 1.65V • •
Corsair CMT4GX3M2B2133C9(XMP) 4GB(2 x 2GB) DS - - 9-10-9-27 1.50V • • •
Corsair CMT8GX3M2B2133C9(XMP) 8GB(4GB x 2) DS - - 9-11-9-27 1.50V •
G.SKILL F3-17000CL9Q-16GBZH(XMP1.3) 16GB(4GB x 4) DS - - 9-11-10-28 1.65V • •
Kingston KHX2133C11D3T1K2/16GX(XMP) 16GB(8GB x 2) DS - - - 1.6V • • •
Kingston KHX2133C9AD3T1K2/4GX(XMP) 4GB(2 x 2GB) DS - - - 1.65V • • •
Kingston KHX2133C9AD3X2K2/4GX(XMP) 4GB(2 x 2GB) DS - - 9-11-9-27 1.65V • •
Kingston KHX2133C9AD3T1K4/8GX(XMP) 8GB(4 x 2GB) DS - - 9-11-9-27 1.65V • • •
Kingston KHX2133C9AD3T1FK4/8GX(XMP) 8GB(4 x 2GB) DS - - - 1.65V • •
PATRIOT PGD38G2133C11K(XMP) 16GB(4GB x 4) DS - - 11-11-11-30 1.65V • • •

Team TXD34096M2133HC9N-L 4GB DS

Kingston KHX21C11T1BK2/16X(XMP) 16GB(8GB x 2) DS - - - 1.6V • • •
Kingston KHX21C11T1BK2/8X(XMP) 8GB(4GB x 2) DS - - - 1.6V • • •

Team TXD34096M2133HC9N-L 4GB DS

SS/DSChip

Brand

SEC 128
HCH9

SEC 128
HCH9

Chip NO. Timing Voltage

K4B2G0846D 9-11-11-28 1.65V • • •

K4B2G0846D 9-11-11-28 1.65V • • •

DIMM socket support
(Optional)

1 DIMM 2 DIMMs 4 DIMMs

1.55~

• •

1.75V

DDR3 2000 (O.C.) MHz capability

Vendors Part No. Size SS/DS

Apacer 78.AAGD5.9KD(XMP) 6GB(3 x 2GB) DS - - 9-9-9-27 1.65V • •

Corsair CMZ4GX3M2A2000C10(XMP) 4GB(2 x 2GB) SS - -

Corsair CMT6GX3M3A2000C8(XMP) 6GB(3 x 2GB) DS - - 8-9-8-24 1.65V • •
G.SKILL F3-16000CL9D-4GBFLS(XMP) 4GB(2 x 2GB) DS - - 9-9-9-24 1.65V • • •
G.SKILL F3-16000CL9D-4GBTD(XMP) 4GB(2 x 2GB) DS - - 9-9-9-27 1.65V • •
G.SKILL F3-16000CL6T-6GBPIS(XMP) 6GB(3 x 2GB) DS - - 6-9-6-24 1.65V • •
GEIL GUP34GB2000C9DC(XMP) 4GB(2 x 2GB) DS - - 9-9-9-28 1.65V • • •
Kingston KHX2000C9AD3T1K2/4GX(XMP) 4GB(2 x 2GB) DS - - - 1.65V • •
Kingston KHX2000C9AD3W1K2/4GX(XMP) 4GB(2 x 2GB) DS - - - 1.65V • •
Kingston KHX2000C9AD3T1K2/4GX(XMP) 4GB(2 x 2GB) DS - - 9 1.65V • •
Kingston KHX2000C9AD3W1K3/6GX(XMP) 6GB(3 x 2GB) DS - - - 1.65V • •
Kingston KHX2000C9AD3T1K3/6GX(XMP) 6GB(3 x 2GB) DS - - - 1.65V • •

Asint SLA302G08-ML2HB(XMP) 4GB DS HYNIX

Chip

Chip NO. Timing Voltage

Brand

H5TQ2G83BFR
H9C

10-10­10-27

- - • •

ASUS F2A85-V

DIMM socket support
(Optional)

1 DIMM 2 DIMMs 4 DIMMs

1.50V • • •

1-13