No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purposes, without the express written permission
of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not
limited to the implied warranties or conditions of merchantability or tness for a particular purpose. In no
event shall ASUS, its directors, ofcers, employees, or agents be liable for any indirect, special, incidental,
or consequential damages (including damages for loss of prots, loss of business, loss of use or data,
interruption of business and the like), even if ASUS has been advised of the possibility of such damages
arising from any defect or error in this manual or product.
Specications and information contained in this manual ae furnished for informational use only, and are
subject to change at any time without notice, and should not be construed as a commitment by ASUS.
ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual,
including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Chapter 1: Product introductionII
Contents
Revision history .......................................................................................... III
Safety information ...................................................................................... IV
2.9 OS support list ........................................................................... 2-12
Revision history
RevisionRevision historyDate
V1First release of RS720-E7/RS12; RS720-E7/RS12-E
conguration guide
ASUS RS720-E7/RS12; RS720-E7/RS12-EIII
June 2012
Safety information
Electrical Safety
• Before installing or removing signal cables, ensure that the power cables for
the system unit and all attached devices are unplugged.
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• When adding or removing any additional devices to or from the system, contact
a qualied service technician or your dealer. Ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you service.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your dealer.
Operation Safety
• Servicing of this product or units is to be performed by trained service
personnel only.
• Before operating the server, carefully read all the manuals included with the
server package.
• Before using the server, make sure all cables are correctly connected and the
power cables are not damaged. If any damage is detected, contact your dealer
as soon as possible.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Place the server on a stable
surface.
This product is equipped with a three-wire power cable and plug for the user’s
safety. Use the power cable with a properly grounded electrical outlet to avoid
electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
Heavy System
CAUTION! This server system is heavy. Ask for assistance when moving or
carrying the system.
Chapter 1: Product introductionIV
Chapter 1
This chapter describes the key features
of RS720-E7/RS12; RS720-E7/RS12-E.
It includes the product overview and
general specications.
Product introduction
1.1 Key features
High Performance 2U Storage Server
Based on the Intel® Socket R E5-2600 processor platform, the ASUS RS720-E7/
RS12; RS720-E7/RS12-E server offers customers an extensive feature set:
mass storage. high memory capacity, outstanding power efciency, quad LAN
connectivity, comprehensive server management, and exible RAID. It is an ideal
choice for customers who demand high performance and mass storage on one
product.
Mass Storage Capacity in a 2U Chassis
The RS700-E7/RS12 is built with 12 SAS/SATA 3.5” hard drive bays to support
up to 36TB storage capacity. The hot-swappable design provides non-stop high
availability, with easy maintenance and servicing.
6+1 Expansion
The RS720-E7/RS12; RS720-E7/RS12-E has high expandability with six expansion
slots, including two PCI Express 3.0 x16 slots (x8 link) or one PCI Express 3.0 x16
slot (x16 link), three PCI Express 3.0 x16 slots, and one PCI Express 3.0 x16 slot
(x8 link), meeting the demands of future expansion. In addition, a dedicated slot for
ASUS PIKE SAS RAID upgrade kits is included.
Upto92%PowerEfciency
The use of 1+1 redundant 770W 80Plus Gold power supplies offers high power
efciency for HPC applications. Also hot-swappable, power supplies can be
serviced individually without shutting down the server.
Quad LAN Support
Quad LAN teaming ports provide high networking bandwidth with load balance
and fault tolerance functions. The server supports ASUS-made and most marketavailable 10Gb LAN cards for fast networking.
Comprehensive RAID
The RS720-E7/RS12; RS720-E7/RS12-E supports ASUS RAID PIKE RAID
Solution. Users may upgrade the server from SATA to SAS storage by re-
connecting the cable from the onboard SATA to the PIKE riser card’s SAS port,
creating multiple storage options!
Complete Remote Server Management
By installing an optional web GUI-based ASMB6-iKVM module, users get full
control of the server with out-of-band management (IPMI 2.0 standard) and 24/7
real-time remote monitoring. Meanwhile, ASWM Enterprise software provides
one-to-multiple centralized management, including BIOS ashing, remote control,
power control, and asset management through a user-friendly interface. This gives
users an effective tool for remote server management.
Chapter 1: Product introduction1-2
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.