ASUS E3101 User Manual

Notebook PC

H

D

M

I

E

S

A

T

A

EXPRESS

Hardware User’s Manual

E3101 / Mar 2007

Contents

Using AC Power �� 22 Using Battery Power ��23 Battery Care �� 23 Powering ON the Notebook PC ��24 The Power-On Self Test (POST) �� 24 Checking Battery Power �� 25 Charging the Battery Pack �� 26 Power Options �� 27 Power Management Modes �� 28 Sleep and Hibernate �� 28 Thermal Power Control �� 28

Special Keyboard Functions ��29

Colored Hot Keys �� 29 Microsoft Windows Keys �� 31 Keyboard as a Numeric Keypad �� 31 Keyboard as Cursors �� 31

2

Contents

Table of Contents (Cont.)

Switches and Status Indicators ��32

Switches��32 Status Indicators �� 33 Multimedia Control Keys (on selected models) ��34

4. Using the Notebook PC

Pointing Device��36

Using the Touchpad ��36 Touchpad Usage Illustrations �� 37 Caring for the Touchpad ��38 Automatic Touchpad Disabling ��38

Storage Devices ��39

Expansion Card �� 39 Optical Drive �� 40 Flash Memory Card Reader ��42 Hard Disk Drive �� 43 Memory (RAM)��44

Connections��45

Modem Connection �� 45 Network Connection ��46 Wireless LAN Connection (on selected models) ��47 Windows Wireless Network Connection �� 48 Bluetooth Wireless Connection (on selected models) �� 49 Trusted Platform Module (TPM) (on selected models) �� 50 Fingerprint Registration (on selected models) �� 51 Antenna Connections (on selected models) �� 53

Appendix

Optional Accessories Optional Connections Operating System and Software Glossary Declarations and Safety Statements Notebook PC Information

3

Contents

4

1. Introducing the Notebook PC

About This User’s Manual Notes For This Manual Safety Precautions Preparing your Notebook PC

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

5

1 Introducing the Notebook PC

About This User’s Manual

You are reading the Notebook PC User’s Manual. This User’s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User’s Manuals:

1. Introducing the Notebook PC

Introduces you to the Notebook PC and this User’s Manual.

2. Knowing the Parts Gives you information on the Notebook PC’s components.

3. Getting Started

Gives you information on getting started with the Notebook PC.

4. Using the Notebook PC Gives you information on using the Notebook PC’s components.

5. Appendix Introduces you to optional accessories and gives additional information.

Notes For This Manual

A few notes and warnings in bold are used throughout this guide that you should be aware of in order to complete certain tasks safely and completely. These notes have different degrees of importance as described below:

NOTE: Tips and information for special situations.

TIP: Tips and useful information for completing tasks.

IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons.

WARNING! Important information that must be followed for safe operation.

< >

Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the < > or [ ] and the enclosed letters.

[ ]

6

Introducing the Notebook PC 1

Safety Precautions

The following safety precautions will increase the life of the Notebook PC. Follow all precautions and

instructions. Except as described in this manual, refer all servicing to qualied personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners,

benzene, or other chemicals on or near the surface.

IMPORTANT! Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT press or touch the display

panel. Do not place together with

small items that may scratch or enter the Notebook PC.

DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.

DO NOT leave the Notebook PC on your lap or any part of the body in order to prevent discomfort or injury from heat exposure.

SAFE TEMP: This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F)

DO NOT throw the Notebook PC in municipal waste. Check local regulations for disposal of electronic products.

DO NOT place or drop objects on top and do not shove any foreign objects into the Notebook PC.

DO NOT expose to strong magnetic

or electrical elds.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during an electrical storm.

Battery safety warning: DO NOT throw the battery in re. DO NOT short circuit the contacts. DO NOT disassemble the battery.

INPUT RATING: Refer to the rating

label on the bottom of the Notebook PC and be sure that your power adapter complies with the rating.

DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

7

1 Introducing the Notebook PC

Transportation Precautions

To prepare the Notebook PC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The hard disk drive’s head retracts when the power is turned

OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the Notebook PC while the power is still ON. Close the display panel and check that it is latched securely in the closed position to protect the keyboard and display panel.

CAUTION: The Notebook PC’s surface is easily dulled if not properly cared for. Be careful not to rub or scrape the Notebook PC surfaces.

Cover Your Notebook PC

Purchase a carrying bag to protect the Notebook PC from dirt, water, shock, and scratches.

Charge Your Batteries

If you intend to use battery power, be sure to fully charge your battery pack and any optional battery packs before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the Notebook PC is in use.

Airplane Precautions

Contact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restrictions for using electronic devices. Most airlines will allow electronic use only between and not during takeoffs and landings.

CAUTION! There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC or diskettes through airport magnetic detectors or expose them to magnetic wands.

8

Introducing the Notebook PC 1

2

1

3

Preparing your Notebook PC

These are only quick instructions for using your Notebook PC. Read the later pages for detailed information on using your Notebook PC.

1. Install the battery pack

2. Connect the AC Power Adapter

3. Open the Display Panel 4. Turn ON the Notebook PC

Open max 145 degrees.

IMPORTANT! When opening, do not force the display panel down to the table or else the hinges may break! Never lift the Notebook PC by the display panel!

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel > Power Options > System Settings.

9

1 Introducing the Notebook PC

10

2. Knowing the Parts

Basic sides of the Notebook PC

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

11

2 Knowing the Parts

1

4

3

2

1

7

6

8

9

5

11

10

Top Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The keyboard will be different for each territory.

O p e n ma x 145 degrees.

Camera Indicator

The camera indicator shows when the built-in camera is in use. The camera may be auto-activated by supported software.

12

Knowing the Parts 2

2

3

4

5

7

8

9

10

11

6

Front

Back

Multi-Position Camera

The built-in camera allows picture taking or video recording. Can be used with video conferencing and other interactive applications.

CAUTION: The lens can be adjusted facing forward or facing back-

ward but the lens can only ip through the bottom. Do not rotate the lens upward past 35 degrees.

Microphone (Built-in)

The built-in mono microphone can be used for video conferencing, voice narrations, or simple audio recordings.

Display Panel

The display panel functions the same as a desktop CRT monitor. The Notebook PC uses an active

matrix TFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop CRT monitors, the LCD panel does not produce any radiation or ickering, so it is easier on the eyes.

Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel.

Status Indicators (top)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

Instant Keys

Instant keys allow you to launch frequently used applications with one push of a button. Details are described in section 3.

Keyboard

The keyboard provides full-sized keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands. Two Windows function keys are provided to help ease navigation in the Windows operating system.

Touchpad and Buttons

The touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse. A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy Windows or web navigation.

Fingerprint Scanner

The ngerprint scanner allows use of security software using your ngerprint as your identication key.

Status Indicators (front)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

Power Switch

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel “Power Options.”

13

2 Knowing the Parts

6

5

7

2

3

1

4

Bottom Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The bottom side may vary in appearance depending on model.

NOTE: The battery pack size will vary depending on model.

WARNING! The bottom of the Notebook PC can get very hot. Be careful when handling the Notebook PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. Do not use on soft surfaces such as beds or sofas which may block the vents. DO NOT PUT THE NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.

14

Knowing the Parts 2

2

3

4

1

6

7

5

Cooling Fan

The cooling fan removes excess heat depending on temperature threshold settings.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

Wireless LAN (WLAN) Compartment

The WLAN compartment allows the installation of a wireless networking card in order to wirelessly connect to network access points or other wireless networking devices.

Memory (RAM) Compartment

The memory compartment provides expansion capabilities for additional memory. Additional memory will increase application performance by decreasing hard disk access. The BIOS automatically detects

the amount of memory in the system and congures CMOS accordingly during the POST (Power-On-

Self-Test) process. There is no hardware or software (including BIOS) setup required after the memory is installed. Visit an authorized service center or retailer for information on memory upgrades for your Notebook PC. Only purchase expansion modules from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

Hard Disk Drive Compartment

The hard disk drive is secured in a compartment. Visit an authorized service center or retailer for information on hard disk drive upgrades for your Notebook PC. Only purchase hard disk drives from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

Audio Speakers

The built-in stereo speaker system allows you to hear audio without additional attachments. The multimedia sound system features an integrated digital audio controller that produces rich, vibrant sound (results improved with external stereo headphones or speakers). Audio features are software controlled.

Battery Lock - Spring

The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.

Battery Pack

The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when moving

temporarily between locations. Battery time varies by usage and by the specications for this Notebook

PC. The battery pack cannot be disassembled and must be purchased as a single unit.

15

2 Knowing the Parts

2

3

4

1

5

1

2

3

4

5

6

7

8

9

10

11

12

Left Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Modem Port

The RJ-11 modem port with two pins is smaller than the RJ-45 LAN port and supports a standard telephone cable. The internal modem supports up to 56K V.90 transfers. The

built-in connector allows convenient use without additional adapters.

IMPORTANT! The built-in modem does not support the voltage used in digital phone systems. Do not connect the modem port to a digital phone system or else damage will occur to the Notebook PC.

LAN Port

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.

Display (Monitor) Output

The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor

or projector to allow viewing on a larger external display.

TV-Out Port

The TV-Out port is an S-Video connector that allows routing the Notebook PC’s display to a television or video projection device. You can choose between simultaneously or single display. Use an S-Video cable (not provided) for high quality displays or use the provided RCA to S-Video adapter for standard video devices. This port supports both NTSC and PAL formats.

HDMI

Display (HDMI) Output (on selected models)

The High-Denition Multimedia Interface (HDMI) is an all-digital audio/video interface capable of transmitting uncompressed streams. HDMI provides an interface between any compatible digital audio/video source, such as a set-top box, a DVD player, a PC, a video

game system, or an AV receiver and a compatible digital audio and/or video monitor, such as a digital

television (DTV). It is a modern replacement for older analogue standards such as RF - Coax, SCART, Composite Video, Component Video, VGA, DVI-A, and RCA connectors, and the consumer electronics replacement for older digital standards such as DVI (DVI-D & DVI-I).

16

Knowing the Parts 2

8

10

7

6

9

11

12

2.0

E-SATA

E-SATA Port

External SATA or eSATA allows external connection of Serial-ATA devices originally designed for use inside the computer. It is up to six times faster than existing USB 2.0,

& 1394 for external storage solutions and is also hot pluggable using shielded cables and

connectors up to two meters.

Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

SPDIF Output Jack

This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant devices for digital audio output. Use this feature to turn the Notebook PC into a hi- home

Combo

entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to

amplied speakers or headphones. Using this jack automatically disables the built-in speakers.

IEEE1394 Port

IEEE1394 is a high speed serial bus like SCSI but has simple connections and hotplugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in

high-end digital equipment and should be marked “DV” for Digital Video port.

Antenna Input

The antenna input is for TV or FM Radio (on selected models) frequency signal and allows for use with the provided digital TV/FM antenna or input from subscription television services. The provided antenna can receive digital TV or FM radio. Cable service connection can receive digital TV, analog TV, or FM radio depending on paid services. NOTE: Use the provided adapter for use with coaxial connectors.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

ExpressCard Slot

One 26pin Express card slot is available to support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

17

2 Knowing the Parts

2

3

1

4

1

2 3 4

Right Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Optical Drive

The Notebook PC comes in various models with different optical drives. The Notebook PC’s optical drive may support compact discs (CD) and/or digital video discs (DVD) and may have recordable (R) or re-writable (RW) capabilities. See the marketing specications for details on each model.

Optical Drive Activity Indicator (location varies by model)

The optical drive activity indicator shows when data is being transferred by the optical disk drive. This indicator will light in proportion to the data size transferred.

Optical Drive Electronic Eject

The optical drive eject has an electronic eject button for opening the tray. You can also eject the optical drive tray through any software player or by right clicking the optical drive in Windows “Computer” and selecting Eject.

Optical Drive Emergency Eject (location varies by model)

The emergency eject is used to eject the optical drive tray in case the electronic eject does not work. Do not use the emergency eject in place of the electronic eject.

18

Knowing the Parts 2

1 1

3

4

2

1

2

3

4

Front Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Audio Speakers

The built-in stereo speaker system allows you to hear audio without additional attachments. The multimedia sound system features an integrated digital audio controller that produces

rich, vibrant sound (results improved with external stereo headphones or speakers). Audio

features are software controlled.

Status Indicators (front)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

Flash Memory Slot

Normally an external memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile phones, and

PDAs. This Notebook PC has a built-in high-speed memory card reader that can conveniently

read from and write to many ash memory cards as mentioned later in this manual.

Infrared Port (IrDA) (front side or right side depending on model)

The infrared (IrDA) communication port allows convenient wireless data communication with infrared-equipped devices or computers. This allows easy wireless synchronization with PDAs

or mobile phones and even wireless printing to printers. If your ofce supports IrDA networking,

you can have wireless connection to a network anywhere provided there is a direct line of sight to

an IrDA node. Small ofces can use IrDA technology to share a printer between several closely placed Notebook PCs and even send les to each other without a network.

19

2 Knowing the Parts

41 2 3

1

2

2.0

3

4

Rear Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Kensington® Lock Port

The Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Notebook PC security products. These security products usually include a metal

cable and lock that prevent the Notebook PC to be removed from a xed object.

Some may also include a motion detector to sound an alarm when moved.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

Cooling Fan

The cooling fan removes excess heat depending on temperature threshold settings.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

Power (DC) Input

The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent damage to the Notebook PC and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE. BE SURE

NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

20

3. Getting Started

Using AC Power Using Battery Power Powering ON the Notebook PC Checking Battery Power Powering Options Power Management Modes Special Keyboard Functions Switches and Status Indicators

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

21

3 Getting Started

Power System

Using AC Power

The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall

outlet to the DC power required by the Notebook

PC. Your Notebook PC comes with a universal

AC-DC adapter. That means that you may connect

the power cord to any 100V-120V as well as 220V240V outlets without setting switches or using

power converters. Different countries may require

that an adapter be used to connect the provided US-standard AC power cord to a different standard. Most hotels will provide universal outlets to support different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.

TIP: You can buy travel kits for the Notebook PC that includes power and modem adapters for almost every country.

With the AC power cord connected to the AC-DC converter, connect the AC power cord to an AC outlet (preferably with surge-protection) and then connect the DC plug to the Notebook PC. Connecting the AC-DC adapter to the AC outlet rst allows you to test the AC outlet’s power and the AC-DC converter itself for compatibility problems before connecting the DC power to the Notebook PC. The power indi-

cator on the adapter (if available) will light if the power is within accepted ranges.

IMPORTANT! Damage may occur if you use a different adapter to power the Notebook PC or use the Notebook PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Notebook PC with a faulty AC-DC adapter.

NOTE: This Notebook PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.

WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

22

Getting Started 3

2

1

3

2

1

Using Battery Power

The Notebook PC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a Notebook PC retailer.

Installing and Removing the Battery Pack

Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.

IMPORTANT! Never attempt to remove the battery pack while the Notebook PC is turned ON, as this may result in the loss of working data.

To install the battery pack:

IMPORTANT! Only use battery packs and power adapters supplied with this Notebook

PC or specically approved by the manufacturer or retailer for use with this model or

else damage may occur to the Notebook PC.

To remove the battery pack:

Battery Care

The Notebook PC’s battery pack, like all rechargeable batteries, has a limit on the number times it can be recharged. The battery pack’s useful life will depend on your environment temperature, humidity, and

how your Notebook PC is used. It is ideal that the battery be used in a temperature range between 5˚C and 35˚C (41˚F and 95˚F). You must also take into account that the Notebook PC’s internal temperature

is higher than the outside temperature. Any temperatures above or below this range will shorten the life of the battery. But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must be purchased from an authorized dealer for this Notebook PC. Because batteries also have a shelf life, it is not recommended to buy extras for storing.

WARNING! For safety reasons, DO NOT throw the battery in re, DO NOT

short circuit the contacts, and DO NOT disassemble the battery. If there is any abnormal operation or damage to the battery pack caused by impact, turn OFF the Notebook PC and contact an authorized service center.

23

3 Getting Started

Powering ON the Notebook PC

The Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the

system conguration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splash screen, standard boot information such as the BIOS version can be seen. Press [ESC] and you will

be presented with a boot menu with selections to boot from your available drives.

NOTE: Before bootup, the display panel ashes when the power is turned ON. This is

part of the Notebook PC’s test routine and is not a problem with the display.

IMPORTANT! To protect the hard disk drive, always wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

WARNING! DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

The Power-On Self Test (POST)

When you turn ON the Notebook PC, it will rst run through a series of software-controlled diagnostic tests called the Power-On Self Test (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture. The POST includes a record of the Notebook PC’s

hardware conguration, which is used to make a diagnostic check of the system. This record is created

by using the BIOS Setup program. If the POST discovers a difference between the record and the exist-

ing hardware, it will display a message on the screen prompting you to correct the conict by running

BIOS Setup. In most cases the record should be correct when you receive the Notebook PC. When the

test is nished, you may get a message reporting “No operating system found” if the hard disk was not

preloaded with an operating system. This indicates that the hard disk is correctly detected and ready for the installation of a new operating system.

Self Monitoring and Reporting Technology

The S.M.A.R.T. (Self Monitoring and Reporting Technology) checks the hard disk drive during POST and gives a warning message if the hard disk drive requires servicing. If any critical hard disk drive warning is given during bootup, backup your data immediately and run Windows disk checking program. To run Window’s disk checking program: click Start > select Computer > right-click a hard disk drive icon > choose Properties > click the Tools tab > click Check Now > click Start. You can also select “Scan ... sectors” for more effective scan and repair but the process will run slower.

IMPORTANT! If warnings are still given during bootup after running a software disk checking utility, you should take your Notebook PC in for servicing. Continued use may result in data loss.

24

Getting Started 3

Checking Battery Power

The battery system implements the Smart Battery standard under the Windows environment, which allows the battery to accurately report the amount of charge left in the battery. A fully-charged battery

pack provides the Notebook PC a few hours of working power. But the actual gure varies depending

on how you use the power saving features, your general work habits, the CPU, system memory size, and the size of the display panel.

Note: Screen captures shown here are examples only and may not reect what you

see in your system.

Right-click the battery icon

Cursor over the battery icon without power adapter�

Left-click the battery icon

NOTE: You will be warned when battery power is low. If you continue to ignore the low battery warnings, the Notebook PC eventually enters suspend mode (Windows default uses STR).

WARNING! Suspend-to-RAM (STR) does not last long when the battery power is depleted. Suspend-to-Disk (STD) is not the same as power OFF. STD requires a small amount of power and will fail if no power is available due to complete battery depletion or no power supply (e.g. removing both the power adapter and battery pack).

Cursor over the battery icon with power adapter�

25

3 Getting Started

Charging the Battery Pack

Before you use your Notebook PC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Notebook PC is connected to external power using the power adapter.

Fully charge the battery pack before using it for the rst time. A new battery pack must completely charge

before the Notebook PC is disconnected from external power. It takes a few hours to fully charge the battery when the Notebook PC is turned OFF and may take twice the time when the Notebook PC is turned ON. The battery charge light turns OFF when the battery pack is charged.

NOTE: The battery stops charging if the temperature is too high or the battery voltage is too high.

WARNING! Do not leave the battery pack discharged. The battery pack will discharge over time. If not using a battery pack, it must continued to be charged every three months to extend recovery capacity or else it may fail to charge in the future.

Battery Calibration (on selected models)

BIOS provides a battery calibration function. See Appendix for details.

NOTE: If battery calibration is not necessary, this item will not be selectable.

IMPORTANT! If the battery calibration process fails, stop charging and contact an authorized service center.

26

Getting Started 3

Power Options

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows Control Panel “Power Options.”

For other options, such as “Switch User, Restart, Sleep, or Shut Down,”

click the arrowhead next to the lock icon.

Restarting or Rebooting

After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. To restart the system manually, choose Restart.

IMPORTANT! To protect the hard drive, wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

Emergency Shutdown

In case your operating system cannot properly turn OFF or restart, there are two additional ways to shutdown your Notebook PC:

(1) Hold the power button over 4 seconds, or

IMPORTANT! Do not use emergency shutdown while data is being written; doing so can result in loss or destruction of your data.

(2) Press the shutdown button on the bottom�

TIP: Use a straightened paper clip to press the shutdown button.

27

3 Getting Started

Power Management Modes

The Notebook PC has a number of automatic or adjustable power saving features that you can use to maximize battery life and lower Total Cost of Ownership (TCO). You can control some of these features through the Power menu in the BIOS Setup. ACPI power management settings are made through the operating system. The power management features are designed to save as much electricity as possible by putting components into a low power consumption mode as often as possible but also allow full operation on demand.

Sleep and Hibernate

Power management settings can be found in the Windows > Control Panel > Power Options. In System Settings, you can dene “Sleep/Hibernate”

or “Shut Down” for closing the display panel or pressing the power button.

“Sleep” and “Hibernate” saves power when your Notebook PC is not in use by turning OFF certain components. When you resume your work, your last status (such as a document scrolled down half way or email typed

half way) will reappear as if you never left. “Shut Down” will close all

applications and ask if you want to save your work if any are not saved.

Sleep is the same as Suspend-to-RAM (STR). This function stores your current data and status in RAM while many components are turned OFF. Because RAM is volatile, it requires power to keep (refresh) the data. Click the Start button and the arrowhead next to the lock icon to see this

option. You can also use the keyboard shortcut [Fn F1] to activate this mode. Recover by pressing any keyboard key except [Fn]. (NOTE: The

power indicator will blink in this mode.)

Hibernate is the same as Suspend-to-Disk (STD) and stores your current data and status on the hard

disk drive. By doing this, RAM does not have to be periodically refreshed and power consumption is greatly reduced but not completely eliminated because certain wake-up components like LAN needs to remain powered. “Hibernate” saves more power compared to “Sleep”. Click the Start button and the arrowhead next to the lock icon to see this option. Recover by pressing the power button. (NOTE: The power indicator will be OFF in this mode.)

Thermal Power Control

There are three power control methods for controlling the Notebook PC’s thermal state. These power

control cannot be congured by the user and should be known in case the Notebook PC should enter

these states. The following temperatures represent the chassis temperature (not CPU).

• The fan turns ON for active cooling when the temperature reaches the safe upper limit.

• The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.

• The system shut down for critical cooling when temperature exceeds the maximum safe upper limit.

28

Getting Started 3

Special Keyboard Functions

Colored Hot Keys

The following denes the colored hot keys on the Notebook PC’s keyboard. The colored commands can only be accessed by rst pressing and holding the function

key while pressing a key with a colored command.

NOTE: The Hot Key locations on the function keys may vary depending on model but the functions should remain the same. Follow the icons instead of the function keys.

“Zz” Icon (F1): Places the Notebook PC in suspend mode (either Save-to-RAM or Save-

to-Disk depending on sleep button setting in power management setup).

Radio Tower (F2): Wireless Models Only: Toggles the internal wireless LAN or Bluetooth (on selected models) ON or OFF with an on-screen-display. When enabled, the corresponding wireless indicator will light. Windows software settings are necessary to use the wireless LAN or Bluetooth.

Envelope Icon (F3): Pressing this button will launch your Email application while Windows is running.

“e” Icon (F4): Pressing this button will launch your Internet browser application while Windows is running.

Filled Sun Icon (F5):

Decreases the display brightness

Open Sun Icon (F6):

Increases the display brightness

LCD Icon (F7): Toggles the display panel ON and OFF. (On certain models; stretches

the screen area to ll the entire display when using low resolution modes.)

LCD/Monitor Icons (F8): Toggles between the Notebook PC’s LCD display and an external monitor in this series: Notebook PC LCD -> External Monitor -> Both. (This function does not work in 256 Colors, select High Color in Display Property Settings.)

NOTE: Must connect an external monitor “before” booting up.

Crossed-out Touchpad (F9): Toggles the built-in touchpad LOCKED (disabled)

and UNLOCKED (enabled). Locking the touchpad will prevent you from accidentally moving the cursor while typing and is best used with an external pointing device such as a mouse. NOTE: Selected models have an indicator between the

touchpad buttons will light when the touchpad is UNLOCKED (enabled) and not light when the touchpad is LOCKED (disabled).

(continued on next page)

29

3 Getting Started

Colored Hot Keys (cont.)

Speaker Icons (F10):

Toggles the speakers ON and OFF (only in Windows OS)

Speaker Down Icon (F11):

Decreases the speaker volume (only in Windows OS)

Speaker Up Icon (F12):

Increases the speaker volume (only in Windows OS)

Num Lk (Ins): Toggles the numeric keypad (number lock) ON and OFF. Allows you to use a larger portion of the keyboard for number entering.

Scr Lk (Del): Toggles the “Scroll Lock” ON and OFF. Allows you to use a larger portion of the keyboard for cell navigation.

Fn+C: Toggles “Splendid Video Intelligent Technology” function ON and OFF. This allows switching between different display color enhancement modes in order to improve contrast, brightness, skin tone, and color saturation for red, green, and

blue independently. You can see the current mode through the on-screen display (OSD).

30

Fn+V: Toggles “Life Frame” software application.

Fn+T: Toggles “Power For Phone” software application.

Power4Gear eXtreme (Fn+Space Bar): This key

toggles power savings between various power saving modes. The power saving modes control many aspects of the Notebook PC to maximize performance versus battery time. Applying or removing the power adapter will automatically switch the system between AC mode and

battery mode. You can see the current mode through the on-screen display (OSD).

Getting Started 3

Microsoft Windows Keys

There are two special Windows keys on the keyboard as described below.

The key with the Windows Logo activates the Start menu located at the bottom left of the Windows desktop.

The other key, that looks like a Windows menu with a small cursor, activates the properties menu and is equivalent to pressing the right mouse button on a Windows object.

Keyboard as a Numeric Keypad

The numeric keypad is embedded in the keyboard and consists of 15 keys that make number intensive input more convenient. These dual-purpose keys are labeled in orange on the key caps. Numeric assignments are located at the upper right hand corner

of each key as shown in the gure. When the numeric keypad is engaged by pressing [Fn][Ins/Num LK], the number lock LED lights up. If an external keyboard is connected, pressing the [Ins/Num LK]

on the external keyboard enables/disables the NumLock on both keyboards simultaneously. To disable the numeric keypad while keeping

the keypad on an external keyboard activated, press the [Fn][Ins/Num LK] keys on the Notebook PC.

Keyboard as Cursors

The keyboard can be used as cursors while Number Lock is ON or OFF in order to increase navigation ease while entering numeric data in spreadsheets or similar applications.

With Number Lock OFF, press [Fn] and one of the cursor keys shown below. For example [Fn][8] for up, [Fn][K] for down, [Fn][U] for left, and [Fn][O] for right.

With Number Lock ON, use [Shift] and one of the cursor keys shown below. For example [Shift][8] for up, [Shift][K] for down, [Shift][U] for left, and [Shift][O] for right.

NOTE: The red arrows are illustrated here for your reference. They are not labeled on the keyboard as shown here.

31

3 Getting Started

Switches and Status Indicators

Switches

Internet Launch Key

Pressing this button will launch your Internet browser application while Windows is running.

Email Launch Key

Pressing this button will launch your Email application while Windows is running.

Touchpad Lock Key

Pressing this button will lock (disable) the built-in touchpad. Locking the touchpad will prevent you from accidentally moving the cursor while typing and is best used with an external mouse (pointing device). To unlock (enable) the touchpad, simply press this button again.

Power4Gear eXtreme Key

The Power4Gear eXtreme key toggles power savings between various power saving modes. The power saving modes control many aspects of the Notebook PC to maximize performance versus battery time. Applying or removing the power adapter will automatically switch the system between AC mode and battery mode. The selected mode is shown on the display.

32

Getting Started 3

Status Indicators

Top

Front

Power Indicator

The power indicator lights when the Notebook PC is turned ON and blinks slowly when the Notebook PC is in the Suspend-to-RAM (Sleep) mode. This indicator is OFF when the Notebook PC

is turned OFF or in the Suspend-to-Disk (Hibernation) mode.

Battery Charge Indicator

The battery charge indicator is an LED that shows the status of the battery’s power as follows:

ON: The Notebook PC’s battery is charging when AC power is connected.

OFF: The Notebook PC’s battery is charged or completely drained.

Blinking: Battery power is less than 10% and the AC power is not connected.

Email Indicator

Flashes when there is one or more new email(s) in your email program’s inbox. This func-

tion requires software setup and may not be currently congured on your Notebook PC. This

function is designed for Microsoft email software only and may not work with email software from other companies.

Wireless Indicator

This is only applicable on models with built-in wireless LAN and/or built-in Bluetooth. When the built-in wireless LAN and/or built-in Bluetooth is enabled, this indicator will light. (Windows software settings are necessary.)

Drive Activity Indicator

Indicates that the Notebook PC is accessing one or more storage device(s) such as the hard

disk. The light ashes proportional to the access time.

Number Lock Indicator

Indicates that number lock [Num Lk] is activated when lighted. Number lock allows some

of the keyboard letters to act as numbers for easier numeric data input.

Capital Lock Indicator

Indicates that capital lock [Caps Lock] is activated when lighted. Capital lock allows some

of the keyboard letters to type using capitalized letters (e.g. A, B, C). When the capital lock light is OFF, the typed letters will be in the lower case form (e.g. a,b,c).

33

4 Using the Notebook PC

Multimedia Control Keys (on selected models)

The multimedia control keys allows for convenient controlling of the multimedia application. The fol-

lowing denes the meaning of each multimedia control key on the Notebook PC.

Use the [Fn] key in combination with the arrow keys for CD control functions.

CD Play/Pause

During CD stop, begins CD play. During CD play, pauses CD play.

CD Stop

During CD stop: Ejects the CD tray. During CD play: Stops CD play.

CD Skip to Previous Track (Rewind) & Audio Volume Down

During CD play, this button has two functions:

Track: The rst push will restart the current track. Second push will skip to the previous track. Audio: Hold down to decrease audio volume.

CD Skip to Next Track (Fast Forward) & Audio Volume Up

During CD play, this button has two functions:

Track: Push once to skip to the next track during CD playing. Audio: Hold down to increase audio volume.

Audio Volume Controls

Fn + Speaker Icons (F10): Toggles the audio volume ON and OFF

Fn + Down Speaker Icon (F11): Decreases the audio volume

Fn + Up Speaker Icon (F12): Increases the audio volume

34

4. Using the Notebook PC

Pointing Device Storage Devices Expansion Card Optical drive Flash memory card reader Hard disk drive Memory (RAM) Connections Modem Connection Network Connection Wireless LAN Connection Bluetooth Wireless Connection Fingerprint Scanner (on selected models) Trusted Platform Module (TPM) (on selected models)

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

35

4 Using the Notebook PC

Pointing Device

The Notebook PC’s integrated touchpad pointing device is fully compatible with all two/three-button and scrolling knob PS/2 mice. The touchpad is pressure sensitive and contains no moving parts; therefore, mechanical failures can be avoided. A device driver is still required for working with some application software.

IMPORTANT! Do not use any objects in place of your nger to operate the touchpad or else damage may occur to the touchpad’s surface.

Using the Touchpad

Light pressure with the tip of your nger is all that is

required to operate the touchpad. Because the touchpad is electrostatic sensitive, objects cannot be used in

place of your ngers. The touchpad’s primary function

is to move the cursor around or select items displayed

on the screen with the use of your ngertip instead of

a standard desktop mouse. The following illustrations demonstrate proper use of the touchpad.

Moving The Cursor

Place your nger in the center of the touchpad and

slide in a direction to move the cursor.

Slide nger

left

Slide nger

forward

Slide nger

backward

Cursor Movement

Fingerprint scanner / scroll

Right Click

Left Click

Slide nger

right

Scrolling (on selected models)

Slide your nger up or down on the right side to

scroll a window up or down.

Scrolling on the ngerprint scanner

After software setup, you can use the ngerprint

scanner as a scroll wheel like that on a mouse.

36

Scroll Up

Scroll Down

NOTE: A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy Windows or web navigation.

Using the Notebook PC 4

Touchpad Usage Illustrations

Clicking/Tapping - With the cursor over an item, press the left button or use your ngertip to touch the touchpad lightly, keeping your nger on the touchpad until the item is selected. The selected item will

change color. The following 2 examples produce the same results.

Clicking

Press the left cursor button and release.

Double-clicking/Double-tapping - This is a common skill for launching a program directly from the corresponding icon you select. Move the cursor over the icon you wish to execute, press the left button or tap the pad twice in rapid succession, and the system launches the corresponding program. If the interval between the clicks or taps is too long, the operation will not be executed. You can set the double-click speed using the Windows Control Panel “Mouse.” The following 2 examples produce the same results.

DoubleClicking

Press the left button twice and release.

Tapping

Lightly but rapidly strike the touchpad.

DoubleTapping

Lightly but rapidly strike the touchpad twice.

Dragging - Dragging means to pick up an item and place it anywhere on the screen you wish. You can

move the cursor over the item you select, and while keeping the left button depressed, moving the cursor to the desired location, then release the button. Or, you can simply double-tap on the item and hold while

dragging the item with your ngertip. The following illustrations produce the same results.

Dragging-

Clicking

Hold left button and slide nger

on touchpad.

Dragging-

Tapping

Lightly strike the touchpad twice,

sliding nger on touchpad during

second strike.

37

4 Using the Notebook PC

Caring for the Touchpad

The touchpad is pressure sensitive. If not properly cared for, it can be easily damaged. Take note of the following precautions.

• Make sure the touchpad does not come into contact with dirt, liquids or grease.

• Do not touch the touchpad if your ngers are dirty or wet.

• Do not rest heavy objects on the touchpad or the touchpad buttons.

• Do not scratch the touchpad with your nger nails or any hard objects.

NOTE: The touchpad responds to movement not to force. There is no need to tap the surface too hard. Tapping too hard does not increase the responsiveness of the touchpad. The touchpad responds best to light pressure.

Automatic Touchpad Disabling

Windows can automatically disable the Notebook PC’s touchpad when an external USB mouse is attached. This feature is normally OFF, to turn ON this feature, select the option in Windows Control Panel > Mouse Properties > Device Settings.

38

Select this option to enable this feature� Find Mouse properties in the “Control Panel”�

Using the Notebook PC 4

Storage Devices

Storage devices allow the Notebook PC to read or write documents, pictures, and other les to various

data storage devices. This Notebook PC has the following storage devices:

• Expansion Card

• Optical drive

• Flash memory reader

• Hard disk drive

Expansion Card

One 26pin Express card slot is available to support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

Inserting an Expansion Card

Be sure the ExpressCard

is level when inserting�

1. If there is an ExpressCard socket protector, remove it using the “Removing an ExpressCard” instructions below.

2. Insert the ExpressCard with the connector side

rst and label side up. Standard ExpressCards will be ush with the Notebook PC when fully

inserted.

Removing an Expansion Card

The ExpressCard slot does not have an eject button. Press the ExpressCard inwards and release to eject the ExpressCard. Carefully pull the ejected ExpressCard out of the socket.

3. Carefully connect any cables or adapters needed by the ExpressCard. Usually connectors can only be inserted in one orientation. Look for a sticker, icon, or marking on one side of the connector representing the top side.

39

4 Using the Notebook PC

Optical Drive

Inserting an optical disc

1. While the Notebook PC’s power is ON, press the drive’s eject button and the tray will eject out partially.

3. Hold the disc by the edge and face the disc’s printed side up. Push down on both sides of the disc’s center until the disc snaps onto the hub. The hub should be higher than the

disc when correctly mounted.

2. Gently pull on the drive’s front panel and slide the tray completely out. Be careful not to touch

the CD drive lens and other mechanisms. Make

sure there are no obstructions that may get jammed under the drive’s tray.

4. Slowly push the drive’s tray back in. The drive

will begin reading the table of contents (TOC) on the disc. When the drive stops, the disc is ready to be used.

NOTE: It is normal to hear as well as feel the CD spinning with great intensity in the CD drive while data is read.

40

Optical Drive (Cont.)

Using the Notebook PC 4

Removing an optical disc

Eject the tray and gently pry the edge of the disc upwards at an angle to remove the disc from the hub.

Emergency eject

Actual location will

vary by model�

The emergency eject is located in a hole on the optical drive and is used to eject the optical drive tray

in case the electronic eject does not work. Do not

use the emergency eject in place of the electronic eject. Note: Make sure not to stab the activity

indicator located in the same area.

Using the Optical Drive

Optical discs and equipment must be handled with care because of the precise mechanics involved.

Keep in mind the important safety instructions from your CD suppliers. Unlike desktop optical drives, the Notebook PC uses a hub to hold the CD in place regardless of the angle. When inserting a CD, it is important that the CD be pressed onto the center hub or else the optical drive tray will scratch the CD.

WARNING! If the CD disc is not properly locked onto the center hub, the CD can be damaged when the tray is closed. Always watch the CD closely while closing the tray slowly to prevent damage.

A CD drive letter should be present regardless of the presence of a CD disc in the drive. After the CD is

properly inserted, data can be accessed just like with hard disk drives; except that nothing can be written

to or changed on the CD. Using the proper software, a CD-RW drive or DVD+CD-RW drive can allow CD-RW discs to be used like a hard drive with writing, deleting, and editing capabilities.

Vibration is normal for all high-speed optical drives due to unbalanced CDs or CD print. To decrease vibration, use the Notebook PC on an even surface and do not place labels on the CD.

Listening to Audio CD

The optical drives can play audio CDs, but only the DVD-ROM drive can play DVD audio. Insert the audio CD and Windows automatically opens an audio player and begins playing. Depending on the DVD audio disc and installed software, it may require that you open a DVD player to listen to DVD audio.

You can adjust the volume using hotkeys or Windows speaker icon on the taskbar.

41

4 Using the Notebook PC

Memory Stick Duo/Pro/Duo Pro/MG (with MS adapater)

Memory Stick (MS) Memory Stick Magic Gate (MG) Memory Stick Select

SD (Secure Digital) MiniSD (with SD adapter)

Memory Stick Micro (with MS adapter)

xD Picture Card

MMC (Multimedia Card) MMC Plus RS-MMC (Reduced Size) (with MMC adapter)

Flash Memory Card Reader

Normally a memory card reader must be purchased separately in order to use memory cards from devices

such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC has a single built-in memory card reader that can use many ash memory cards as shown in the example below. The built-in

memory card reader is not only convenient, but also faster than most other forms of memory card readers because it utilizes the internal high-bandwidth PCI bus.

IMPORTANT! Flash memory card compatibility varies depending on Notebook PC model

and ash memory card specications. Flash memory card specications constantly

change so compatibility may change without warning.

Flash Memory Card Examples

IMPORTANT! Never remove cards while or immediately after reading, copying, formatting, or deleting data on the card or else data loss may occur.

WARNING! To prevent data loss, use “Windows Safely Remove Hard-

ware” on the taskbar before removing the ash memory card.

42

Using the Notebook PC 4

6

5

7

2

3

1

4

Hard Disk Drive

Hard disk drives have higher capacities and operate at much faster speeds than

oppy disk drives and optical drives. The Notebook PC comes with a replaceable hard

disk drive. Current hard drives support S.M.A.R.T. (Self Monitoring and Reporting Technology) to detect hard disk errors or failures before they happen. When replacing or upgrading the hard drive, always visit an authorized service center or retailer for this Notebook PC.

IMPORTANT! Poor handling of the Notebook PC may damage the hard disk drive. Handle the Notebook PC gently and keep it away from static electricity and strong vibrations or impact. The hard disk drive is the most delicate component and will likely

be the rst or only component that is damaged if the Notebook PC is dropped.

Hard Disk Drive Compartment

The hard disk drive is secured in a compartment. Visit an authorized service center or retailer for information on hard disk drive upgrades for your Notebook PC. Only purchase hard disk drives from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

Removing/Installing the screws:

Removing/Installing the drive:

43

4 Using the Notebook PC

6

5

7

2

3

1

4

3

Memory (RAM)

Additional memory will increase application performance by decreasing hard disk access. The BIOS automatically detects the amount of memory in the system

and congures CMOS accordingly during the POST (Power-On-Self-Test) process.

There is no hardware or software (including BIOS) setup required after the memory is installed.

The memory compartment provides expansion capabilities for additional memory. Visit an authorized service center or retailer for information on memory upgrades for your Notebook PC. Only purchase expansion modules from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

This is only an example�

Installing a Memory Card:

(This is only an example�) (This is only an example�)

Removing a Memory Card:

44

Using the Notebook PC 4

Connections

NOTE: The built-in modem and network cannot be installed later as an upgrade. After purchase, modem and/or network can be installed as an expansion card.

Modem Connection

The telephone wire used to connect the Notebook PC’s internal modem should have either two or four wires (only two wires (telephone line #1) is used by the modem) and should have an RJ-11 connector on both ends. Connect one end to the modem port and the other end to an analog telephone wall socket (the ones found in residential buildings). Once the driver is setup, the modem is ready to use.

NOTE: When you are connected to an online service, do not place the Notebook PC in suspend (or sleep mode) or else you will disconnect the modem connection.

Example of the Notebook PC connected to a telephone jack for use with the built-in modem:

Telephone connector

is the smaller of the two�

Telephone Wall Jack

Telephone connection is optional

Telephone cables with RJ-11 connectors

CAUTION: For electrical safety concerns, only use telephone cables rated 26AWG or higher. (see Glossary for more information)

45

4 Using the Notebook PC

Network Connection

Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Notebook PC and the other end to a hub or switch. For 100 BASE-TX / 1000 BASE-T speeds, your network cable must be category 5 or better (not category 3) with twisted-pair wiring. If you plan on running the interface at 100/1000Mbps, it must be connected to a 100 BASE-TX / 1000 BASE-T hub (not a BASE-T4

hub). For 10Base-T, use category 3, 4, or 5 twisted-pair wiring. 10/100 Mbps Full-Duplex is supported

on this Notebook PC but requires connection to a network switching hub with “duplex” enabled. The software default is to use the fastest setting so no user-intervention is required.

1000BASE-T (or Gigabit) is only supported on selected models.

Twisted-Pair Cable

The cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straight-through Twisted Pair Ethernet (TPE). The end connectors are called RJ-45 connectors, which are not compatible with RJ-11 telephone connectors. If connecting two computers together without a hub in between, a crossover LAN cable is required (Fast-Ethernet model). (Gigabit models support auto-crossover so a crossover LAN cable is optional.)

Example of the Notebook PC connected to a Network Hub or Switch for use with the built-in Ethernet controller.

LAN connector is the larger of the two�

Network Hub or Switch

Network cable with RJ-45 connectors

WARNING! Only use analog telephone outlets. The built-in modem does not support the voltage used in digital phone systems. Do not connect the RJ-11 to digital phone systems found in many commercial buildings or else damage will occur!

46

Using the Notebook PC 4

Wireless LAN Connection (on selected models)

The optional built-in wireless LAN is a compact easy-to-use wireless Ethernet adapter. Implementing the IEEE 802.11 standard for wireless LAN (WLAN), the optional built-in wireless LAN is capable of

fast data transmission rates using Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) technologies on 2.4GHz/5GHz frequencies. The optional built-in wire-

less LAN is backward compatible with the earlier IEEE 802.11 standards allowing seamless interfacing of wireless LAN standards.

The optional built-in wireless LAN is a client adapter that supports Infrastructure and Ad-hoc modes

giving you exibility on your existing or future wireless network congurations for distances up to 40

meters between the client and the access point.

To provide efcient security to your wireless communication, the optional built-in wireless LAN comes

with a 64-bit/128-bit Wired Equivalent Privacy (WEP) encryption and Wi-Fi Protected Access (WPA) features.

These are examples of the Notebook PC connected to a Wireless Network�

Ad-hoc mode

The Ad-hoc mode allows the Notebook PC to connect to another wireless device. No access point (AP) is required in this wireless environment.

(All devices must install optional 802�11 wireless LAN adapters�)

Infrastructure mode

The Infrastructure mode allows the Notebook PC and other wireless devices to join a wireless network created by an Access Point (AP) (sold separately) that provides a central link for wireless clients to communicate with each other or with a wired network.

(All devices must install optional 802�11 wireless LAN adapters�)

Notebook PC

PDA

Access

Point

Desktop PC

PDA

47

4 Using the Notebook PC

Windows Wireless Network Connection

Connecting to a network

1� Switch ON the Wireless Switch if necessary for your model (see switches in Section 3)�

2� Press [FN F2] repeatedly until Wireless LAN

ON or WLAN & Bluetooth ON is shown�

3� You should see the “Not Connected”

network icon�

5� Select “Show Wireless” if you have

many networks in your area�

2b� Or double click the Wireless Console icon on

the taskbar and select either the Wireless LAN + Bluetooth or just the Bluetooth�

4� Right click on the network icon and

select Connect to a network�

6� Select the wireless network you want

to connect to�

7� When connecting, you may have to

enter a password�

48

8� After connection has been estab-

lished, “Connected” will be shown�

Using the Notebook PC 4

Bluetooth Wireless Connection (on selected models)

Notebook PCs with Bluetooth technology eliminates the need for cables for connecting Bluetooth-enabled devices. Examples of Bluetooth-enabled devices may be Notebook PCs,

Desktop PCs, mobile phones, and PDAs.

Note: If your Notebook PC did not come with built-in Bluetooth, you need to connect a USB or ExpressCard Bluetooth module in order to use Bluetooth.

Bluetooth-enabled mobile phones

You can wireless connect to your mobile phone. Depending on your mobile phone’s capabilities, you can transfer phone book data, photos, sound les, etc. or use it as a modem to

connect to the Internet. You may also use it for SMS messaging.

Bluetooth-enabled computers or PDAs

You can wireless connect to another computer or PDA and exchange les, share peripherals, or

share Internet or network connections. You may also make use of Bluetooth-enabled wireless keyboard or mouse.

Turning ON and Launching Bluetooth Utility

This process can be used to add most Bluetooth devices. See Appendix for complete process.

1� Switch ON the Wireless Switch if necessary for your model (see switches in Section 3)�

2� Press [FN F2] repeatedly until Wireless LAN ON

or WLAN & Bluetooth ON is shown�

3� Select Add a Bluetooth Device on

the taskbar men�

2b� Or double click the Wireless Console icon on

the taskbar and select either the Wireless LAN + Bluetooth or just the Bluetooth�

3b� Or Launch Bluetooth Devices from the

Windows Control Panel�

49

4 Using the Notebook PC

Trusted Platform Module (TPM) (on selected models)

The TPM, or Trusted Platform Module, is a security hardware device on the system board that will hold computer-generated keys for encryption. It is a hardware-based solution that an help avoid attacks by hackers looking to capture passwords and encryption keys to sensitive data. The TPM provides the ability to the PC or notebook to run applications more secure and to make transactions and communication more trustworthy.

The security features provided by the TPM are internally supported by the following cryptographic capabilities of each TPM: hashing, random number generation, asymmetric key generation, and asymmetric encryption/decryption. Each individual TPM on each individual computer system has a unique signature initialized during the silicon manufacturing process that further enhances its trust/security effectiveness. Each individual TPM must have an Owner before it is useful as a security device.

TPM Applications

TPM is useful for any customer that is interested in providing an addition layer of security to the computer system. The TPM, when bundled with an optional security software package, can provide overall

system security, le protection capabilities and protect against email/privacy concerns. TPM helps

provide security that can be stronger than that contained in the system BIOS, operating system, or any non-TPM application.

Note: The TPM is disabled by default. Use BIOS setup to enable it.

Enabling TPM Security

Enter BIOS Setup (press [F2] on system startup). On Security page, set TPM Security to [Enabled]

Important: Use your TPM application’s “Restore” or “Migration” function to backup your TPM security data.

Clearing TPM Secured Data

When Supervisor Password is installed, TPM Security Clear will appear. Use this item to clear

all data secured by TPM. (You have to restart the Notebook PC after setting the password to see the security clear option.)

Important: Use should routinely backup your TPM secured data.

50

Using the Notebook PC 4

Fingerprint Registration (on selected models)

The ngerprint scanner can be used for instant and secure user authentication. These instructions will show you how to setup the ngerprint registration.

1� This wizard will automatically start when TPM is

enabled in BIOS (see Appendix)� Click Next.

3� Select a finger on the diagram� Swipe the

corresponding nger on the scanner slowly. You must swipe your nger multiple times for verication.

2� Select “Fingerprints” and click Next.

4. You must register at least two ngers to decrease

the chance of problems�

51

4 Using the Notebook PC

Fingerprint Registration (on selected models) cont.

5. Select a nger on the diagram and swipe the corresponding nger on the scanner slowly. You must swipe your nger multiple times for verication. You must register at least two ngers

to decrease the chance of any problems�

7� Right-click the icon on the taskbar

and select “Settings and Options”�

6� Click Finish when done�

8� Select “General Options” and “Single Sign On”

and congure your preferences.

52

Using the Notebook PC 4

Use an NTSC to PAL adapter if necessary.

Antenna Connections (on selected models)

This page shows multimedia connections for TV Tuner and/or FM Radio Models. TV and radio features require built-in modules only on selected models.

IMPORTANT: The Notebook PC must be used indoors when using the antenna.

Cable connection

Connect the coaxial cable from a paid television service, roof-mounted aerial antenna, or indoor “rabbit ears” to the cable adapter. Cable service connection can receive analog TV depending on paid services. The provided adapter is necessary to change the coaxial plug to t the slim Notebook PC. Attach an NTSC to PAL adapter if necessary.

IMPORTANT: Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable – installation should include bonding the screen of the coaxial cable to the earth at the building entrance.

DTV/FM antenna connection

Connect the provided digital TV/FM radio antenna to the Notebook PC using the cable adapter. The digital TV/FM radio antenna can only receive digital TV signals or FM radio broadcasted in selected regions.

Note: Digital television reception is available on selected models only and will vary by location depending on distance from transmission towers and obstructions.

Antenna placement

Horizontal: Can be safely placed on at surfaces such as

table tops, cabinets, and shelves.

Vertical: Magnets in base allows attachment to metallic surfaces such as partitions or cabinets.

53

4 Using the Notebook PC

54

Appendix

Optional Accessories & Connections Operating System and Software System BIOS Settings Common Problems and Solutions Windows Software Recovery Glossary Declarations and Safety Statements Notebook PC Information

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

A Appendix

Optional Accessories

These items, if desired, come as optional items to complement your Notebook PC.

USB Hub (Optional)

Attaching an optional USB hub will increase your USB ports and allow you to quickly connect or disconnect many USB peripherals through a single cable.

USB Flash Memory Disk

A USB ash memory disk is an optional item that can replace the 1.44MB oppy

disk and provide storage up to several hundred megabytes, higher transfer speeds, and greater durability. When used in current operating systems, no drivers are necessary.

USB Floppy Disk Drive

An optional USB-interface oppy disk drive can accept a standard 1.44MB (or 720KB) 3.5-inch oppy diskette.

WARNING! To prevent system failures, use Windows “Safely Remove Hardware” on the taskbar before disconnecting the USB

oppy disk drive. Eject the oppy disk before transporting the

Notebook PC to prevent damage from shock.

Vehicle Power Adapter

The vehicle power adapter provides a source of power for using the Notebook PC and/or charging the Notebook PC’s battery pack while in transit when no AC power is available. This product is an essential tool for today’s mobile professional. Your purchase will enhance the power, performance, and versatility of your portable computer while traveling on the road or on the sea. The Vehicle Power Adapter can be used in vehicles or boats using a standard cigarette lighter

socket. The Vehicle Power Adapter accepts input ranges from 10.8VDC (Volts

- Direct Current) to 16VDC and provides 19VDC up to 120W (Watts).

Optional Connections

These items, if desired, may be purchased from third-parties.

USB Keyboard and Mouse

Attaching an external USB keyboard will allow data entry to be more comfortable. Attaching an external USB mouse will allow Windows navigation to be more comfortable. Both the external USB keyboard and mouse will work simultaneously with the Notebook PC’s built-in keyboard and touchpad.

Printer Connection

One or more USB printers can be simultaneously used on any USB port or USB hub.

Appendix A

A Appendix

R

E

S

E

T

OFF ON

Bluetooth Mouse Setup (optional)

This process can be used to add most Bluetooth devices in Windows operating system.

1� Switch ON the Wireless Switch if necessary for your model (see switches in Section 3)�

2� Press [FN F2] repeatedly until Wireless LAN ON

or WLAN & Bluetooth ON is shown�

3� Select Add a Bluetooth Device on the taskbar

men�

2b� Or double click the Wireless Console icon on

the taskbar and select either the Wireless LAN + Bluetooth or just the Bluetooth�

3b� Or Launch Bluetooth Devices from the Windows

Control Panel�

4� Click Add�

5� Prepare the Bluetooth mouse�

• Install two “AA” batteries�

• Turn ON the power switch on the bottom of the mouse� The bottom sensor should glow red�

• Push the “RESET” button on the bottom of the Bluetooth mouse�

Appendix A

6� Click Next when the Bluetooth mouse is ready�

8� Select “Don’t use a passkey” and click Next�

7� A list of nearby Bluetooth devices will be shown�

Select the Bluetooth mouse and click Next�

9� Wait while the Bluetooth mouse is being added�

10� Click Finish when adding is complete�

Note: “RESET” may be necessary after changing batteries. Repeat steps if necessary.

11� You will see your device in the window� You can

also add or remove Bluetooth devices here�

A Appendix

Operating System and Software

This Notebook PC may offer (depending on territory) its customers the choice of a pre-installed Microsoft Windows operating system. The choices and languages will depend on the territory. The levels of

hardware and software support may vary depending on the installed operating system. The stability and compatibility of other operating systems cannot be guaranteed.

Support Software

This Notebook PC comes with a support disc that provides BIOS, drivers and applications to enable hardware features, extend functionality, help manage your Notebook PC, or add functionality not provided by the native operating system. If updates or replacement of the support disc is necessary, contact your dealer for web sites to download individual software drivers and utilities.

The support disc contains all drivers, utilities and software for all popular operating systems including those that have been pre-installed. The support disc does not include the operating system

itself. The support disc is necessary even if your Notebook PC came pre-congured in order to provide

additional software not included as part of the factory pre-install.

A recovery disc is optional and includes an image of the original operating system installed on the hard drive at the factory. The recovery disc provides a comprehensive recovery solution that quickly restores the Notebook PC’s operating system to its original working state provided that your hard disk drive is in good working order. Contact your retailer if you require such a solution.

Note: Some of the Notebook PC’s components and features may not work until the device drivers and utilities are installed.

System BIOS Settings

Boot Device

Appendix A

1. On the Boot screen, select Boot Device Priority.

2. Select each item and press [Enter] to select a device.

Battery Calibration (on selected models)

NOTE: If battery calibration is not necessary, this item will not be selectable.

1. You will rst be instructed to connect the power adapter.

2. You will then be instructed to remove the power adapter. The Notebook PC will shut down after the battery power is

used up.

3. Connect the power adapter to charge the battery.

1. On the Power screen, select Start Battery Calibration.

IMPORTANT! If the battery calibration process fails, stop charging and contact an authorized service center.

4. Battery calibration is complete after the battery charging

indicator turns OFF.

A Appendix

Security Setting

1� On the Security screen, select Change Supervisor or Change User Password.

2� Type in a password and press [Enter]�

3� Re-type the password and press [Enter]�

4� Password is then set�

To clear the password:

1� Leave the password

eld blank and press

[Enter]�

2� Password is then cleared�

Password Check

Select whether to ask for a password during bootup (Always) or only when entering the BIOS setup utility (Setup)�

Save Changes

User Access Level

Select the level of access to allow the “User Password” to have in the BIOS setup utility�

If you want to keep your conguration settings, you must

save changes before exiting the BIOS setup utility�

If you want to restore default settings, choose Load Manufacture Defaults� You must then save changes to keep the manufacture default settings�

Appendix A

Common Problems and Solutions

Hardware Problem - Optical Disc

The optical disc drive is not able to read or write discs.

1. Update the BIOS to the latest version and try again.

2. If updating the BIOS does not help, try better quality discs and try again.

3. If the problem still exist, contact your local service center and ask an engineer for assistance.

Unknown Reason - System Unstable

Cannot wake up from the hibernation.

1. Remove upgraded parts (RAM, HDD, WLAN, BT) if they were installed after purchase.

2. If not the case, try MS System Restore to an earlier date.

3. If problem still persists, try restoring your system using the recovery partition or DVD.

(NOTE: You must backup all your data to another location before recovering.)

4. If the problem still exist, contact your local service center and ask an engineer for assistance.

Hardware Problem - Keyboard / Hotkey

The Hotkey (FN) is disabled.

A. Reinstall the “ATK0100” driver from the driver CD or download it from the ASUS website.

Hardware Problem - Built-in Camera

The built-in camera does not work correctly.

1. Check “Device Manager” to see if there are any problems.

2. Try reinstalling the webcam driver to solve the problem.

3. If the problem is not solved, update the BIOS to the latest version and try again.

4. If the problem still exist, contact your local service center and ask an engineer for assistance.

Hardware Problem - Battery

Battery maintenance.

1. Register the Notebook PC for a one-year-warranty using the following website: http://member.asus.com/login.aspx?SLanguage=en-us

2. Do NOT remove the battery pack while using the Notebook PC with the AC adaptor to prevent

damage caused by the accidental power loss. The ASUS battery pack has protection circuitry to prevent over-charging so it will not damage the battery pack if it is left in the Notebook PC.

3. Store the battery pack in a dry location with temperatures between 10℃ and 30℃ if you will

not be using it for a long time. It is strongly recommended that you charge the battery pack every three months.

4. If there are any abnormal battery conditions, perform a battery calibration using BIOS setup (available on selected models).

A Appendix

Common Problems and Solutions (Cont.)

Hardware Problem - Power ON/OFF Error

I cannot power ON the Notebook PC. Diagnostics:

1. Power On by Battery only? (Y = 2, N = 4)

2. Able to see BIOS (ASUS Logo)? (Y = 3, N = A)

3. Able to load the OS? (Y = B, N = A)

4. Adapter power LED ON? (Y = 5, N = C)

5. Power ON by Adapter only? (Y = 6, N = A)

6. Able to see BIOS (ASUS Logo)? (Y = 7, N = A)

7. Able to load the OS? (Y = D, N = A)

Symptom & Solutions:

A. Problem might be in the MB, HDD, or NB; visit a local service center for assistance.

B. Problem caused by the operating system, try restoring your system using the recovery partition or

disc. (IMPORTANT: You must backup all your data to another location before recovering.)

C. Adapter problem; check the power cord connections, otherwise visit a local service center for

replacement.

D. Battery problem; please check the battery contacts, otherwise visit a local service center for

repair.

Mechanical Problem - FAN / Thermal

Why is the cooling fan always ON and the temperature high?

1. Make sure that the FAN works when the CPU temperature is high and check whether there is

air ow from the main air vent.

2. If you have many applications running (see taskbar), close them to decrease system load.

3. The problem may also be caused by some viruses, use anti-virus software to detect them.

4. If none of the above help, try restoring your system using the recovery partition or DVD.

(IMPORTANT: You must backup all your data to another location before recovering.)

(CAUTION: Do not connect to the Internet before you have installed an anti-virus software

and Internet rewall to protect yourself from viruses.)

Service - Specication, function, price

How to check whether a Notebook PC is equipped with a wireless card?

A. Enter Control Panel | System | Hardware Device | Device Manager. You will see whether

the Notebook PC has a WLAN card under the “Network Adapter” item.

Appendix A

Common Problems and Solutions (Cont.)

Software Problem - ASUS bundled software

When I power ON the Notebook PC, there will be an “Open policy le error” message.

A. Reinstall the latest version “Power4 Gear” utility to solve your problem. It is available on the

ASUS website.

Unknown Reason - Blue screen with white text

A blue screen with white text appears after system bootup.

1. Remove additional memory. If additional memory was installed after purchase, power OFF, remove the additional memory, and power ON to see if the problem is due to incompatible memory.

2. Un-install software applications. If you have installed software applications recently, they may not be compatible with your system. Try to un-install them in Windows Safe Mode.

3. Check your system for viruses.

4. Update the BIOS to the latest version with WINFLASH in Windows or AFLASH in DOS mode. These utilities and BIOS les can be downloaded from the ASUS website. (WARNING: Make sure your Notebook PC does not loose power during the BIOS ashing process.)

5. If problem still cannot be solved, use the recovery process to reinstall your entire system. (IMPORTANT: You must backup all your data to another location before recovering.)

(CAUTION: Do not connect to the Internet before you have installed an anti-virus software and Internet rewall to protect yourself from viruses.) (NOTE: Make sure that you install the “Intel INF Update” and “ATKACPI” drivers rst so that hardware devices can be recognized.)

6. If the problem still exist, contact your local service center and ask an engineer for assistance.

A Appendix

Software Problem - BIOS

Updating the BIOS.

1. Please verify the Notebook PC’s exact model and download the latest BIOS le for your model

from the ASUS website.

2. Use the “WINFLASH” utility to update your BIOS. The utility can be found in your Driver & Utility CD that came with your Notebook PC.

3. Extract the BIOS le to a temporary location (such as the root in C:\)

4. Click Start | All Programs | ASUS Utility | WINFLASH | WINFLASH

a. Select the new BIOS image le. b. Conrm the selected BIOS information. Check the model, version, and data.

c. Click Flash to initialize the BIOS updating procedure. d. Click Exit when procedure completes.

e. Reboot the system. Assuming that you have successfully ashed the BIOS le, press [F2] to

enter BIOS setup page when the ASUS logo appears during system boot-up.

f. After entering BIOS setup page, go to Exit page and choose Load Manufacture Defaults.

Then select Save and Exit and reboot the system again.

g. The BIOS ash procedure is now complete.

You can also use the “Easy Flash” function on the Advanced page of the BIOS Setup Utility� Follow the instructions shown�

You must “Load Manufacture Defaults” after

updating (ashing) the BIOS.

Appendix A

Common Problems and Solutions (Cont.)

Symantec’s Norton Internet Security (NIS)

1. Sometimes NIS will show an alert to stop a Trojan virus from a local IP address.

This problem can be solved by making sure the virus denition le is the latest one and regularly updating the virus denition le.

2. Reinstalling fails at the “Information Wizard” after uninstalling Norton Antivirus.

Make sure NIS has been uninstalled from your computer, reboot your system, install NIS again, use

“Live Update” and update the virus denition le.

3. Norton accidently blocks desired web pages or reduces download speeds.

Change the security conguration to a lower level. NIS scans virus while downloading data so network speed will be decreased.

4. Cannot login to MSN or Yahoo messenger services.

Make sure NIS has been updated and also update the Windows system by using “Windows Update”. If the problem still exist, try:

1. Open NIS 200x by clicking on the NIS icon in your system tray.

2. Open “Norton AntiVirus” in “Options” menu.

3. Click on “Instant Messenger” uncheck “MSN/Windows Messenger” from “Which Instant messengers to protect.”

5. NIS is damaged and need reinstalling.

NIS is located in the provided disc in the “NIS200x” folder (x is the version number).

6. The “Start rewall when system is booted” option is selected but it takes about one minute to startup the rewall every time I enter Windows. Windows is not responsive during this time.

If NIS rewall reduces your system speed to an intolerable level, deselect that option.

7. Much of my system speed has been reduced by NIS.

NIS will reduce your system speed (both booting and running performance) if you are using NIS’s full protection functions, NIS scans and tracks all data in the background. You can speed up your system by stopping NIS’s auto scan functions in system bootup. You can then scan virus manually when your computer is not in use.

8. Cannot uninstall NIS.

Go to Control Panel | Add or Remove Programs. Look for “Norton Internet Security 200x (Symantec Corporation)”. Click Change/Remove and choose Remove All to uninstall NIS.

A Appendix

Common Problems and Solutions (Cont.)

9. Windows Firewall must be stopped before installing “Norton Internet Security” or “Norton Personal Firewall”. How to stop Windows Firewall:

1. Click Start and then Control Panel.

2. You will have one of two control panels. Click on the Security Center icon.

3. Click on the Windows Firewall icon beneath the status updates.

4. Click Off and then click OK.

10. Why is the “Privacy Control” icon showing ‘x’? Turn off Privacy Control from “Status & Settings”.

11. Insufcient privilege message.

Many settings, including disabling or uninstalling NIS, require you to be logged into Windows with Administrator privileges. Log Off and switch to a user account with Administrator privileges.

Appendix A

Windows Vista Software Recovery

Using Hard Disk Partition

The Recovery Partition includes an image of the operating system, drivers, and utilities installed on your Notebook PC at the factory. The Recovery Partition provides a comprehensive recovery solution that quickly restores your Notebook PC’s software to its original working state, provided that your hard

disk drive is in good working order. Before using the Recovery Partition, copy your data les (such as Outlook PST les) to oppy disks or to a network drive and make note of any customized conguration

settings (such as network settings).

About the Recovery Partition

The Recovery Partition is a space reserved on your hard disk drive used to restore the operating system, drivers, and utilities installed on your Notebook PC at the factory.

IMPORTANT: Do not delete the partition named “RECOVERY”. The Recovery Partition is created at the factory and cannot be restored by the user if deleted. Take your Notebook PC to an authorized ASUS service center if you have problems with the recovery process.

Using the Recovery Partition:

1. Press [F9] during bootup (requires a Recovery Partition)

2. Press [Enter] to select Windows Setup [EMS Enabled]

3. Read the “ASUS Preload Wizard” screen and click Next.

4. Select a partition option and click Next. Partition options:

Recover Windows to rst partition only.

This option will delete only the rst partition, allowing you to keep other partitions, and create a new system partition

as drive “C”.

Recover Windows to entire HD.

This option will delete all partitions from your hard disk drive and create a new system partition as drive “C”.

Recover Windows to entire HD with 2 partition.

This option will delete all partitions from your hard drive and create two new partitions “C” (60%) and “D” (40%).

5. Follow the on-screen instructions to complete the recovery process.

NOTE: Please visit www.asus.com for updated drivers and utilities.

A Appendix

Windows Vista Software Recovery (Cont.)

Using DVD (on selected models)

The Recovery DVD includes an image of the operating system, drivers, and utilities installed on your Notebook PC at the factory. The Recovery DVD provides a comprehensive recovery solution that quickly

restores your Notebook PC’s software to its original working state, provided that your hard disk drive

is in good working order. Before using the Recovery DVD, copy your data les (such as Outlook PST les) to oppy disks or to a network drive and make note of any customized conguration settings (such

as network settings).

Using the Recovery DVD:DVD::

1. Insert the Recovery DVD into the optical drive (Notebook PC needs to be powered ON).

2. Restart the Notebook PC and press <Esc> on bootup and select the optical drive (may be labeled as

“CD/DVD”) using the down cursor and press <Enter> to boot from the Recovery DVD.

3. Select a partition option and click Next. Partition options:

Recover Windows to rst partition only.

This option will delete only the rst partition, allowing you to keep other partitions, and create a new system partition

as drive “C”.

Recover Windows to entire HD.

This option will delete all partitions from your hard disk drive and create a new system partition as drive “C”.

Recover Windows to entire HD with 2 partition.

This option will delete all partitions from your hard drive and create two new partitions “C” (60%) and “D” (40%).

4. Follow the on-screen instructions to complete the recovery process.

WARNING: Do not remove the Recovery CD (unless instructed to do so) during the recovery process or else your partitions will be unusable.

NOTE: Please visit www.asus.com for updated drivers and utilities.

Appendix A

Glossary

ACPI (Advanced Conguration and Power Management Interface)

Modern standard for reducing power usage in computers.

APM (Advanced Power Management)

Modern standard for reducing power usage in computers.

AWG (American Wire Gauge)

NOTE: This table is for general reference only and should not be used as a source of the American Wire Gauge standard as this table may not be current or complete.

Gauge Diam Area R I@3A/mm2 AWG (mm) (mm2) (ohm/km) (mA)

33 0�18 0�026 676 75 0�19 0�028 605 85 32 0�20 0�031 547 93 30 0�25 0�049 351 147 29 0�30 0�071 243 212 27 0�35 0�096 178 288 26 0�40 0�13 137 378 25 0�45 0�16 108 477

Gauge Diam Area R I@3A/mm2 AWG (mm) (mm2) (ohm/km) (mA)

24 0�50 0�20 87�5 588 0�55 0�24 72�3 715 0�60 0�28 60�7 850 22 0�65 0�33 51�7 1�0 A 0�70 0�39 44�6 1�16 A 0�75 0�44 38�9 1�32 A 20 0�80 0�50 34�1 1�51 A 0�85 0�57 30�2 1�70 A

BIOS (Basic Input/Output System)

BIOS is a set of routines that affect how the computer transfers data between computer components, such as memory, disks, and the display adapter. The BIOS instructions are built into the computer’s read-only

memory. BIOS parameters can be congured by the user through the BIOS Setup program. The BIOS can be updated using the provided utility to copy a new BIOS le into the EEPROM.

Bit (Binary Digit)

Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1.

Boot

Boot means to start the computer operating system by loading it into system memory. When the manual instructs you to “boot” your system (or computer), it means to turn ON your computer. “Reboot” means

to restart your computer. When using Windows 95 or later, selecting “Restart” from “Start | Shut Down...”

will reboot your computer.

Byte (Binary Term)

One byte is a group of eight contiguous bits. A byte is used to represent a single alphanumeric character, punctuation mark, or other symbol.

Clock Throttling

Chipset function which allows the processor’s clock to be stopped and started at a known duty cycle. Clock throttling is used for power savings, thermal management, and reducing processing speed.

A Appendix

Glossary (Cont.)

CPU (Central Processing Unit)

The CPU, sometimes called “Processor,” actually functions as the “brain” of the computer. It interprets and executes program commands and processes data stored in memory.

Device Driver

A device driver is a special set of instructions that allows the computer’s operating system to communicate with devices such as VGA, audio, Ethernet, printer, or modem.

DVD

DVD is essentially a bigger, faster CD that can hold video as well as audio and computer data. With these capacities and access rates, DVD discs can provide you with dramatically-enhanced high-color, full-motion videos, better graphics, sharper pictures, and digital audio for a theater-like experience. DVD

aims to encompass home entertainment, computers, and business information with a single digital format,

eventually replacing audio CD, videotape, laserdisc, CD-ROM, and video game cartridges.

ExpressCard

ExpressCard slot is 26 pins and support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

Hardware

Hardware is a general term referring to the physical components of a computer system, including peripherals such as printers, modems, and pointing devices.

IDE (Integrated Drive Electronics)

IDE devices integrate the drive control circuitry directly on the drive itself, eliminating the need for a separate adapter card (in the case for SCSI devices). UltraDMA/66 or 100 IDE devices can achieve up

to 33MB/Sec transfer.

IEEE1394 (1394)

Also known as iLINK (Sony) or FireWire (Apple). 1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilities like USB. The popular 1394a interface has a bandwidth of 400Mbits/sec and can handle up to 63 units on the same bus. The newer 1394b interface can support twice the speed and will appear in future models when peripherals support higher speeds. It is very likely

that 1394, together with USB, will replace Parallel, IDE, SCSI, and EIDE ports. 1394 is also used in high-end digital equipment and should be marked “DV” for Digital Video port.

Infrared Port (IrDA) (on selected models)

The infrared (IrDA) communication port allows convenient wireless data communication with infrared-equipped devices or computers up to 4Mbits/sec. This allows easy wireless synchronization with

PDAs or mobile phones and even wireless printing to printers. Small ofces can use IrDA technology to share a printer between several closely placed Notebook PCs and even send les to each other without

a network.

Appendix A

Glossary (Cont.)

Kensington® Locks

Kensington® locks (or compatible) allow the Notebook PC to be secured usually using a metal cable and

lock that prevent the Notebook PC to be removed from a xed object. Some security products may also

include a motion detector to sound an alarm when moved.

Laser Classications

As lasers became more numerous and more widely used, the need to warn users of laser hazards became

apparent. To meet this need, laser classications were established. Current classication levels vary from

optically safe, requiring no controls (Class 1) to very hazardous, requiring strict controls (Class 4).

CLASS 1: A Class 1 laser or laser system emits levels of optical energy that are eye-safe and consequently

require no controls. An example of this class of laser system is the checkout scanning device found in most grocery stores or lasers used in optical drives.

CLASS 2 & CLASS 3A: Class 2 and Class 3A lasers emit visible, continuous-wave (CW) optical ra-

diation levels slightly above the maximum permissible exposure (MPE) level. Although these lasers can cause eye damage, their brightness usually causes observers to look away or blink before eye damage occurs. These lasers have strict administrative controls requiring placement of signs warning personnel not to stare directly into the beam. Class 3A lasers must not be viewed with optically-aided devices.

CLASS 3B: Class 3B lasers, and Class 3A lasers with outputs of 2.5mW, are hazardous to personnel

who are within the beam path and look at the beam source directly or by specular reection. These lasers cannot produce hazardous diffuse reections. Personnel working with these lasers should wear

appropriate protective eye wear during any operation of the laser. Class 3B lasers have both administrative and physical controls to protect personnel. Physical controls include limited access work areas. Administrative controls include special warning signs posted outside the entrances to the laser work spaces and lights outside the entrances that warn personnel when the lasers are in use.

CLASS 4: Class 4 lasers are high-power lasers that will cause damage to unprotected eyes and skin

through intra-beam viewing and specular or diffuse reections. Consequently, no personnel should

be in a room where a Class 4 laser is operating without proper eye protection.

PCI Bus (Peripheral Component Interconnect Local Bus)

PCI bus is a specication that denes a 32-bit data bus interface. PCI is a standard widely used by expansion card manufacturers.

POST (Power On Self Test)

When you turn on the computer, it will rst run through the POST, a series of software-controlled diagnostic tests. The POST checks system memory, the motherboard circuitry, the display, the keyboard, the diskette drive, and other I/O devices.

A Appendix

Glossary (Cont.)

RAM (Random Access Memory)

RAM (usually just called memory) is the place in a computer where the operating system, application programs, and data in current use are temporarily kept so that they can be quickly reached by the computer’s processor instead of having to read from and write to slower storage such as the hard disk or optical disc.

Suspend Mode

In Save-to-RAM (STR) and Save-to-Disk (STD), the CPU clock is stopped and most of the Notebook PC

devices are put in their lowest active state. The Notebook PC enters Suspend when the system remains

idle for a specied amount of time or manually using the function keys. The time-out setting of both Hard Disk and Video can be set by the BIOS Setup. The Power LED blinks when the Notebook PC is in STR mode. In STD mode, the Notebook PC will appear to be powered OFF.

System Disk

A system disk contains the core le of an operating system and is used to boot up the operating system.

TPM (Trusted Platform Module) (on selected models)

The TPM is a security hardware device on the system board that will hold computer-generated keys for encryption. It is a hardware-based solution that can help avoid attacks by hackers looking to capture passwords and encryption keys to sensitive data. The TPM provides the ability to the PC or Notebook PC to run applications more secure and to make transactions and communication more trustworthy.

Twisted-Pair Cable

The cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straightthrough Twisted Pair Ethernet (TPE). The end connectors are called RJ-45 connectors, which are not compatible with RJ-11 telephone connectors. If connecting two computers together without a hub in between, a crossover twisted-pair is required.

UltraDMA/66 or 100

UltraDMA/66 or 100 are new specications to improve IDE transfer rates. Unlike traditional PIO mode, which only uses the rising edge of IDE command signal to transfer data, UltraDMA/66 or 100 uses both

rising edge and falling edge.

USB (Universal Serial Bus)

A new 4-pin serial peripheral bus that allows plug and play computer peripherals such as keyboard, mouse, joystick, scanner, printer and modem/ISDN to be automatically congured when they are attached physically without having to install drivers or reboot. With USB, the traditional complex cables from back panel of your PC can be eliminated.

Appendix A

Declarations and Safety Statements

DVD-ROM Drive Information

The Notebook PC comes with an optional DVD-ROM drive or a CD-ROM drive. In order to view DVD titles, you must install your own DVD viewer software. Optional DVD viewer software may be purchased with this Notebook PC. The DVD-ROM drive allows the use of both CD and DVD discs.

Regional Playback Information

Playback of DVD movie titles involves decoding MPEG2 video, digital AC3 audio and decryption of CSS

protected content. CSS (sometimes called copy guard) is the name given to the content protection scheme adopted by the motion picture industry to satisfy a need to protect against unlawful content duplication.

Although the design rules imposed on CSS licensors are many, one rule that is most relevant is playback re-

strictions on regionalized content. In order to facilitate geographically staggered movie releases, DVD video titles are released for specic geographic regions as dened in “Region Denitions” below. Copyright laws require that all DVD movies be limited to a particular region (usually coded to the region at which it is sold). While DVD movie content may be released for multiple regions, CSS design rules require that any system

capable of playing CSS encrypted content must only be capable of playing one region.

NOTE: The region setting may be changed up to ve times using the viewer software,

then it can only play DVD movies for the last region setting. Changing the region code after that will require factory resetting which is not covered by warranty. If resetting is desired, shipping and resetting costs will be at the expense of the user.

Region Denitions

Region 1

Canada, US, US Territories

Region 2

Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran, Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal, Saudi Arabia, Scotland, South Africa, Spain, Sweden, Switzerland, Syria, Turkey, UK, Greece, Former Yugoslav Republics, Slovakia

Region 3

Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand, Vietnam

Region 4

Australia, Caribbean (Except US Territories), Central America, New Zealand, Pacic Islands, South

America

Region 5

CIS, India, Pakistan, Rest of Africa, Russia, North Korea

Region 6

China

A Appendix

Internal Modem Compliancy

The Notebook PC with internal modem model complies with JATE (Japan), FCC (US, Canada, Korea,

Taiwan), and CTR21. The internal modem has been approved in accordance with Council Decision

98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN). However due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems you should contact your equipment supplier in the

rst instance.

Overview

On 4th August 1998 the European Council Decision regarding the CTR 21 has been published in the Ofcial Journal of the EC. The CTR 21 applies to all non voice terminal equipment with DTMF-dialling

which is intended to be connected to the analogue PSTN (Public Switched Telephone Network).

CTR 21 (Common Technical Regulation) for the attachment requirements for connection to the analogue public switched telephone networks of terminal equipment (excluding terminal equipment supporting

the voice telephony justied case service) in which network addressing, if provided, is by means of dual

tone multifrequency signalling.

Network Compatibility Declaration

Statement to be made by the manufacturer to the Notied Body and the vendor: “This declaration will indicate the networks with which the equipment is designed to work and any notied networks with which the equipment may have inter-working difculties”

Network Compatibility Declaration

Statement to be made by the manufacturer to the user: “This declaration will indicate the networks with

which the equipment is designed to work and any notied networks with which the equipment may have inter-working difculties. The manufacturer shall also associate a statement to make it clear where

network compatibility is dependent on physical and software switch settings. It will also advise the user to contact the vendor if it is desired to use the equipment on another network.”

Up to now the Notied Body of CETECOM issued several pan-European approvals using CTR 21. The results are Europe’s rst modems which do not require regulatory approvals in each individual European

country.

Non-Voice Equipment

Answering machines and loud-speaking telephones can be eligible as well as modems, fax machines, auto-dialers and alarm systems. Equipment in which the end-to-end quality of speech is controlled by regulations (e.g. handset telephones and in some countries also cordless telephones) is excluded.

Internal Modem Compliancy (Cont.)

Appendix A

This table shows the countries currently under the CTR21 standard

Country Applied More Testing

Austria1 Yes No Belgium Yes No Czech Republic No Not Applicable

Denmark1 Yes Yes

Finland Yes No France Yes No Germany Yes No Greece Yes No Hungary No Not Applicable Iceland Yes No Ireland Yes No Italy Still Pending Still Pending Israel No No Lichtenstein Yes No Luxemburg Yes No The Netherlands1 Yes Yes Norway Yes No Poland No Not Applicable Portugal No Not Applicable Spain No Not Applicable Sweden Yes No Switzerland Yes No United Kingdom Yes No

.

This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom.de/technologies/ctr_21.html

1

National requirements will apply only if the equipment may use pulse dialling (manufacturers may state

in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superuous).

In The Netherlands additional testing is required for series connection and caller ID facilities.

A Appendix

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING! The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or

modications not expressly approved by the party responsible for compliance could

void your authority to operate the equipment.

(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Ofce of the Federal Register, National Archives and Records Administration, U.S. Government Printing Ofce.)

CE Mark Warning

This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Appendix A

FCC Radio Frequency Interference Requirements

This device is restricted to INDOOR USE due to its operation in the 5.15 to 5.25GHz frequency range.

FCC requires this product to be used indoors for the frequency range 5.15 to 5.25GHz to reduce the potential for harmful interference to co-channel of the Mobile Satellite Systems.

High power radars are allocated as primary user of the 5.25 to 5.35GHz and 5.65 to 5.85GHz bands. These radar stations can cause interference with and / or damage this device.

IMPORTANT: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Radio Frequency (RF) Exposure Caution Statement

This equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions in the user’s manual. This equipment is for operation within 5.15 GHz and 5.25GHz frequency ranges and is restricted to indoor environments only.

FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. “The manufacturer declares that this device is limited to Channels 1 through 11 in the

2.4GHz frequency by specied rmware controlled in the USA.”

R&TTE Directive (1999/5/EC)

The following items were completed and are considered relevant and sufcient for the R&TTE (Radio & Telecommunications Terminal Equipment) directive:

• Essential requirements as in [Article 3]

• Protection requirements for health and safety as in [Article 3.1a]

• Testing for electric safety according to [EN 60950]

• Protection requirements for electromagnetic compatibility in [Article 3.1b]

• Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301]

• Testing according to [489-17]

• Effective use of the radio spectrum as in [Article 3.2]

• Radio test suites according to [EN 300 328-2]

A Appendix

Wireless Operation Channel for Different Domains

N. America 2.412-2.462 GHz Ch01 through CH11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13

France Restricted Wireless Frequency Bands

Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are:

• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)

• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz

NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.

There are few possibilities for outdoor use: On private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100mW in the 2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.

In the departments listed below, for the entire 2.4 GHz band:

• Maximum authorized power indoors is 100mW

• Maximum authorized power outdoors is 10mW

Departments in which the use of the 2400–2483.5 MHz band is permitted with an EIRP of less than

100mW indoors and less than 10mW outdoors:

01 Ain Orientales 02 Aisne 03 Allier 05 Hautes Alpes 08 Ardennes 09 Ariège 11 Aude 12 Aveyron

16 Charente 24 Dordogne 25 Doubs 26 Drôme

32 Gers 36 Indre 37 45 Loiret 50 Manche 55 Meuse 58 Nièvre

59 Nord 60 Oise 61 Orne 63 Puy du Dôme

64

Pyrénées Atlantique

70 Haute Saône 71

84 Vaucluse 88 Vosges 89 Yonne 90 94 Val de Marne

This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr)

NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW.

66 Pyrénées 67 Bas Rhin 68 Haut Rhin

Saône et Loire

Indre et Loire

75 Paris 82 Tarn et Garonne

41 Loir et Cher

Territoire de Belfort

Appendix A

UL Safety Notices

Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFPA 70).

When using the Notebook PC modem, basic safety precautions should always be followed to reduce the

risk of re, electric shock, and injury to persons, including the following:

• Do not use the Notebook PC near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

• Do not use the Notebook PC during an electrical storm. There may be a remote risk of electric shock from lightning.

• Do not use the Notebook PC in the vicinity of a gas leak.

Required for UL 1642 covering primary (non-rechargeable) and secondary (rechargeable) lithium batteries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may consist of a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by an irreversible or reversible chemical reaction.

• Do not dispose the Notebook PC battery pack in a re, as they may explode. Check with local codes for possible special disposal instructions to reduce the risk of injury to persons due to

re or explosion.

• Do not use power adapters or batteries from other devices to reduce the risk of injury to per-

sons due to re or explosion. Use only UL certied power adapters or batteries supplied by the

manufacturer or authorized retailers.

Power Safety Requirement

Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2.

A Appendix

Nordic Lithium Cautions (for lithium-ion batteries)

CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used bat-

teries according to the manufacturer’s instructions. (English)

ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente. (Italian)

VORSICHT! Explosionsgetahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)

ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til

leverandøren. (Danish)

VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. (Swedish)

VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo valmistagan ohjeiden mukaisesti. (Finnish)

ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mêre type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. (French)

ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)

(Japanese)

Appendix A

Optical Drive Safety Information

Laser Safety Information

Internal or external optical drives sold with this Notebook PC contains a CLASS 1 LASER PRODUCT. Laser classications can be found in the glossary at the end of this user’s manual.

WARNING: Making adjustments or performing procedures other than those specied

in the user’s manual may result in hazardous laser exposure. Do not attempt to disassemble the optical drive. For your safety, have the optical drive serviced only by an authorized service provider.

Service warning label

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.

WARNING: Use of controls or adjustments or performance of procedures other than those specied herein or in the laser product installation guide may result in hazardous radiation exposure.

Macrovision Corporation Product Notice

This product incorporates copyright protection technology that is protected by method claims of certain U.S.A. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

A Appendix

CTR 21 Approval (for Notebook PC with built-in Modem)

Danish

Dutch

English

Finnish

French

German

Greek

Italian

Portuguese

Spanish

Swedish

Appendix A

A Appendix

Notebook PC Information

This page is provided for recording information concerning your Notebook PC for future reference or

for technical support. Keep this User’s Manual in a secured location if passwords are lled out.

Owner’s Name: ___________________________ Owner’s Telephone: ______________

Manufacturer: _______________ Model: ___________ Serial Number: ______________

Display Size: ___________Resolution: _____________Memory Size: ______________

Retailer: _________________Location: ___________ Purchase Date: ______________

Hard Drive Manufacturer: ____________________________ Capacity: ______________

Optical Drive Manufacturer: _____________________________ Type: ______________

BIOS Version: __________________________________________Date: ______________

Accessories: _____________________________________________________________

Software

Operating System: __________Version: ___________ Serial Number: ______________

Software: _________________Version: ___________ Serial Number: ______________

Security

Supervisor Name: _______________________ Supervisor Password: ______________

User Name: ___________________________________User Password: ______________

Network

User Name: ______________Password: _________________ Domain: ______________

ASUS E3101 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

1. Introducing the Notebook PC

About This User’s Manual

Notes For This Manual

Preparing your Notebook PC

2. Knowing the Parts

Top Side

Bottom Side

Left Side

Right Side

Front Side

Rear Side

3. Getting Started

Power System

Using AC Power

Using Battery Power

Battery Care

Powering ON the Notebook PC

The Power-On Self Test (POST)

Checking Battery Power

Charging the Battery Pack

Power Options

Power Management Modes

Sleep and Hibernate

Thermal Power Control

Special Keyboard Functions

Colored Hot Keys

Microsoft Windows Keys

Keyboard as a Numeric Keypad

Keyboard as Cursors

Switches and Status Indicators

Switches

Status Indicators

Multimedia Control Keys (on selected models)

4. Using the Notebook PC

Pointing Device

Using the Touchpad

Touchpad Usage Illustrations

Caring for the Touchpad

Automatic Touchpad Disabling

Storage Devices

Expansion Card

Optical Drive

Flash Memory Card Reader

Hard Disk Drive

Memory (RAM)

Connections

Modem Connection

Network Connection

Wireless LAN Connection (on selected models)

Windows Wireless Network Connection

Bluetooth Wireless Connection (on selected models)

Trusted Platform Module (TPM) (on selected models)

Fingerprint Registration (on selected models)

Antenna Connections (on selected models)

Appendix

Optional Accessories

Optional Connections

Operating System and Software

Common Problems and Solutions

Glossary

Declarations and Safety Statements

Notebook PC Information