No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
e terms HDMI® and HDMI High-Denition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
is device complies with directive 2014/53/EU issued by the Commision of the European
Community.
is equipment complies with EU radiation exposure limits set forth for an uncontrolled
environment.
is equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Operations in the 5.15-5.35GHz band are restricted to indoor usage only.
Radio transmit power per transceiver type
FunctionFrequencyMaximum Output Power (EIRP)
2400-2483.5 MHz18.5 + / -1.5 dbm
5150-5250 MHz21.5 + / -1.5 dbm
WiFi
Bluetooth2400-2483.5 MHz8.5 + / -1.5 dbm
5250-5350 MHz
5470-5725 MHz
18.5 + / -1.5 dbm (no TPC)
21.5 + / -1.5 dbm (TPC)
25.5 + / -1.5 dbm (no TPC)
28.5 + / -1.5 dbm (TPC)
English
X570 Creator
Motherboard Layout
DDR 4_A2 (6 4 bit, 28 8-pin m odule )
DDR 4_A1 (6 4 bit, 28 8-pin m odule )
DDR 4_B2 (6 4 bit, 28 8-pin m odule )
DDR 4_B1 (6 4 bit, 28 8-pin m odule )
ATXP WR 1
PCIE1
USB 3.2 Gen1
T: USB5
B: USB6
Top:
Central/Bass
Center :
REAR SPK
Top:
LINE IN
Center :
FRONT
Bottom :
Optica l
SPDIF
Bottom :
MIC IN
PCIE4
HDLED RESET
PLED PWRBTN
PANEL1
1
1
SPK_PLED1
1
HD_AUDIO1
PCIE6
SATA3_1_2
SATA3_3_4
SATA3_A3_ A4
9
11
12
13
14
SATA3_A1_ A2
15
16
17
23
24
28
1
8
7
Dr.
Debug
18
CMOS
Battery
25
CPU_FAN1
10
M2_2
ResetPower
CHA_FAN1/WP
5
4
USB3_7 _8
1
LAN
19
RoHS
PCIE5
ATX12V1
CHA_FAN3/WP
M2_WIFI_1
CLRC
BTN1
AMD
Premium
X570
SOCKETAM4
2726
3
F_USB31_TC_1
PCIE3
2
ATX12V2
M2_1
BIOS
_FB1
BIOS
ROM
USB 3.2 G en1
T: USB1
B: USB2
PS2
Keybo ard
/Mous e
USB3_9_10
1
RGB_HEADER1
1
ADDR_LED1
1
CHA_FAN2
/WP
USB_1_2
1
CPU_FAN2/WP
CLRCMOS1
1
21
22
1
SPI_TPM_J1
29
20
PCIE2
DPI N1
HDM I1
DPI N2
USB3_3
TB_1
Top:
RJ-45
(AQUANTIA
AQC107)
TB_2
Top:
RJ-45
(I211AT)
AMD_FAN_LED1
1
6
USB3_4
30
LAN
Purity
Sound 4
TM
1
English
No. Description
18 pin 12V Power Connector (ATX12V1)
24 pin 12V Power Connector (ATX12V2)
3Chassis / Waterpump Fan Connector (CHA_FAN3/WP)
4CPU / Waterpump Fan Connector (CPU_FAN2/WP)
5CPU Fan Connector (CPU_FAN1)
62 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
7AMD FAN LED Header (AMD_FAN_LED1)
82 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
9ATX Power Connector (ATXPWR1)
10 USB 3.2 Gen1 Header (USB3_7_8)
11 Chassis / Waterpump Fan Connector (CHA_FAN1/WP)
12 Front Panel Type C USB 3.2 Gen2 Header (F_USB31_TC_1)
** ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Por t
Activity / Link LEDSpeed LED
StatusDescriptionStatusDescription
ONo Link
BlinkingData Activity
Orange
10Mbps/100Mbps/1Gbps/2.5Gbps
/5Gbps connection
OnLinkGreen10Gbps connection
*** If you use a 2-channel speak er, please connect the speaker’s plug into “Front Speaker Jack”. See the table below
for connection d etails in accordance w ith the type of speaker you use.
4
Audio Output
Channels
Front Speaker
(No. 7)
Rear Speaker
(No. 5)
Central / Bass
(No. 4)
2V------
4VV----
6VVV--
8VVVV
**** Please note that the USB3_ 5_6 do not support USB Ke yboard & mouse S3/S4/S5 Wakeup.
Line In
(No. 6)
English
X570 Creator
Chapter 1 Introduction
ank you for purchasing ASRock X570 Creator motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any modications of this documentation occur, the updated version will be available on ASRock’s
website w ithout further notice. If you require technical support related to this motherboard, please visit our website for specic information about the model you are using. You
may nd the l atest VGA cards and CPU support list on ASRock’s website a s well. ASRock
website http://www.asrock.com.
1.1 Package Contents
ASRock X570 Creator Motherboard (ATX Form Factor)
•
ASRock X570 Creator Quick Installation Guide
•
ASRock X570 Creator Support CD
•
4 x Serial ATA (SATA) Data Cables (Optional)
•
1 x ASRock SLI_HB_Bridge_2S Card (Optional)
•
1 x ASRock WiFi 2.4/5 GHz Antenna
•
1 x Right Angle Mini DisplayPort to DisplayPort Cable (Optional)
•
2 x Screws for M.2 Socket (Optional)
•
2 x Standos for M.2 Sockets (Optional)
•
5
English
1.2 Specications
Platform
CPU
Chipset
Memory
•
•
•
•
•
•
•
•
•
•
•
* For Ryzen Series CPUs (Picasso), ECC is only supported with
PRO CPUs.
* Please refer to Memory Support List on ASRock’s website for
more information. (http://www.asrock.com/)
* Please refer to page 26 for DDR4 UDIMM maximum
frequency support.
•
•
ATX Form Factor
2oz Copper PCB
Supports AMD AM4 socket Ryzen™ 2000 and 3000 series
processors
IR Digital PWM
14 Power Phase design
AMD X570
Dual Channel DDR4 Memory Technology
4 x DDR4 DIMM Slots
AMD Ryzen series CPUs (Matisse) support DDR4 4666+
(OC)/4400(OC)/4300(OC)/4266(OC)/4200(OC)/4133
(OC)/4000(OC)/3866(OC)/3800(OC)/3733(OC)/3600(OC)/
3466(OC)/3200/2933/2667/2400/2133 ECC & non-ECC, unbuered memory*
AMD Ryzen series CPUs (Pinnacle Ridge) support DDR4
3600+(OC)/3466(OC)/3200(OC)/2933/2667/2400/2133 ECC
& non-ECC, un-buered memory*
AMD Ryzen series CPUs (Picasso) support DDR4 3466+
(OC)/3200(OC)/2933/2667/2400/2133 non-ECC, un-buered
memory*
Max. capacity of system memory: 128GB
15μ Gold Contact in DIMM Slots
|
6
Expansion
Slot
AMD Ryzen series CPUs (Matisse)
3 x PCI Express 4.0 x16 Slots (PCIE1/PCIE4/PCIE6: single
•
at x16 (PCIE1); dual at x8 (PCIE1) / x8 (PCIE4); triple at x8
(PCIE1) / x8 (PCIE4) / x4 (PCIE6))*
English
X570 Creator
Graphics
AMD Ryzen series CPUs (Pinnacle Ridge)
3 x PCI Express x16 Slots (PCIE1/PCIE4/PCIE6: single at
•
Gen3x16 (PCIE1); dual at Gen3x8 (PCIE1) / Gen3x8 (PCIE4);
triple at Gen3x8 (PCIE1) / Gen3x8 (PCIE4) / Gen4x4
(PCIE 6))*
AMD Ryzen series CPUs (Picasso)
1 x PCI Express x16 Slot (single at Gen3x8 (PCIE1) or
•
Gen4x4 (PCIE6))*
* e PCIe bandwidth is dependent on the CPU installed.
* Supports NVMe SSD as boot disks
RTX series graphics cards**
** NVIDIA NVLink Bridge does not come with the package.
Please purchase it from NVIDIA® if necessary.
** is feature is only supported with Ryzen Series CPUs
(Matisse and Pinnacle Ridge).
1 x Vertical M.2 Socket (Key E) with the bundled WiFi-
•
802.11ax module (on the rear I/O)
15μ Gold Contact in VGA PCIe Slot (PCIE1)
•
TM
Integrated AMD Radeon
•
Vega Series Graphics in Ryzen
Series APU*
* Actual support may vary by CPU
DirectX 12, Pixel Shader 5.0
•
Shared memory default 2GB. Max Shared memory supports
•
up to 16GB.
* e Max shared memory 16GB requires 32GB system memory
installed.
Supports HDMI 2.0 with max. resolution up to 4K x 2K
•
(4096x2160) @ 60Hz
Supports DisplayPort 1.4 Input with max. resolution up to
•
4K x 2K (4096x2160) @ 120Hz
* DisplayPort 1.4 Input is used to connect a Type-C Monitor.
Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
•
HBR (High Bit Rate Audio) with HDMI 2.0 Ports (Compliant
HDMI monitor is required)
7
English
Audio
Supports HDR (High Dynamic Range) with HDMI 2.0
•
Supports HDCP 2.2 with HDMI 2.0 and DisplayPort 1.4
•
Ports
Supports 4K Ultra HD (UHD) playback with HDMI 2.0 and
ALC1220 Audio Codec)
Premium Blu-ray Audio support
•
Supports Surge Protection
•
Supports Purity Sound
•
- NE5532 Premium Headset Amplier for Front Panel
Audio Connector (Supports up to 600 Ohm headsets)
- Pure Power-In
- Direct Drive Technology
- PCB Isolate Shielding
- Impedance Sensing on Line Out port
- Individual PCB Layers for R/L Audio Channel
- Gold Audio Jacks
- 15μ Gold Audio Connector
Supports DTS Connect
•
TM
4
8
LAN
1 x 10 Gigabit LAN 10/100/1000/2500/5000/10000 Mb/s
(AQUANT IA® AQC107):
Supports Wake-On-LAN
•
Supports Lightning/ESD Protection
•
Supports PXE
•
1 x Gigabit LAN 10/100/1000 Mb/s (Intel® I211AT):
Supports Wake-On-LAN
•
Supports Lightning/ESD Protection
•
Supports Energy Ecient Ethernet 802.3az
•
Supports PXE
•
English
X570 Creator
Wireless
LAN
Rear Panel
I/O
Intel® 802.11ax WiFi Module
•
Supports IEEE 802.11a/b/g/n/ax
•
Supports Dual-Band (2.4/5 GHz)
•
Supports WiFi6 802.11ax (2.4Gbps)
•
2 antennas to support 2 (Transmit) x 2 (Receive) diversity
•
technology
Supports Bluetooth 5.0 + High speed class II
•
Supports MU-MIMO
•
2 x Antenna Ports
•
1 x PS/2 Mouse/Keyboard Port
•
1 x HDMI Port
•
1 x DisplayPort 1.4 Input
•
1 x Optical SPDIF Out Port
•
2 x USB 3.2 Gen2 Type-C Ports (Supports ESD Protection)
•
6 x USB 3.2 Gen1 Ports (Supports ESD Protection)
•
* Ultra USB Power is supported on USB3_5_6 ports.
* ACPI wake-up function is not supported on USB3_5_6, TB_1
and TB_2 ports.
2 x RJ-45 LAN Ports with LED (ACT/LINK LED and SPEED
•
LED)
1 x BIOS Flashback Button
•
HD Audio Jacks: Rear Speaker / Central / Bass / Line in /
•
Front Speaker / Microphone (Gold Audio Jacks)
Storage
4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,
•
RAID 1 and RAID 10), NCQ, AHCI and Hot Plug
4 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061,
•
support NCQ, AHCI and Hot Plug
1 x Hyper M.2 Socket (M2_1), supports M Key type
•
2260/2280/22110 M.2 PCI Express module up to Gen4x4
(64 Gb/s) (with Matisse) or Gen3x4 (32 Gb/s) (with Pinnacle
Ridge and Picasso)*
1 x Hyper M.2 Socket (M2_2), supports M Key type
and M.2 PCI Express module up to Gen4x4 (64 Gb/s)*
* Supports NVMe SSD as boot disks
* Supports ASRock U.2 Kit
9
English
Connector
1 x DisplayPort 1.4 Input (DPIN2)
•
1 x SPI TPM Header
•
1 x Power LED and Speaker Header
•
1 x AMD Fan LED Header
•
* e AMD Fan LED Header is compatible with a regular RGB
LED stripe.
* e AMD Fan LED Header supports LED strips of maximum
load of 3A (36W) and length up to 2.5M.
1 x RGB LED Header
•
* Supports in total up to 12V/3A, 36W LED Strip
1 x Addressable LED Header
•
* Supports in total up to 5V/3A, 15W LED Strip
1 x CPU Fan Connector (4-pin)
•
* e CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
•
Speed Control)
* e CPU/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan
•
Speed Control)
* e Chassis/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
* CPU_FAN2/WP, CHA_FAN1/WP, CHA_FAN2/WP and
CHA_FAN3/WP can auto detect if 3-pin or 4-pin fan is in use.
1 x 24 pin ATX Power Connector (Hi-Density Power
•
Connector)
1 x 8 pin 12V Power Connector (Hi-Density Power
•
Connector)
1 x 4 pin 12V Power Connector (Hi-Density Power
•
Connector)
1 x Front Panel Audio Connector (15μ Gold Audio
•
Connec tor)
1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports
•
ESD Protection)
2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports)
•
(Supports ESD Protection)
1 x Front Panel Type C USB 3.2 Gen2 Header (Supports ESD
•
Protection)
1 x Dr. Debug with LED
•
10
English
X570 Creator
BIOS
Feature
Hardware
Monitor
OS
1 x Power Button with LED
•
1 x Reset Button with LED
•
1 x Clear CMOS Button
•
AMI UEFI Legal BIOS with GUI support
•
Supports “Plug and Play”
•
ACPI 5.1 compliance wake up events
•
Supports jumperfree
•
SMBIOS 2.3 support
•
CPU, VCORE_NB, DRAM, VPPM, PCH 1.05V, +1.8V,
•
VDDP Voltage Multi-adjustment
Temperature Sensing: CPU, CPU/Water Pump, Chassis/
•
Water Pump Fans
Fan Tachometer: CPU, CPU/Water Pump, Chassis/Water
•
Pump Fans
Quiet Fan (Auto adjust chassis fan speed by CPU tempera-
Please realize that the re is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technolog y, or using third-par ty
overclocking tools. O verclocking may aect your system’s stability, or even cause damage to
the components and devices of your system. It should be done at your ow n risk and expense.
We are not responsible for possible damage caused by overclocking.
•
ErP/EuP ready (ErP/EuP ready power supply is required)
•
11
English
1.3 WiFi-802.11ax Module and ASRock WiFi 2.4/5 GHz
Antenna
WiFi-802.11ax + BT Module
is motherboard comes with an exclusive WiFi 802.11 a/b/g/n/ax + BT v5.0
module (pre-installed on the rear I/O panel) that oers support for WiFi 802.11 a/b/
g/n/ax connectivity standards and Bluetooth v5.0. WiFi + BT module is an easy-touse wireless local area network (WLAN) adapter to support WiFi + BT. Bluetooth
v5.0 standard features Smart Ready technology that adds a whole new class of
functionality into the mobile devices. BT 5.0 also includes Low Energy Technology
and ensures extraordinary low power consumption for PCs. e 2T2R WiFi
solution sets a WiFi high speed standard and oers max link rate up to 2.4Gbps.
* e transmission speed may vary according to the environment.
ASRock WiFi 2.4/5 GHz Antenna
12
English
X570 Creator
WiFi Antenna Installation Guide
Step 1
Connect the WiFi 2.4/5 GHz
Antenna to the antenna connectors. Turn
the antenna clockwise until it is securely
connected.
Step 2
Set the WiFi 2.4/5 GHz Antenna at
90-degree angle.
*You may need to adjust the direction of
the antenna for a stronger signal.
13
English
Chapter 2 Installation
is is an ATX form factor motherboard. Before you install the motherboard, study
the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard.
•
Failure to do so may cause physical injuries to you and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,
•
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
•
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
•
tighten the screws! Doing so may damage the motherboard.
14
English
X570 Creator
2.1 Installing the CPU
Unplug all power cables be fore installing the CPU.
1
2
15
English
3
16
English
X570 Creator
2.2 Installing the CPU Fan and Heatsink
Aer you install the CPU into this motherboard, it is necessary to install a larger
heatsink and cooling fan to dissipate heat. You also need to spray thermal grease
between the CPU and the heatsink to improve heat dissipation. Make sure that the
CPU and the heatsink are securely fastened and in good contact with each other.
Please turn o the power or remove the power cord before changing a CPU or heatsink.
Installing the CPU Box Cooler SR1
1
2
17
English
3
18
4
1
N
FA
_
U
P
C
English
X570 Creator
Installing the AM4 Box Cooler SR2
1
2
19
English
3
20
English
X570 Creator
4
1
N
FA
_
U
P
C
5
4-pin FAN cable
RGB LED Cable
1
N
FA
CPU_
1
D
E
L
_
N
FA
_
D
AM
+12V
*e diagrams shown here are for reference only. e headers might be in a dierent position on
your motherboard. Please refer to page 36 for the orientation of AMD Fan LED Header (AMD_
FAN_LED1).
21
English
Installing the AM4 Box Cooler SR3
1
22
2
English
X570 Creator
3
4
23
English
5
FAN1
CPU_
24
English
X570 Creator
6
1
N
FA
_
U
P
C
2
D
E
L
_
B
RG
+12V
or
7
1
N
FA
_
U
P
C
1
D
E
L
_
N
FA
_
D
AM
5
_
B
S
U
Please note that only one cable should be used at a time in this step.
If you select AMD_FAN_LED1, please install ASRock utility "ASRock Polychrome SYNC".
If you select USB connector, please install AMD utility "SR3 Settings Soware".
*e diagrams shown here are for reference only. e headers might be in a dierent position on your
motherboard. Please refer to page 36 for the orientation of AMD Fan LED Header (AMD_FAN_LED1).
25
English
2.3 Installing Memory Modules (DIMM)
is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel conguration , you always need to in stall identical (the same
brand, speed , size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Du al Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.
4. We suggest that you install the memory modules on DDR4_A 2 and DDR4_B2 rst
for better DRAM compatibility on 2 DIMM s conguration.
AMD non-XMP Memory Frequency Support
Ryzen Series CPUs (Matisse):
26
UDIMM Memory Slot
A1A2B1B2
Frequency
(Mhz)
-SR--3200
-DR--3200
-SR-SR3200
-DR-DR3200
SRSRSRSR2933
SR/DRDRSR/DRDR2667
SR/DRSR/DRSR/DRSR/DR2667
Ryzen Series CPUs (Pinnacle Ridge):
UDIMM Memory Slot
A1A2B1B2
-SR--2933
-DR--2933
-SR-SR2933
-DR-DR2933
SRSRSRSR2933
SR/DRDRSR/DRDR2667
SR/DRSR/DRSR/DRSR/DR2133-2400
Frequency
(Mhz)
English
X570 Creator
Ryzen Series CPUs (Picasso):
UDIMM Memory Slot
A1A2B1B2
-SR--2933
-DR--2667
-SR-SR2667
-DR-DR2400
SRSRSRSR2133
SR/DRDRSR/DRDR1866
SR/DRSR/DRSR/DRSR/DR1866
SR: Single rank DIMM, 1Rx4 or 1Rx8 on DIMM module label
DR: Dual rank DIMM, 2Rx4 or 2R x8 on DIMM module label
Frequency
(Mhz)
27
Loading...
+ 224 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.