Asrock X299 Taichi CLX Intel VROC Installation Guide

Intel® Virtual RAID on CPU (Intel® VROC) Conguration

Step 1: Set up UEFI and create a RAID array for bootable drive

Please make sure that your devices are installed to the same VMD domain.

A. During system boot, press <F2> or <Del> key to enter UEFI setup utility.

B. Go to Advanced Storage Conguration.

C. Enter the “Intel VMD Technology” sub-menu to congure the Intel VMD

(Volume management Device) Technology.

D. Enable VMD support for designated IOU. In this example, the "IOU2 (PCIE1)"

is enabled.

Click <F10> to save and exit. Aer the system reboots, enter UEFI setup

utility again.

1

E Go to Advanced IIO Conguration.

F. Set the M.2/PCIE slot that you have installed the VROC AIC to "x4 x4 x4 x4".

Click <F10> to save and exit. Aer the system reboots, enter UEFI setup

utility again.

G. Go to Advanced Intel Virtual RAID on CPU.

H. Press <Enter> on "All Intel VMD Controller".

2