Asrock DeskMini 310 Series Quick Installation Guide (H310M-STX/COM)

Version 1.0
Published April 2018

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

English

Intel

Chipset

Top:
RJ-45

T: USB 2.0

USB3

B: USB 3 .1 Gen1

USB4

RoHS

1

2

5

6

7

Audio

CODEC

USB_5_6

1

4

HDLED RESET

PLED PWRBTN

PANEL1

1

Mic In

USB 3.1 Gen1

USB_2

USB 3.1 Gen1

USB_1

Headphone

/ Headset

VGA1

9

8

DDR 4_A1DDR 4_A1

DDR 4_B1

DC Jack

HDMI1

DP1

1

CI1

SPEAKER1

1

Super

I/O

BIOS
ROM

M.2 W iFi

M.2 P CIe SSD

M2_2_CT1M2_1_CT1

COM1

1

CPU_FAN2 CPU_FAN1

3

1

AUDIO3

Motherboard Layout

H310M-STX / H310M-STX/COM

1

English

SATA3 SATA3

12 13

Back Side View

CMOS

Battery

2

10 11

English

H310M-STX / H310M-STX/COM

No. Description

1 CPU Fan Connector (CPU_FAN2)

2 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1)

3 CPU Fan Connector (CPU_FAN1)

4 MONO Speaker Header (SPEAKER1)

5 USB 2.0 Header (USB_5_6)

6 COM Port Header (COM1) (for H310M-STX/COM only)

7 System Panel Header (PANEL1)

8 Audio Header (AUDIO3)

9 Chassis Intrusion Header (CI1)

10 SATA3 Connector (SATA1)

11 SATA3 Connector (SATA2)

12 Clear CMOS Pad

13 SD Card Slot

3

English

Front Panel

1

No. Description No. Description

1 Headphone/Headset Jack (AUDIO1) 3 USB 3.1 Gen1 Type-C Port (USB3_2)

2 USB 3.1 Gen1 Type-A Port (USB_1) 4 Microphone Input (AUDIO2)

2

3

4

4

English

Rear Panel

H310M-STX / H310M-STX/COM

7

1 2 3

No. Description No. Description

1 DC Jack 4 D-Sub Port

(Supports 19V DC Power Adapters) 5 USB 2.0 Port (USB_3)

2 Display Port 6 USB 3.1 Gen1 Port (USB_4)

3 HDMI Port 7 LAN RJ-45 Port*

* ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Por t

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

4 5

6

5

English

Chapter 1 Introduction

ank you for purchasing H310M-STX / H310M-STX/COM motherboard. In this
documentation, Chapter 1 and 2 contains the introduction of the motherboard
and step-by-step installation guides. Chapter 3 contains the operation guide of the
soware and utilities. Chapter 4 contains the conguration guide of the BIOS setup.

Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice.

1.1 Package Contents

H310M-STX / H310M-STX/COM Motherboard (Mini-STX Form Factor)

•

H310M-STX / H310M-STX/COM Quick Installation Guide

•

H310M-STX / H310M-STX/COM Support CD

•

1 x I/O Panel Shield

•

2 x Serial ATA(SATA) Data with Power Cable (Optional)

•

1 x Screw for M.2 Socket (M2*2) (Optional)

•

1 x Screw for WiFi Module (M2*2) (Optional)

•

6

English

1.2 Specications

Platform

CPU

Chipset

Memory

•

•

•

•

•

•

•

•

•

•

•

•

H310M-STX / H310M-STX/COM

Mini-STX Form Factor

th

Supports 9

1151)
Supports CPU up to 65W
5 Power Phase design
Supports Intel® Turbo Boost 2.0 Technology

Intel® H310

Dual Channel DDR4 Memory Technology
2 x DDR4 SO-DIMM Slots
Supports DDR4 2666/2400/2133 non-ECC, un-buered
memory

Max. capacity of system memory: 64GB

Supports Intel® Extreme Memory Prole (XMP) 2.0
15μ Gold Contact in DIMM Slots

and 8th Gen Intel® CoreTM Processors (Socket

Expansion
Slot

Graphics

1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module

•

and Intel® CNVi (Integrated WiFi/BT)

Intel® UHD Graphics Built-in Visuals and the VGA outputs

•

can be supported only with processors which are GPU
integrated.
Supports Intel® UHD Graphics Built-in Visuals : Intel® Quick

•

Sync Video with AVC, MVC (S3D) and MPEG-2 Full HW
Encode1,
Intel® InTru

•

InsiderTM, Intel® UHD Graphics
DirectX 12

•

HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit,

•

HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decode
only), MPEG2, MJPEG, VC-1 (Decode only)

TM

3D, Intel® Clear Video HD Technology, Intel®

7

English

Audio

Max. shared memory 1024MB

•

* e size of maximum shared memory may vary from dierent
operating systems.

ree graphics output options: D-Sub, HDMI and DisplayPort

•

1.2

* Supports up to 2 displays simultaneously

Supports HDMI with max. resolution up to 4K x 2K

•

(4096x2160) @ 30Hz
Supports D-Sub with max. resolution up to 1920x1200 @

•

60Hz
Supports DisplayPort 1.2 with max. resolution up to 4K x 2K

•

(4096x2304) @ 60Hz
Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR

•

(High Bit Rate Audio) with HDMI Port (Compliant HDMI
monitor is required)
Supports HDCP with HDMI and DisplayPort 1.2 Ports

•

Supports 4K Ultra HD (UHD) playback with HDMI and

•

DisplayPort 1.2 Ports

Realtek ALC233 Audio Codec

•

1 x Headphone/Headset Jack

•

1 x MIC-In

•

1 x Audio Header

•

8

LAN

Front
Panel I/O

Gigabit LAN 10/100/1000 Mb/s

•

Giga PHY Intel® I219V

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

•

1 x Headphone/Headset Jack

•

1 x USB 3.1 Gen1 Type-A Port (Supports ESD Protection)

•

1 x USB 3.1 Gen1 Type-C Port (Supports ESD Protection)

•

1 x Microphone Input Jack

•

English

Rear Panel
I/O

Storage

Connector

H310M-STX / H310M-STX/COM

1 x DC Jack (Compatible with the 19V power adapter)*

•

* Please use 120W power adapter for 65W CPU and 90W power
adapter for 35W CPU.

1 x D-Sub Port

•

1 x HDMI Port

•

1 x DisplayPort 1.2

•

1 x USB 2.0 Port (Supports ESD Protection)

•

1 x USB 3.1 Gen1 Port (Supports ESD Protection)

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

•

LE D)

2 x SATA3 6.0 Gb/s with Power Connectors, support NCQ,

•

AHCI and Hot Plug
1 x Ultra M.2 Socket, support type 2280 M.2 SATA3 6.0 Gb/s

•

module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s)*

* Supports NVMe SSD as boot disks

1 x COM Port Header (for H310M-STX/COM only)

•

1 x Chassis Intrusion Header

•

2 x CPU Fan Connectors (2 x 4-pin)

•

1 x MONO Speaker Header

•

1 x Front Panel Header

•

1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports ESD

•

Protection)
1 x SD Card Socket

•

1 x Audio Header

•

BIOS
Feature

Hardware
Monitor

AMI UEFI Legal BIOS with multilingual GUI support

•

ACPI 6.0 Compliant wake up events

•

SMBIOS 2.7 Support

•

DRAM Voltage Multi-adjustment

•

CPU temperature sensing

•

CPU Fan Tachometer

•

CPU Quiet Fan (Auto adjust chassis fan speed by CPU

•

temperature)
CPU Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

•

9

English

Microso® Windows® 10 64-bit

OS

Certica­tions

Please realize that the re is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technolog y, or using third-party
overclocking tools. O verclocking may aect your system’s stability, or even cause damage to
the components and devices of your system. It should be done at your ow n risk and expense.
We are not responsible for possible damage caused by overclocking.

•

FCC, CE

•

ErP/EuP ready (ErP/EuP ready power supply is required)

•

Mini-STX Chassis Support List

Vendor Model

SilverStone Technology Inc. VT01S
AKasa A-STX04-A1B / A-STX04-M1B

10

English

H310M-STX / H310M-STX/COM

Chapter 2 Installation

is is a Mini-STX form factor motherboard. Before you install the motherboard,
study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components
or change any motherboard settings.

Make sure to unplug the power cord before installing or removing the motherboard

•

components. Failure to do so may cause physical injuries and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,

•

NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

•

in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-

•

tighten the screws! Doing so may damage the motherboard.

11

English

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not
force to in sert the CPU into the socket if above situation is found. Otherwise, the CPU
will be seriously damaged.

2. Unplug all power cables before in stalling the CPU.

1

2

A

B

12

English

H310M-STX / H310M-STX/COM

3

4

5

13

English

Please save and replace the cover if the processor i s removed. e cover must be placed if
you wish to return the motherboard for aer service.

14

English

H310M-STX / H310M-STX/COM

2.2 Installing the CPU Fan and Heatsink

1 2

FAN

CPU_

15

English

2.3 Installing Memory Modules (SO-DIMM)

is motherboard provides two 260-pin DDR4 (Double Data Rate 4) SO-DIMM
slots.

It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;
otherwise, this motherboard and SO-DIMM may be damaged.

e SO-DIMM only ts in one cor rect orientation. It will cau se permanent damage to
the mothe rboard and the SO-DIMM if you force the SO-DIMM into the slot at incorrect
orientation.

16

English

H310M-STX / H310M-STX/COM

1

2

3

17

English

2.4 Onboard Headers and Connectors

1

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
heade rs and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.

System Panel Header
(9-pi n PANEL1)
(see p.1, No. 7)

PWRBTN (Power Button):

Connec t to the power button on the chassi s front panel. You may congure the way to tur n
o your system using the power button.

RESET (Reset Button):
Connec t to the reset button on the chassi s front panel. Press the reset button to restart the
computer if the computer f reezes and fails to perform a normal restar t.

PLED (Syste m Power LED):
Connec t to the power status indicator on the chassis front panel. e LED i s on when the
system is operating. e LED keeps blinking when the system is in S1/S3 sleep state. e
LED is o when the system is in S4 sleep state or powered o (S5).

HDLED (Ha rd Drive Activity LED):
Connec t to the hard drive activity LED on the chassis front panel. e LED is on when the
hard drive is reading or wr iting data.

e front panel design may dier by chassis. A front panel module mainly consists of power
button, reset button , power LED, hard dr ive activity LED, speaker and etc. When connect­ing your chassi s front panel module to thi s header, make sure the wire a ssignments and the
pin assignments are matched correctly.

PLED+

PLED-

HDLED-

HDLED+

PWRBTN#

GND

RESET#

GND

GND

Connect the power
button, reset button and
system status indicator on
the chassis to this header
according to the pin
assignments below. Note
the positive and negative
pins before connecting
the cables.

18

English

H310M-STX / H310M-STX/COM

DUMMY

GNDGND

P+

P-

P+

P-

USB_PWR

USB_PWR

1

Front_R+

1

FAN_SPEED_CONTROL

MONO Speaker Header

(4-pin SPEAKER1)
(see p.1, No. 4)

Front_L-

Front_L+

Front_R-

Serial ATA3 Connectors
(see p.2, No. 10 and 11)

1

PIN Signal Name PIN Signal Name

1 GND 11 N/A
2 LV DS _TX+ 12 5V
3 LV DS _TX - 13 5V
4 GND 14 5V
5 GND 15 5V
6 LV DS _ RX- 16 5V
7 LV DS _ RX+ 17 N/A
8 GND 18 GND
9 GND 19 GND

10 GND 20 GND

USB 2.0 Header
(9-pin USB_5_6)
(see p.1, No. 5)

Please connect the chassis
speaker to this header.

ese two SATA3

20

connectors support SATA
data cables for internal
storage devices with up to

6.0 Gb/s data transfer rate.
*e SATA3 connectors
support 2.5-inch hard
drive (+5V) and do not
support 3.5-inch hard
drive (+12V)

ere is one header on
this motherboard. is
USB 2.0 header can
support two ports.

CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.1, No. 3)
(4-pin CPU_FAN2)
(see p.1, No. 1)

CPU_FAN_SPEED

FAN_VOLTAGE

GND

is motherboard
provides two 4-Pin CPU
fan (Quiet Fan)
connectors. If you plan to
connect a 3-Pin CPU fan,
please connect it to Pin
1-3.

19

English

Serial Port Header

1

Signa

GN

DC

R

D

1

(for H310M-STX/COM
only)
(9-pin COM1)
(see p.1, No. 6)

RTS

TXD

NC

RI

D

D

is COM1 header

CTS

supports a serial port

DS

DTR

module.

RX

Chassis Intrusion Header
(2-pin CI1)
(see p.1, No. 9)

Clear CMOS Pad
(see p.2, No. 12)

Audio Header
(5-pin AUDIO3)
(see p.1, No. 8)

1

GND

GND

l

Jack detect

Audio-R

Audio-L

is motherboard
supports CASE OPEN
detection feature that
detects if the chassis cove
has been removed. is
feature requires a chassis
with chassis intrusion
detection design.

Clear CMOS Pad allows you to
clear the data in CMOS. To clear
CMOS, disconnect the
power supply and short the Clear
CMOS Pad.

is Audio header allows you to
connect the audio cable for head­phone.

20

English

H310M-STX / H310M-STX/COM

2.5 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)
Installation Guide

e M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. e M.2 Socket (Key
E) supports type 2230 WiFi/BT module and Intel® CNVi (Integrated WiFi/BT).
* e M.2 socket does not support SATA M.2 SSDs.

Before you install Intel® Integrated Connectivity (CNVi) module, be sure to turn o the AC
po wer.

Installing the WiFi/BT module or Intel® CNVi (Integrated WiFi/BT)

Step 1

Prepare a type 2230 WiFi/BT module
or Intel® CNVi (Integrated WiFi/BT)
and the screw.

PCB Length: 3cm
Module Type: Type2230

A

Step 2

Find the nut location to be used.

21

English

Step 3

Gently insert the WiFi/BT module
or Intel® CNVi (Integrated WiFi/
BT) into the M.2 slot. Please be
aware that the module only ts in one

A

o

A

20

orientation.

Step 4

Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.

A

22

English

H310M-STX / H310M-STX/COM

2.6 M.2_SSD (NGFF) Module Installation Guide

e M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket supports type 2280 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up
to Gen3 x4 (32 Gb/s).

Installing the M.2_SSD (NGFF) Module

Step 1

Prepare a M.2_SSD (NGFF) module
and the screw.

Step 2

Gently insert the M.2 (NGFF) SSD
module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only ts in one orientation.

o

20

Step 3

Tighten the screw with a
screwdriver to secure the
module into place. Please do

NUT1NUT2

not overtighten the screw as
this might damage the module.

23

English

M.2_SSD (NGFF) Module Support List

Vendor Interface P/N

ADATA PCIe ADATA ASX7000NPC-512GT-C (XPG SX7000) (NVMe)
ADATA PCIe ADATA ASX8000NPC-512GM-C (XPG ASX8000) (NVMe)
Apacer PCIe Apacer Z280 AP240GZ280-240G (NVMe)
Intel PCIe Intel Optane Memory 32GB (MEMPEK1W032GA)(NVMe)
Intel PCIe Intel Optane Memory 16GB (MEMPEK1W016GA)(NVMe)
INTEL PCIe INTEL 600P-SSDPEKKW256G7-256GB (NVMe)
INTEL PCIe INTEL 600P-SSDPEKKW128G7-128GB (NVMe)
INTEL PCIe INTEL 6000P-SSDPEKKF256G7-256GB (NVMe)
INTEL PCIe INTEL 6000P-SSDPEKKF512G7-512GB (NVMe)
Kingston PCIe Kingston SHPM2280P2/240G
PAT RI OT PCIe PATRIOT Hellre M2 (240G) (NVMe)
PLEXTOR PCIe PLEXTOR PX-256M8PeG (NVMe)
PLEXTOR PCIe PLEXTOR PX-256M8SeGN (NVMe)
Samsung PCIe Samsung XP941-512G (MZHPU512HCGL)
Samsung PCIe Samsung 950Pro-512G (NVMe)
Samsung PCIe Samsung 950Pro-256G (NVMe)
Samsung PCIe Samsung MZ-VLW1280 (PM961) (NVMe)
Samsung PCIe Samsung MZ-VPW1280 (SM961) (NVMe)
TOSHIBA PCIe TOSHIBA XG3-128G (NVMe)
TOSHIBA PCIe TOSHIBA OCZ RD400-256G (NVMe)
WD PCIe WD WDS512G1X0C- 00ENX0 (NVMe)
WD PCIe WD WDS256G1X0C-00ENX0 (NVMe)
ADATA S ATA ADATA - SU800-SU800NS38-256GT-C-256G
ADATA SATA ADATA - SU800-SU800NS38-512GT-C-512G
Crucial SATA Crucial-CT240M500SSD4-240GB
Ezlink SATA Ezlink P51B-80-120GB
INTEL SATA INTEL-535-SSDSCKJF240A5-QS63-MLC-240G
INTEL SATA INTEL 540S-SSDSCKKW240H6-240GB
Kingston SATA Kingston-RBU-SNS8400S3/180GD
LITON SATA LITON LJH-256V2G-11-256GB
PLEXTOR SATA PLEXTOR - M7V-PX-128M7VG-128GB
PLEXTOR SATA PLEXTOR PX-128M6G-128GB
Sandisk SATA Sandisk X400-SD8SN8U-128G
Sandisk SATA Sandisk Z400s-SD8SNAT-128G
Transcend SATA Transcend TS256GMTS800-256GB
V- Co lo r SATA V-Color 120G
V-Col or SATA V-Color 240G
WD SATA WD BLUE WDS100T1B0B
WD SATA WD Green WDS240G1G0B-00RC30

24

For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details.

English

2.7 SD Card Installation Guide

H310M-STX / H310M-STX/COM

1. Locate the SD Card Slot on the back side of the motherboard

2. Carefully insert the SD Card into the slot until it clicks.

.

25

Deutsch

1 Einleitung

Vielen Dank für Ihren Kauf des H310M-STX-/ H310M-STX/COM-Motherboards. In
dieser Dokumentation enthalten Kapitel 1 und 2 die Motherboard-Vorstellung sowie
Schritt-für-Schritt-Installationsanleitungen. Kapitel 3 enthält die Bedienungsanleitung
von Soware und Dienstprogrammen. Kapitel 4 enthält die Kongurationsanleitung
der BIOS-Einrichtung.

Da die technischen Daten des Motherboards sowie die BIOS-Soware aktualisiert werden
können, kann der Inhalt dieser Dokumentation ohne Ankündigung geändert werden.

1.1 Lieferumfang

H310M-STX-/ H310M-STX/COM-Motherboard (Mini-STX-Formfaktor)

•

H310M-STX-/ H310M-STX/COM-Schnellinstallationsanleitung

•

H310M-STX-/ H310M-STX/COM-Support-CD

•

1 x E/A-Blendenabschirmung

•

2 x Serielles ATA- (SATA) Daten-/Stromkabel (optional)

•

1 x Schraube für M.2-Sockel (M2x2) (optional)

•

1 x Schraube für WLAN-Modul (M2x2) (optional)

•

26

Deutsch

1.2 Technische Daten

Mini-STX-Formfaktor

Plattform

•

H310M-STX / H310M-STX/COM

Prozessor

Chipsatz

Speicher

Erweiter­ungssteck­platz

Grak­karte

TM

Unterstützt Intel® Core

•

ten

9

Generation

Unterstützt CPU bis 65 W

•

5-Leistungsphasendesign

•

Unterstützt Intel® Turbo Boost 2.0-Technologie

•

Intel® H310

•

Dualkanal-DDR4-Speichertechnologie

•

2 x DDR4-SO-DIMM-Steckplätze

•

Unterstützt ungepuerten DDR4-2666/2400/2133-Non-ECC-

•

Speicher

Systemspeicher, max. Kapazität: 64 GB

•

Unterstützt Intel® Extreme Memory Prole (XMP) 2.0

•

15-μ-Goldkontakt in DIMM-Steckplätze

•

1 x M.2-Sockel (Key E), unterstützt Typ-2230-Wi-Fi-/-BT-

•

Modul und Intel® CNVi (WLAN/BT integriert)

Integrierte Intel® UHD Graphics-Visualisierung und VGA-

•

Ausgänge können nur mit Prozessoren unterstützt werden, die
GPU-integriert sind.
Unterstützt integrierte Intel® UHD Graphics-Visualisierung:

•

Intel® Quick Sync Video mit AVC, MVC (S3D) und MPEG-2
Full HW Encode1,
Intel® InTru

•

InsiderTM, Intel® UHD-Grak
DirectX 12

•

HWA encodieren/decodieren: AVC/H.264, HEVC/H.265

•

8 bit, HEVC/H.265 10 bit, VP8, VP9 8 bit, VP9 10 bit (nur
Dekodierung), MPEG2, MJPEG, VC-1 (nur Dekodierung)

TM

3D, Intel® Clear Video HD-Technologie, Intel®

-Prozessoren (Sockel 1151) der 8

ten

&

27

Deutsch

Audio

Max. geteilter Speicher 1024 MB

•

* Die Größe des maximalen Freigabespeichers kann je nach
Betriebssystem variieren.

Drei Grakkarten-Ausgangsoptionen: D-Sub, HDMI und

•

DisplayPort 1.2

* Unterstützt bis zu 2 Displays gleichzeitig

Unterstützt HDMI mit maximaler Auösung von 4K x 2K

•

(4096 x 2160) bei 30Hz
Unterstützt D-Sub mit maximaler Auösung von 1920 x 1200

•

bei 60 Hz
Unterstützt DisplayPort 1.2 mit maximaler Auösung von

•

4K x 2K (4096 x 2304) bei 60 Hz
Unterstützt Auto-Lippensynchronizität, hohe Farbtiefe (12 bpc),

•

xvYCC und HBR (Audio mit hoher Bitrate) mit HDMI-Port
(konformer HDMI-Monitor erforderlich)
Unterstützt HDCP mit HDMI- und DisplayPort 1.2-Ports

•

Unterstützt 4K-Ultra-HD- (UHD) Wiedergabe mit HDMI- und

•

DIsplayPort-1.2-Ports

Realtek-ALC233-Audiocodec

•

1 x Kopörer-/Headset-Anschluss

•

1 x Mikrofoneingang

•

1 x Audio-Stileiste

•

28

LAN

Front­blende,
E/A

Gigabit LAN 10/100/1000 Mb/s

•

Giga PHY Intel® I219V

•

Unterstützt Wake-On-LAN

•

Unterstützt Schutz gegen Blitzschlag/elektrostatische Entladung

•

Unterstützt energieezientes Ethernet 802.3az

•

Unterstützt PXE

•

1 x Kopörer-/Headset-Anschluss

•

1 x USB-3.1 Gen1-Typ-A-Port (unterstützt Schutz gegen

•

elektrostatische Entladung)
1 x USB-3.1 Gen1-Typ-C-Port (unterstützt Schutz gegen

•

elektrostatische Entladung)
1 x Mikrofoneingang

•