ASRock 4CORE1333-GLAN, 4CORE1333-GLAN R2.0 User Manual

4Core1333-GLAN

User Manual

Version 2.0

Published January 2008

No part of this manual may be reproduced, transcribed, transmitted, or translated in

any language, in any form or by any means, except duplication of documentation by

the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this manual may or may not be regis-

tered trademarks or copyrights of their respective companies, and are used only for

identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Disclaimer:Disclaimer:

Specifications and information contained in this manual are furnished for informa-

tional use only and subject to change without notice, and should not be constructed

as a commitment by ASRock. ASRock assumes no responsibility for any errors or

omissions that may appear in this manual.

With respect to the contents of this manual, ASRock does not provide warranty of

any kind, either expressed or implied, including but not limited to the implied warran-

ties or conditions of merchantability or fitness for a particular purpose.

In no event shall ASRock, its directors, officers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of profits, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

ContentsContents

Contents

ContentsContents

1 Introduction1 Introduction

1 Introduction

1 Introduction1 Introduction

1.1 Package Contents .......................................................... 5

1.2 Specifications ................................................................. 6

1.3 Minimum Hardware Requirement Table for Windows

VistaTM Premium 2007 and Basic Logo.......................... 9

1.4 Motherboard Layout ........................................................ 10

1.5 ASRock HD 6CH I/O Panel ............................................. 11

2 Installation2 Installation

2 Installation

2 Installation2 Installation

2.1 Screw Holes ................................................................... 12

2.2 Pre-installation Precautions ............................................ 12

2.3 CPU Installation .............................................................. 13

2.4 Installation of Heatsink and CPU fan ............................... 15

2.5 Installation of Memory Modules (DIMM) ......................... 16

2.6 Expansion Slots (PCI and PCI Express Slots) ..................... 18

2.7 Jumpers Setup ............................................................... 19

2.8 Onboard Headers and Connectors .................................. 20

2.9 HDMI_SPDIF Header Connection Guide ......................... 24

2.10 SATAII Hard Disk Setup Guide ........................................ 25

2.11 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks

Installation ...................................................................... 26

2.12 Driver Installation Guide .............................................. 26

2.13 Untied Overclocking Technology ................................... 26

3 BIOS S3 BIOS S

3 BIOS S

3 BIOS S3 BIOS S

ETUP UTILITYETUP UTILITY

ETUP UTILITY

ETUP UTILITYETUP UTILITY

3.1 Introduction ..................................................................... 27

3.1.1 BIOS Menu Bar ..................................................... 27

3.1.2 Navigation Keys .................................................... 28

3.2 Main Screen ................................................................... 28

3.3 Advanced Screen ............................................................ 28

3.3.1 CPU Configuration ................................................ 29

3.3.2 Chipset Configuration ............................................ 31

3.3.3 ACPI Configuration ................................................ 33

3.3.4 IDE Configuration .................................................. 34

3.3.5 PCIPnP Configuration ........................................... 36

3.3.6 Floppy Configuration ............................................. 37

3.3.7 Super IO Configuration .......................................... 37

3.3.8 USB Configuration ................................................ 39

3.4 Hardware Health Event Monitoring Screen ...................... 39

3.5 Boot Screen ................................................................... 40

3.5.1 Boot Settings Configuration ................................... 41

......................................................................................................

...................................................

......................................................................................................

..........................................................................................................

.....................................................

..........................................................................................................

....................................................................................

..........................................

....................................................................................

5 5

12 12

27 27

3.6 Security Screen .............................................................. 41

3.7 Exit Screen .................................................................... 42

4 Software Support4 Software Support

4 Software Support

4 Software Support4 Software Support

4.1 Install Operating System ................................................ 43

4.2 Support CD Information ................................................... 43

4.2.1 Running Support CD ............................................. 43

4.2.2 Drivers Menu ......................................................... 43

4.2.3 Utilities Menu ........................................................ 43

4.2.4 Contact Information ............................................... 43

....................................................................................

..........................................

....................................................................................

43 43

Chapter 1 IntroductionChapter 1 Introduction

Chapter 1 Introduction

Chapter 1 IntroductionChapter 1 Introduction

Thank you for purchasing ASRock 4Core1333-GLAN motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to ASRock’s commitment to qual-

ity and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-

step guide to the hardware installation. Chapter 3 and 4 contain the configuration

guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 P1.1 P

ackack

1.1 P

1.1 P1.1 P

ASRock 4Core1333-GLAN Motherboard

(ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm)

ASRock 4Core1333-GLAN Quick Installation Guide ASRock 4Core1333-GLAN Support CD

One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable

One Ribbon Cable for a 3.5-in Floppy Drive

One Serial ATA (SATA) Data Cable (Optional)

One Serial ATA (SATA) HDD Power Cable (Optional)

One HDMI_SPDIF Cable (Optional)

One “ASRock HD 6CH I/O” I/O Panel Shield

age Contentsage Contents

ack

age Contents

ackack

age Contentsage Contents

http://www.asrock.com

1.21.2

SpecificationsSpecifications

1.2

Specifications

1.21.2

SpecificationsSpecifications

Platform - ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm CPU - LGA 775 for Intel

2 Duo / Pentium® Dual Core / Celeron®, supporting Quad Core

Yorkfield and Dual Core Wolfdale processors

- Compatible with all FSB1333/1066/800MHz CPUs

- Supports Hyper-Threading Technology (see CAUTION 1)

- Supports Untied Overclocking Technology (see CAUTION 2)

- Supports EM64T CPU

Chipset - Northbridge: Intel

- Southbridge: Intel® ICH7

Memory - Dual Channel DDR2 Memory Technology (see CAUTION 3)

- 4 x DDR2 DIMM slots (see CAUTION 4)

- Support DDR2 800/667 (see CAUTION 5)

- Max. capacity: 4GB (see CAUTION 6)

Hybrid Booster - CPU Frequency Stepless Control (see CAUTION 7)

- ASRock U-COP (see CAUTION 8)

- Boot Failure Guard (B.F.G.)

Expansion Slot - 1 x PCI Express x16 slot

- 2 x PCI Express x1 slots

- 3 x PCI slots

Audio - 5.1 CH Windows

(ALC662 Audio Codec)

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111B/RTL8111C

- Supports Wake-On-LAN

Rear Panel I/O ASRock HD 6CH I/O

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Serial Port: COM1

- 1 x Parallel Port (ECP/EPP Support)

- 6 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port

- HD Audio Jack: Line in/Front Speaker/Microphone

CoreTM 2 Extreme / CoreTM 2 Quad / Core

P31/G31

VistaTM Premium Level HD Audio

Connector - 4 x Serial ATAII 3.0Gb/s connectors (No support for RAID and

“Hot Plug” functions) (see CAUTION 9)

- 1 x ATA100 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x DeskExpress Hot Plug Detection header

- 1 x HDMI_SPDIF header

- CPU/Chassis FAN connector

- 24 pin ATX power connector

- 4 pin 12V power connector

- CD in header

- Front panel audio connector

- 1 x USB 2.0 header (supports 2 USB 2.0 ports) (see CAUTION 10)

BIOS Feature - 4Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- AMBIOS 2.3.1 Support

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version) Hardware - CPU Temperature Sensing Monitor - Chassis Temperature Sensing

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft

Windows® 2000 / XP / XP 64-bit / Vista

VistaTM 64-bit compliant

Certifications - FCC, CE, WHQL

WAR NING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

1. About the setting of “Hyper Threading Technology”, please check page

30.

2. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 26 for details.

3. This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read

the installation guide of memory modules on page 16 for proper

installation.

4. There are memory module installation limitations on this motherboard,

please read “Installation of Memory Modules (DIMM)” on page 16 for

details.

5. Please check the table below for the CPU FSB frequency and its

corresponding memory support frequency.

CPU FSB Frequency Memory Support Frequency

1333 DDR2 667, DDR2 800

1066 DDR2 667, DDR2 800

800 DDR2 667, DDR2 800

6. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows® XP

and Windows

bit with 64-bit CPU, there is no such limitation.

7. Although this motherboard offers stepless control, it is not recom-

mended to perform over-clocking. Frequencies other than the recom-

mended CPU bus frequencies may cause the instability of the system

or damage the CPU.

8. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC

system.

9. Before installing SATAII hard disk to SATAII connector, please read the

“SATAII Hard Disk Setup Guide” on page 25 to adjust your SATAII hard

disk drive to SATAII mode. You can also connect SATA hard disk to SATAII

connector directly.

10. Power Management for USB 2.0 works fine under Microsoft® Windows

VistaTM 64-bit / VistaTM / XP 64-bit / XP SP1 or SP2 / 2000 SP4.

VistaTM. For Windows® XP 64-bit and Windows® VistaTM 64-

1.31.3

Minimum Hardware RMinimum Hardware R

1.3

Minimum Hardware R

1.31.3

Minimum Hardware RMinimum Hardware R

TMTM

VistaVista

Vista

VistaVista

For system integrators and users who purchase this motherboard and

plan to submit Windows® VistaTM Premium 2007 and Basic logo, please

follow below table for minimum hardware requirements.

CPU Celeron 420

Memory 1GB system memory (Premium)

VGA DX9.0 with WDDM Driver

* After June 1, 2007, all Windows

minimum hardware requirements in order to qualify for Windows

2007 logo.

Premium 2007 and Basic Logo Premium 2007 and Basic Logo

Premium 2007 and Basic Logo

Premium 2007 and Basic Logo Premium 2007 and Basic Logo

512MB Single Channel (Basic)

with 128bit VGA memory (Premium)

with 64bit VGA memory (Basic)

equirement Tequirement T

equirement T

equirement Tequirement T

VistaTM systems are required to meet above

able for Wable for W

able for W

able for Wable for W

indowsindows

indows

indowsindows

VistaTM Premium

®®

1.4 Motherboard Layout1.4 Motherboard Layout

1.4 Motherboard Layout

1.4 Motherboard Layout1.4 Motherboard Layout

21.8cm (8.6in)

PS2_USB_PWR1

PS2

Mouse

Keyboard

PARALLEL PORT

ATX12V1

PS2

COM1

CPU_FAN1

Wolfdale

USB2.0 T:USB2 B:USB3

USB2.0

Top:

T: US B0

RJ-45

B:USB1

USB2.0 T:USB4 B:USB5

Bottom:

MICIN

Top:

LINEIN

Center:

FRONT

LAN PHY

AUDIO CODEC

HD_AUDIO1

CD1

Super

I/O

Gigabit LAN

ATXPWR1

PCIE2

PCIE3

HDMI_SPDIF1

FSB1333

Intel

P31/G31

Chipset

FSB2

PCI

EXPRESS

FSB3

FSB1

PCIE1

PCI1

PCI2

PCI3

FLOPPY1

Quad CoreCPU

Yorkfield

RoHS

4Mb

BIOS

IR1

SPEAKER1

DDR2 800

IDE1

DDRII_2(64/72 bit, 240-pin module)

DDRII_4(64/72 bit, 240-pinmodule)

DDRII_1(64/72 bit, 240-pinmodule)

DDRII_3(64/72 bit, 240-pin module)

Dual Channel

4Core1333-GLAN

CMOS

Battery

CLRCMOS1

Intel

USB6_7

ICH7

SATAII_1(Port0)

SATAII_2(Port1)

PLEDPWRBTN

HDLED RESET

1516

SATAII_4(Port3)

SATAII_3(Port2)

SATAII

CHA_FAN1

PANEL1

30.5cm (12.0in)

13 14

1 PS2_USB_PWR1 Jumper 16 SATAII Connector (SATAII_2 (Port1)) 2 ATX 12V Connector (ATX12V1) 17 SATAII Connector (SATAII_1 (Port0)) 3 ATX Power Connector (ATXPWR1) 18 USB 2.0 Header (USB6_7, Blue) 4 775-Pin CPU Socket 19 Flash Memory 5 North Bridge Controller 20 Chassis Speaker Header (SPEAKER 1) 6 CPU Fan Connector (CPU_FAN1) 21 DeskExpress Hot Plug Detection Header 7 2 x 240- p in DD R2 DI MM Sl o ts (IR1)

(Dual Channel A: DDRII_1, DDRII_3; Yellow) 22 Floppy Connector (FLOPPY1)

8 2 x 240-pin DDR2 DIMM Slots 2 3 HDMI_SPDIF Header (HDMI_SPDIF1)

(Dual Channel B: DDRII_2, DDRII_4; Orange) 24 Front Panel Audio Header (HD_AUDIO1) 9 IDE1 Connector (IDE1, Blue) 25 Internal Audio Connector: CD1 (Black) 10 Clear CMOS Jumper (CLRCMOS1) 26 PCI Slots (PCI1 - 3) 11 South Bridge Controller 27 PCI Express x1 Slot (PCIE3) 12 Chassis Fan Connector (CHA_FAN1) 28 PCI Express x1 Slot (PCIE2) 13 SATAII Connector (SATAII_4 (Port3)) 29 PCI Express x16 Slot (PCIE1) 14 SATAII Connector (SATAII_3 (Port2)) 30 FSB2 / FSB3 Jumpers 15 System Panel Header (PANEL1) 31 FSB1 Jumper

1010

1.51.5

1.5

1.51.5

ASRASR

ock HD 6CH I/O Pock HD 6CH I/O P

ASR

ock HD 6CH I/O P

ASRASR

ock HD 6CH I/O Pock HD 6CH I/O P

anelanel

anel

anelanel

1011

1 Parallel Port 7 USB 2.0 Ports (USB01)

2 RJ-45 Port 8 USB 2.0 Ports (USB23)

3 Line In (Light Blue) 9 Serial Port: COM1

4 Front Speaker (Lime) 10 PS/2 Keyboard Port (Purple)

5 Microphone (Pink) 11 PS/2 Mouse Port (Green)

6 USB 2.0 Ports (USB45)

* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming. For Windows® XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system. For Windows

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

VistaTM:

1111

Chapter 2 InstallationChapter 2 Installation

Chapter 2 Installation

Chapter 2 InstallationChapter 2 Installation

4Core1333-GLAN is an ATX form factor (12.0" x 8.6", 30.5 x 21.8 cm) motherboard.

Before you install the motherboard, study the configuration of your chassis to ensure

that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes2.1 Screw Holes

2.1 Screw Holes

2.1 Screw Holes2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the

chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions2.2 Pre-installation Precautions

2.2 Pre-installation Precautions

2.2 Pre-installation Precautions2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity, NEVER

place your motherboard directly on the carpet or the like. Also remember to use

a grounded wrist strap or touch a safety grounded object before you handle

components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

1212

2.3 CPU Installation2.3 CPU Installation

2.3 CPU Installation

2.3 CPU Installation2.3 CPU Installation

For the installation of Intel 775-LAND CPU,

please follow the steps below.

Before you insert the 775-LAND CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear

retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

775-Pin Socket Overview

Step 2. Insert the 775-LAND CPU:

Step 2-1. Hold the CPU by the edges where are

marked with black lines.

Step 2-2. Orient the CPU with IHS (Integrated

Heat Sink) up. Locate Pin1 and the two

orientation key notches.

Pin1

orientation

key notch

775-LAND CPU

orientation

key notch

1313

Pin1

alignment key

black line

775-Pin Socket

black line

alignment key

+ 30 hidden pages

ASRock 4CORE1333-GLAN, 4CORE1333-GLAN R2.0 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual