Ask Proxima DP1200X, C440, DP2300, C450, C410 User Manual

ASK Proxima Lamp Information Guide

C110

C160

C180

C410

C420

Model

Lumens Lamp Life How to Check Lamp Hours How to Reset Lamp Hours

Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 3000 hours,
the lamp will not light (Lamp Error LED will be
Blinking). Press and Hold the "Volume +" and the
"Volume -" buttons simultaneously for ten seconds.
LED on keypad will reset, and you can power the
lamp on.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
then press the "Volume +" button within three
seconds. LED on keypad will reset, and you can
power the lamp on.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
then press the "Volume +" button within three
seconds. LED on keypad will reset, and you can
power the lamp on.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
then press the "Volume +" button within three
seconds. LED on keypad will reset, and you can
power the lamp on.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
then press the "Volume +" button within three
seconds. LED on keypad will reset, and you can
power the lamp on.

1500 3000 Hours

1700 2000 Hours

2200 2000 Hours

2800 2000 Hours

3200 2000 Hours

Press the Menu button and choose About. If the
maximum lamp time of 3000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Copyright InFocus Corp. 1 7/13/2004

C440

C450

DP1000x

DP1200x

3500 2000 Hours

4500 2000 Hours

1100 3000 Hours

1100 2000 Hours

ASK Proxima Lamp Information Guide

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press Menu Button, choose Setup, then choose
Service, then Info. At 2900 hours the Lamp LED lights.

Press the Menu Button, then choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
the "Volume +" button simultaneously for ten
seconds, then release. Power LED on keypad will
reset to green, and you can power the lamp on.

Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
the "Volume +" button simultaneously for ten
seconds, then release. Power LED on keypad will
reset to green, and you can power the lamp on.

Press Menu Button, choose Setup, then choose
Service, then Reset Lamptimer. Press Select button
again to confirm reset. This will turn off the Lamp
LED also.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. If reached 2000
hour life, Press and Hold the "Volume+" button and
then Press the "Volume -" button and hold for ten
seconds to reset.

Press the Menu button and choose About. If the

DP2000s

DP2000x

DP2300
DP2400

Copyright InFocus Corp. 2 7/13/2004

1000 2000 Hours

1300 2000 Hours

45 40 Hours N/A N/A
90 40 Hours N/A N/A

maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. If reached 2000
hour life, must Press and Hold the "Volume+" button
and then Press the "Volume -" button to reset.

Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. If reached 2000
hour life, must Press and Hold the "Volume+" button
and then Press the "Volume -" button to reset.

ASK Proxima Lamp Information Guide

DP2700
DP2710
DP2750B
DP2800
DP2810
DP2900
DP2910

DP4100

DP4100Z

DP4200Z

DP5100

DP5500

90 40 Hours N/A N/A

300 40 Hours N/A N/A

90 40 Hours N/A N/A

90 40 Hours N/A N/A
300 40 Hours N/A N/A
600
600

C: 315, B&W: 1050 400 Hours Press the Menu Button, then choose Advanced.

C: 315, B&W: 1050 400 Hours Press the Menu Button, then choose Advanced.

C: 400, B&W: 1400

300 750 Hours

500 1000 Hours

400 Hours
400 Hours

400 Hours Press the Menu Button, then choose Advanced.

Using the remote control, Press and Hold the "Call"
button for five to ten seconds. The hours used will
appear on the screen.

Press and Hold the "Reset" button on the keypad or the
"Timer" button on the remote for three seconds.

N/A N/A
N/A N/A

Press the Menu Button, choose Advanced, then
choose Lamp Reset.
Press the Menu Button, choose Advanced, then
choose Lamp Reset.
Press the Menu Button, choose Advanced, then
choose Lamp Reset.

Lamp Hours can't be reset. Must keep track of
hours on each lamp manually.

Press and Hold the "Reset" button on the keypad or
"Timer" on the remote control for three seconds, and
the lamp hours used will be displayed. Release
button. While the Lamp Time is being displayed,
press the "Reset" button on the keypad or the
"Menu" button on the remote. Use the Left Arrow
Button on the keypad or the Mouse disk on the
remote to choose "0" on the screen. Press and Hold
the "Reset" button for three seconds. The lamp timer
will be reset.

Press and Hold the "Level +" button on the keypad for

DP5600

DP5610

Copyright InFocus Corp. 3 7/13/2004

500 1000 Hours

500 1000 Hours

40+ seconds. The lamp hours remaining will be
displayed.

Press and Hold the Down Arrow Button for 40+
seconds. The lamp hours remaining will be displayed.

With the projector displaying, press the Reset Switch
on the connection panel with a ball point pen or
paper clip. "RESET" will appear on the screen and
then disappear, resetting the lamp timer.

Press the Menu Button, choose Setting, then choose
Lamp Replace. Select Yes, and confirm again with
Yes.

DP5800

650 2000 Hours

ASK Proxima Lamp Information Guide

Press and Hold the "Reset" button on the keypad or the
"Timer" button on the remote for three seconds. The
lamp hours used will be displayed.

Press and Hold the "Reset" button on the keypad or
"Timer" on the remote control for three seconds, and
the lamp hours used will be displayed. Release
button. While the Lamp Time is being displayed,
press the "Reset" button on the keypad or the
"Menu" button on the remote. Use the Left Arrow
Button on the keypad or the Mouse disk on the
remote to choose "0" on the screen. Press and Hold
the "Reset" button for three seconds. The lamp timer
will be reset.

DP5900

DP5950

DP6150

DP6155

DP6500x

700 2000 Hours

1250 1500 Hours

1400 2000 Hours

2000 2000 Hours

2500 2000 Hours

Press and Hold the Up Arrow Button on the Keypad for
40+ seconds. The displayed Data value will be the
hours remaining on the lamp.
Press and Hold the Up Arrow Button on the Keypad for
40+ seconds. The displayed Data value will be the
hours remaining on the lamp.

Press the Menu Button, then choose Advanced, then
Service. Select Info.

Press the Menu Button, then choose Advanced, then
Service. Select Info.

Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.

Press the Menu Button, choose Setting, then choose
"Lamp Age" and select. You will be asked to confirm
the reset.
Press the Menu Button, choose Setting, then choose
"Lamp Age" and select. You will be asked to confirm
the reset.
Press the Menu Button, choose Advanced, then
choose Service, then Reset Lamp Timer and Press
Select. Note: You must have an active source
connected and displayed on the projector in order to
reset the lamp.
Press the Menu Button, choose Advanced, then
choose Service, then Reset Lamp Timer and Press
Select. Note: You must have an active source
connected and displayed on the projector in order to
reset the lamp.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
then press the "Volume +" button within three
seconds. LED on keypad will reset, and you can
power the lamp on.

Copyright InFocus Corp. 4 7/13/2004