Ask Proxima 700 User Manual

USER GUIDE
CAMPUS 700
Not the actual front page
801.280B USG/700/AE-B
12.05.95
USER GUIDE
CAMPUS 700
USER GUIDE LCD PANEL
USER GUIDE LCD PANEL
TABLE OF CONTENTS
1 INTRODUCTION .................................................................................. 5
2 MAIN FEATURES................................................................................. 5
3 SUPPLIED MATERIAL.......................................................................... 6
4 SETTING UP THE LCD PANEL............................................................ 7
4.1 COMPUTER ......................................................................... 8
4.2 VIDEO.................................................................................. 9
5 USING THE LCD PANEL.....................................................................10
5.1 REMOTE CONTROL...........................................................10
5.2 CONNECTORS...................................................................12
5.3 LOCKING THE PANEL ........................................................12
6 FEATURES..........................................................................................13
7 PRACTICAL HINTS AND TIPS ............................................................16
8 MAINTENANCE...................................................................................18
9 SERVICE.............................................................................................18
10 TECHNICAL DATA ............................................................................19
11 CONNECTORS .................................................................................22
12 FCC STATEMENT.............................................................................24
13 ENVIRONMENTAL STATEMENT.......................................................25
14 SERVICE INFORMATION..................................................................26
15 CONNECTION LAYOUT....................................................................27
(Foldout Page)
USER GUIDE LCD PANEL
This publication is printed on recycled paper.
The information contained in this user guide is preliminary, and the products described
The symbols and are used in this publication to indicate
herein are subject to change without prior notice.
Warning and Note respectively.
USER GUIDE LCD PANEL
1 INTRODUCTION
This LCD data/video panel is a state of the art projection device that can be connected to most computer and video sources.
Applications include presentations, software training, educational use, advertising, information boards and other situations where a small or large audience shares information.
2 MAIN FEATURES
- 16.7 million colors
- Built in Video interface
- Multistandard NTSC/PAL/SECAM
- VGA and MAC compatible
- User settings memorized
- Correct VGA text
- Infrared remote control
- Housing footprint fits OHP glass exactly
- Low weight
- Dual Safecool system
- False light blocking
- 4 meters Y cable
USER GUIDE LCD PANEL
3 SUPPLIED MATERIAL
A complete set includes the following components :
1. LCD Panel 6. Power -5, 12, 5 V
2. Video Cable 7. Power Cable
3. VGA Cable 8. Remote Control
4. Cable-Adapt. MAC mon 9. Batteries
5. Cable-Adapt. MAC comp. 10. Box
11. User Guide
USER GUIDE LCD PANEL
4 SETTING UP THE LCD PANEL
Switch off all equipment before connecting the components. Be aware of static electricity that may build up, especially in the dry season and when operating on synthetic carpets. Discharge any static electricity by touching a metallic surface before you start.
Place the LCD panel on top of a transmissive overhead projector (OHP). Select a high intensity type projector, for instance 400 W halogen or metal­halide. Best results are obtained in a dimmed room with no direct sunlight shining in.
The following are guidelines for first time set-up: Connect the cables and power supply as described in the rear foldout page
(see Connection Layout). Attach power to the LCD panel, turn the overhead projector and computer
on. For more information on set-up see the following sections on Computer and Video.
USER GUIDE LCD PANEL
4.1 COMPUTER
Connect the LCD panel, computer, monitor and power supply as shown in the rear foldout.
Connect cable (2) between the LCD panel and the computer. Use the Y­split on the computer end to connect the monitor.
If you have a Macintosh computer, insert applicable adapters (4) and (5) as shown.
Connect the power supply to the LCD panel (3).
TO SET UP FROM THE REMOTE CONTROL:
STEP OPERATION
1 Press RESET for default settings 2 Adjust TUNE for a stable image. *) 3 Position the image correctly using the four POSITION keys 5 Adjust CONTRAST and BRIGHTNESS as desired
*) If a stable image is not achieved using TUNE, try to adjust the
CONTRAST/BRIGHTNESS setting as described later.
Loading...
+ 20 hidden pages