AW Series
On-Wall
Loudspeaker
Systems.
Perfect for
under-eave
applications
like patios or
balconies, and
of course
indoor BGM.
ur AW series speakers are
O
perfect indoor and outdoors
—anywhere that a project calls for
accurate music reproduction and
intelligible voice
AW’s deliver robust bass, crisp
treble and accurate midrange that
makes them easily heard over table
conversation, traffic or wind noise.
Their range of four sizes from micro
to 8-inch, and sleek ovoid shape let
them fit unobtrusively into any
hospitality decor.
The two larger AW models are
designed for either low-impedance
or constant-voltage applications.
Impressive on their own, their
sound can be further enhanced
with Ashly power amplifiers and
processors that incorporate Protēa
or AquaControl™ software.
❚ Restaurant patios
and interiors
❚ Bars and lounges
❚ Hotel lobbies
❚ Distributed audio in
HoW, schools, sports/
health clubs and public
spaces
❚ Reception areas
❚ Warehouses
DATA
SHEET
on
PAGE THREE
AW Series
This page
intentionally
left blank*.
Wall-Mount Loudspeakers
Page 2 of 4
Data Sheet
begins on the
next page.
*Done so that those fortunate to have printers with
2-sided printing capabilities can print out the Data Sheet
on one sheet of paper.
Page 3 of4
AW Series
AW 2.1P
W Series are made
A
for both indoor and
outdoor wall-mount applications. Dust and water-resistant, they're ideal for BGM use
in bar/restaurants (including
patios), paging and BGM for
retail stores, distributed audio
in HoW, schools, sports/
health clubs and public
spaces.
Highly efficient and
durable, they complete the
total Ashly solution when
combined with Ashly’s DSP
and DSP-enabled amplifiers
for the widest, most
consistent coverage.
The AW Series is available
in four model sizes: AW2.1P
2.5” 8 Ω IP52 rated. AW 3.2P
3” 2-way 8 Ω, IP-52 rated. AW
5.2T 5” 2-way w/transformer,
IP54 rated. AW 8.2T 8” 2-way
w/transformer, IP54 rated. For
extended LF response, add
the SP-12.1P 12” Sub for fullrange applications like DJ or
Live Music Performance.
Two-way models
incorporate Ashly's
proprietary DirectivityOptimized Crossover (DOC).
This gives AW Series speakers
the widest, most consistent
sweet spot.
AW Series can also
benefit from improved linear
frequency response when
used with DSP presets
available for Protea &
AquaControl-enabled amps
and processors.
❚ Wall-mounting hardware
supplied; all models sold
in pairs.
AW 3.2P
Speaker Type Passive, Full-range Passive, 2-Way Passive, 2-Way Passive, 2-Way
Frequency Response 170Hz~19KHz (-10dB)* 100Hz~19KHz (-10dB)* 80Hz~19KHz (-10dB)* 65Hz~19KHz (-10dB)*
Power Handling (RMS) 15W 45W @ 8 Oh ms
Sensiti vity (2.83 V/1 m) 8 4 dB* 85 dB* 87 dB* 89 dB*
Crossover Type N /A Passive Pas sive Passive
Crossover Slope N/A
Crossover Point N /A 2,60 0Hz 2,200Hz 3,200Hz
Directivity Index 6.2dB 6.4 dB 5 .6dB 8.5 dB
Cabinet Material ABS ABS Polypropylene Polypropylene
Environmental IP52 IP52 IP54 IP54
Input Connection
Dimensions (WxHxD) 3.22” x 3.82” x 4.13” 5.5 1” x 7.6 4” x 5.39” 7.32” x 10.23” x 7.04” 10.11” x 14.16” x 10.12”
Supplied Accessories Wall-mount bracket
* With recommended Ashly Protêa or AquaControl™ DSP processing
❚ AW 5.2T and AW 8.2T
have70-100V Constant
Voltage capabilities
❚ Weather resistant (IP52
(AW 2.1P/3.2P) and
Wall-Mount Loudspeakers
FA 125.4
AW 5.2T
AW 8.2T
AW 2.1P AW 3.2P AW 5.2T AW 8.2T
80W @ 8Ω
70V (7.5W/5W/3.75W/2.5W)
100V (15W/10W/7.5W/5W)
Impedance 6Ω 8Ω 8Ω 8Ω
Max SPL TBD TBD TBD TBD
HF – 12 dB/oct
LF – 12 dB/oct
Beam Width 195° H x 205° V 155° H x 135° V 165° H x 160° V 115° H x 105° V
Grille Material ABS + Cloth Steel (painted) Steel (painted) Steel (painted)
Removable 2-pole
Euroblock
HF N /A 1.1” PEI tw eeter 0.75” silk dome twe eter 1” silk dome t weeter
LF 2.75” full-range
Net weight 0.99 lbs 2.53 lbs 5.29 lbs 9.48 lbs
Removable 2-pole
Euroblock
3.5”, 1” voice coil
6.5 oz magnet
Wall-mount Bracket
Safety c able
IP54 (AW 5.2T/8.2T)
❚ 5-Year Warranty
HF – 18 dB/oct
LF – 12 dB/oct
Removable 4-Pole
Euroblock
5.25”, 1” voice coil
8 oz magnet
Wall-mount Bracket
Safety c able
US toll-free +1.585.872.0010
Fax +1.585.872.0739
Sales@Ashly.com • www.Ashly.com
100W @ 8 Ohms
70V (15W/10W/5W/2.5W)
100V (30W/20W/10W/5W)
HF – 12 dB/oct
LF – 12 dB/oct
Removable 4-pole
Euroblock
8”, 1.25” voice coil
15 oz magnet
Wall-mount Bracket
Safety c able
359 mm
186 mm
7.3 in
137 mm
5.4 in
260 mm
10.6 in
258 mm
186 mm
137 mm
186 mm
7.3 in
7.67 in
137 mm
5.4 in
260 mm
10.6 in
359 mm
14.16 in
359 mm
10.12 in
83 mm
105 mm
186 mm
7.3 in
139 mm
5.4 in
138 mm
5.9 in
195 mm
7.67 in
137 mm
5.4 in
260 mm
10.6 in
258 mm
10.11 in
AW Series
100 1k 10k
100
90
80
70
60
Sound pres sure, Lev el [dB]
20 50 200 500 2k 5k 20k
95
85
75
65
100 1k 10k
100
90
80
70
60
Sound pressur e, Level [dB]
20 50 200 500 2k 5k 20k
95
85
75
65
20k
9 dB
9 dB
100 1k 10k
Wall-Mount Loudspeakers
Page 4 of 4
10.12 in
359 mm
14.16 in
7.3 in
260 mm
10.6 in
3.26 in
86 mm
3.85 in
4.13 in
AW
2.1P
5.4 in
AW
5.2T
10.11 in
AW
8.2T
AW speakers will
please you with their
performance and price.
But spec:
■ nXp series multi-mode
amps with Protêa
■ pēma series Protêa-
enabled amps
■ ne4250pe and
ne8250pe network-
Typical 2-way loudspeaker • Off-Axis Response ±30˚
100
95
90
85
80
75
70
Sound pressu re, Level [dB]
65
60
20 50 200 500 2k 5k
enabled amp with
Protêa
■ ne series processors
with Protēa
■ or mXa-1502 mix amp
with AquaControl
… and you get:
❚ Directivity-weighted,
optimized linear
frequency response
❚ Universal crossover
AW with DOC crossover & DSP • Off-Axis Response ±30˚
100
95
90
85
80
75
70
Sound pressur e, Level [dB]
65
60
20 50 200 500 2k 5k 20k
implementation for use
with subwoofer and full-range
speakers
Directivity Optimized Crossover (DOC) passive
*
crossover available on 2-way AW models only
❚ FIR-corrected linear phase
response above about ~300 Hz
On the ne24.24m, only optimized
linear frequency response and
USER MANUAL
universal crossover functions are
available.
AW SERIES
ARCHITECT &
ENGINEERING
SPECIFICATIONS
Tilt/Swivel
Bracket for AW
2.1P & AW 3.2P
139 mm
5.4 in
195 mm
Tilt/Swivel Bracket
for AW 5.2T & AW
8.2T
138 mm
5.9 in
AW
3.2P
in .txt and MS Word .docx format
are available in the
DOWNLOADS section of
http://ashly.com/aw series
AW SERIES
2D AUTOCAD FILES
are available in the
DOWNLOADS section of
http://ashly.com/aw series
Ashly Audio, Inc. • 847 Holt Road • Webster, NY
20 dB
20 dB
100 1k 10k
9 dB
9 dB
100 1k 10k
Or download
the complete
User Manual at
http://ashly.com/wpcontent/uploads/2019/
09/AW_Manual.pdf
USA • US toll-free +1.585.872.0010
Fax +1.585.872.0739 •Sales@Ashly.com
www.ashly.com
Loading...