How it Works
Asber
Loading...
AEMG-24H
Installation Manual
14 pgs895.17 Kb0

Asber AEMG-24H Installation Manual

Ma
nual Instructions
Ma
nual instructions
Manuel
talimatları
Manual de instrucciones
Manuel d’instructions
Bedienungshinweise
Manual do instruções
Ręczny
Obsługa i konserwac
ja
ES EN
DE TK FR PT PL
GRIDDLE RADIANT
AERB-12, AERB-24, AERB-36, AERB-48, AECRB-12, AECRB-24, AECRB-36, AECRB-48
BROILER
HOT PLATE
AEHP-2-12, AEHP-4-24, AEHP-6-36, AEM-G24-B2-36 H, AEM-G12-B4-36
Installation and Operation
Uso y mantenimiento
Installation und Betrieb
Kurulum ve Çalıştırma
Installation et fonctionnement
Instalação e Operação
a
sberprofessional.com
INDEX
ENGLISH
MACHINE INTRODUCTION ................................................................................................................................ 1
1.1 INTRODUCTION TO MACHINE & MODELS .......................................................................................... 1
1.2 IMPORTANT SAFETY INFORMATION .................................................................................................. 1
1.3 SPECIFICATION CHART ....................................................................................................................... 1
INSTALLATION .................................................................................................................................................. 2
2.1 Transport, handling, unpacking, location ........................................................................................... 2
2.2 Manufacturer’s identification label description ................................................................................. 2
2.3 Installation and assembly .................................................................................................................. 3
2.3.1 UNCRATING ............................................................................................................................... 3
2.3.2 INSTALLATION OF LEGS .............................................................................................................. 3
2.4 Gas Connections ................................................................................................................................ 4
2.4.1 MANUAL SHUT OFF VALVE ......................................................................................................... 4
2.4.2 PRESSURE REGULATOR .............................................................................................................. 4
2.4.3 THIS APPLIANCE IS EQUIPPED FOR NATURAL GAS. ..................................................................... 4
2.4.4 PRESSURE REGULATOR CONVERSION ........................................................................................ 5
2.5 Location ............................................................................................................................................ 5
2.6 CLEARANCES ..................................................................................................................................... 6
2.7 AIR SUPPLY & VENTILATION............................................................................................................... 6
OPERATION ...................................................................................................................................................... 7
3.1 General information. ......................................................................................................................... 7
3.2 INITIAL PILOT LIGHTING ..................................................................................................................... 7
3.3 LIGHTING & SHUTDOWN ................................................................................................................... 7
3.3.1 TOP BURNERS ............................................................................................................................ 8
3.3.2 BROILER/GRIDDLE ...................................................................................................................... 8
3.3.3 BEFORE 1st USE (GRIDDLE) ........................................................................................................ 8
MAINTENANCE ................................................................................................................................................. 9
4.1 CLEANING.......................................................................................................................................... 9
4.1.1 DAILY ......................................................................................................................................... 9
4.1.2 STAINLESS STEEL PARTS ............................................................................................................. 9
TROUBLE SHOOTING........................................................................................................................................10
WARRANTY ......................................................................................................................................................11
5.1 Limited Warranty .............................................................................................................................11
a
sberprofessional.com
BTU’S LP AT
ORIFICE
BTU’S NG AT
ORIFICE
MACHINE INTRODUCTION
1.1 INTRODUCTION TO MACHINE & MODELS
All equipment manufactured by ASBER. is for use with the type of gas specified on the rating plate and for installation will be in accordance with National Fuel Gas Code ANSI Z223.1 (latest edition) Instruction to be followed in the event the user smells gas shall be posted in a prominent location. This information shall be obtained by consulting the local gas supplier.
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCES.
This equipment is design engineered for commercial use only
1.2 IMPORTANT SAFETY INFORMATION
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
1.3 SPECIFICATION CHART
MODEL
AEHP-2-12 46,000 56 60,000 49 2 AEHP-4-24 92,000 56 120,000 49 4 AEHP-6-36 138,000 56 180,000 49 6
AEMG-12 23,000 56 23,000 51 1
AEMG-24-H 46,000 56 46,000 51 2
AEMG-24 46,000 56 46,000 51 2
AEMG-36-H 69,000 56 69,000 51 3
AEMG-36 69,000 56 69,000 51 3
AEMG-48-H 92,000 56 92,000 51 4
AERB-12 16,000 57 16,000 53 1 AERB-24 64,000 57 64,000 53 4 AERB-36 96,000 57 96,000 53 6
AERB-48 128,000 57 128,000 53 8 AECRB-12 16,000 57 16,000 53 1 AECRB-24 64,000 57 64,000 53 4 AECRB-36 96,000 57 96,000 53 6 AECRB-48 128,000 57 128,000 53 8
10’’ W.C.
SIZE LP
5’’ W.C.
BURNER RANGE
GRIDDLE
RADIENT BROILER
SIZE NG
BURNERS ALTITUDE
1 asberprofessional.com
a
sberprofessional.com
Model
Serial Number
INSTALLATION
2.1 Transport, handling, unpacking, location.
2.2 Manufacturer’s identification label description.
2.3 Installation and assembly.
2.4 Gas Connections
2.1 Transport, handling, unpacking, location
Upon receiving your new ASBER Equipment, check the package and the machine for any damages that may have occurred during transportation. Visually inspect the exterior of the package. If damaged, open and inspect the contents with the carrier. Any damage should be noted and reported on the delivering carrier’s receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment notify the carrier immediately. Notification should be made verbally as well as in written form. Request an inspection by the shipping company of the damaged equipment. Retain all crating material until inspection has been made. Finally, contact the dealer through which you purchased the unit.
2.2 Manufacturer’s identification label description
Information on this plate includes the model, serial number, BTU / hour input of the burners operating gas pressure in inches WC, and whether the appliance is orifices for natural or propane gas.
When communicating with factory about a unit or requesting for special parts or information, Rating plate data is essential for proper identification.
ASBER COOKING APPLIANCES MUST BE CONNECTED ONLY TO THE TYPE OF GAS IDENTIFIED ON THE RATING PLATE
Gas Type
2 asberprofessional.com
a
sberprofessional.com
2.3 Installation and assembly
SHIPPING DAMAGE CLAIM PROCEDURE
The equipment is inspected and crated by skilled personnel before leaving our factory. The transportation company assumes full responsibility for safe delivery upon acceptance of this equipment. If shipment arrives damaged:
Visible loss or damage: Note on freight bill or express delivery and signed by person making delivery.
File claim for damages immediately: Regardless of extent of damages. Concealed loss or damage: If damage is noticed after unpacking, notify Transportation
Company immediately and file “Concealed Damage “claim with them. This should be done within (15) days from date of delivery made to you. Retain container for inspection.
2.3.1 UNCRATING
Cut and remove the outer packaging. Cut the (4) clamps that hold the equipment to the skid lift the unit off the skid.
2.3.2 INSTALLATION OF LEGS
LEGS ASSEMBLY:
· Mount Legs on bottom of product, the appliance may be further leveled with adjustment in
the foot of the leg.
3 asberprofessional.com
Loading...
+ 9 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use