Artisan ARTPSB2NG Specs
ARTP-SB2 UNIT
14"
12 3/8"
1 3/16"
3"
3/4"
COVER
23 1/4"
21 13/16"
1"
TYPICAL ARTP-SB2 INSTALLATION
COUNTERTOP CUTOUT REQUIREMENTS
NOTE:
A GAS LINE IS REQUIRED INSIDE THE COUNTER FOR
OPERATION. (FOR LP-GAS SETUP SEE NOTE AT RIGHT).
IT IS RECOMMENDED THAT A FLEXIBLE HOSE IS USED FOR
NG-GAS SETUPS TO EASE INSTALLATIONS.
22 3/8"
~ 4 1/4"
4 3/8"
FRONT VIEW
GAS LINE
INLET
REAR VIEW
2 1/4"
11 7/8"
10"
14"
9 1/4"
ELECTRICAL
CORD 8 FT.
NEMA 5-15
90° PLUG
26 1/4"
SHOWN WITHOUT COVER
1 1/8"
GAS LINE
INLET
4 15/16"
REGULATOR
20 13/16"
11 9/16"
12 3/8"
NOTE:
ELECTRICAL POWER IS
REQUIRED UNDER THE COUNTER
(GFCI RECOMMENDED)
SPECIFICATIONS:
BTUH = 30,000
FUEL = NG @ 5' W.C. OR LP @ 10" W.C.
ELECTRICAL POWER = 115 VAC
GAS CONNECTION = 1/2" NPT (NG) OR 3/8" ODF (LP)
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SUPERIOR EQUIPMENT SOLUTIONS
INC. ANY REPRODUCTION IN PART OR AS A WHOLE
TM
WITHOUT WRITTEN PERMISSION FROM SUPERIOR
Artisan
SUPERIOR EQUIPMENT SOLUTIONS
1085 BIXBY DRIVE
CITY OF INDUSTRY, CA. 91745
LAST SAVED BY: »» Adrian «« Thursday, September 13, 2018 10:02:01 AM
EQUIPMENT SOLUTIONS, INC. IS PROHIBITED.
DRAWN BY:
CREATED:
ADRIAN CRISCI
9/13/2018 8:23:05 AM
9 1/4"
BULLNOSE DETAIL
7/8" 7/8"
PROJECT TITLE:
SPEC SHEETS
DRAWING TITLE:
ARTP-SB2 SPECIFICATION SHEET
LP GAS
SETUP:
ADAPTER:
1/2" MPT X 3/8" MPT
NOTE:
STANDARD UNIT HAS A NATURAL GAS (NG)
CONNECTION WITH 1/2" FPT FITTING.
IF LIQUID PROPANE (LP) OPTION IS ORDERED
THE UNIT IS SUPPLIED WITH A REGULATOR,
HOSE AND ADAPTER FITTING AS SHOWN.
14 1/8"
REGULATOR
WITH 36" HOSE
SETBACK EQUAL
TO THE COUNTER
BULLNOSE DEPTH
DRAWING NO.:
ARTP-SB2 SPEC SHEET
SHEET 1 OF 1
Loading...