ARLO AVD1001-100EUS Quick Start Guide
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of
Arlo Technologies, Inc. Other trademarks are for reference purposes.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian French at
arlo.com/docs.)
For regulatory compliance information including the EU Declaration of Conformity, visit
www.arlo.com/about/regulatory/.
Set up your Arlo Video Doorbell
Arlo Technologies Intl. Ltd.
Ground Floor, Building 3
University Technology Center
Curraheen Road, Cork, T12 EF21
Ireland
Arlo Technologies, Inc.
2200 Faraday Avenue, Suite 150
Carlsbad, CA 92008 USA
February 2020
The Arlo Video Doorbell requires a wired doorbell
and chime with voltage between 16 – 24VAC and a
10VA transformer.
If a new transformer is required, we recommend
that you have it installed by a certied electrician.
1. Download the Arlo app and follow the setup
instructions for your Arlo Video Doorbell.
2. Install the Power Kit.
3. Replace your existing doorbell with your Arlo
Video Doorbell.
WARNING: To prevent re and injury,
connect the Arlo Video Doorbell and Power
Kit only to voltage between 16 – 24VAC.
What’s in the box
Tools
• A Phillips screwdriver is required to install the doorbell (not
provided).
• You might also benet from having a drill, a level, and a ladder
(to reach the chime).
Doorbell and plate
(These parts are
attached.)
Release pin
Angled
mounting
plate
Wall screws and anchors
Optional wire extensions, wire
fasteners, and extra screws
Power Kit
Need help?
We are here for you.
Visit www.arlo.com/support for quick answers and resources:
• How-to videos
• Troubleshooting tips
• The Arlo Support phone number for your location
Loading...