FP1200 SERIES
ANALOGUE ADDRESSABLE FIRE PANEL
REFERENCE GUIDE
Revision 4.2: August 1998
Downloaded from: http://www.guardianalarms.net
TABLE OF CONTENTSTABLE OF CONTENTS
1. INTRODUCTION 1
2. PANEL INSTALLATION/ OPERATION 1
3. LCD SCREEN OPERATION 1
4. PROGRAMMING MENUS 2
4.1 GENERAL 2
4.2 FP1200 MENUS 2
4.2.1 Language, Operation and protocol Selection 3
4.2.2 Battery On/Off Selection 4
4.2.3 Battery fault and Earth fault masking 4
1. INTRODUCTION
The purpose of this manual is to provide assistance during installation and commissioning of the
FP1200 Series of analogue Addressable Fire Panels.
The manual should be read in conjunction with the FP2000 Series Analogue Addressable
Fire Panel Reference Guide (Product Code LKFP2503).
Other manuals available are:
1. FP1200 End User Manual MAN-084
2. FP12000 Installation and Commissioning Manual MAN-083
3. FP2000 Reference Guide LKFP2503
2. PANEL INSTALLATION/ OPERATION
For information on the Installation and Operation of the FP1200 Fire Panel refer to the FP1200
End User Manual as well as the FP1200 Installation and Commissioning Manual.
Product Code
3. LCD SCREEN OPERATION
For detail regarding the LCD Screen Operation refer to the FP2000 Reference Guide - Section
3
4. PROGRAMMING MENUS
4.1 GENERAL
For detail regarding Programming Menus on the FP1200 refer to the FP2000 Reference Guide
Section 4. Not all the programming options as listed for the FP2000 are however supported. The
options not supported with reference to the FP2000 reference Guide are as listed below:
Item FP1200 Software Feature Selection FP2000 Ref. Guide
1 Day/Night Mode - selection not Not supported 4.1.49
2 Zone On/Off Mode Not supported 4..1.49
3 Time for Zone On/Off and Day/Night Mode Not supported 4.1.35, 4.1.37
4 ID of Panel is limited to 1/0 or 1/1 4.1.9
5 Networking to other Fire Panels Not supported 4.1.13
6 Networking to Global Repeaters Not supported 4.1.15
7 Access Level setting : Field Access Not supported 4.1.26
4.1.38
8 Zone Graphics Not supported 4.1.40
9
Device Graphics Not supported 4.1.40
4.1.54
4.2 FP1200 MENUS
Not all the Programming Option Menus for the FP1200 are listed in the FP2000
Reference Guide. The Programming Menus not shown in the FP2000 reference Guide
are the following:
1. Language, operation and Protocol selection
2. Battery On/Off Selection
3. Battery and Earth Fault Masking
4.2.1 Language, Operation and protocol Selection
Menu to set Language, Operation and Protocol
(MAIN, 1 (SYSTEM), 1 (CONFIGURATION), 5 (SYSTEM SETUP))
SYSTEM SETUP
Language :English
Operation :EN
Protocol :Apollo
^v, <>, E, X
Alarms:0 Faults:0 Cond.:0 P:1
r Return to Configuration Menu
éé êê Select Language and press üü
éé êê Select Operation and press üü
éé êê Select Protocol and press üü
Language Group 1 Language Group 2 Language Group 3 Language Group 4
English English N/A N/A
Italian Lithuanian
Dutch (Belgium) Polish
French Czech
Dutch Slovakian
German
Portuguese
Spanish
Operation: EN / NEN/ EP
Protocol: Apollo / Aritech
Note: Language group depends on software installed in Fire Panel.
4.2.2 Battery On/Off Selection
Menu to switch battery off.
(MAIN, 5 (MAINTENANCE), 5 (OPTIONS), 4 (BATTERY))
BATTERY
Battery :ON
Alarms:0 Faults:0 Cond.:0 P:1
r Return to Configuration Menu
éé êê Select Battery mode and press üü
Battery: ON / OFF
^v, <>, E, X
4.2.3 Battery fault and Earth fault masking
Menu to mask battery fault and earth fault.
(MAIN, 5 (MAINTENANCE), 5 (OPTIONS), 5 (FAULT MASKS))
FAULT MAKS
Fault :Earth Fault
Mask :en
^v, <>, E, X
Alarms:0 Faults:0 Cond.:0 P:1
r Return to Configuration Menu
éé êê Select Fault and press üü
éé êê Select Mask and press üü
Fault: Battery fault / Earth fault
Mask: EN / DIS
Loading...