4Ch Real time / Triplex / Mux
CCT716
DVR
4 Channel Stand Alone DVR
USB Backup available
CD-WRITER
NETWORKABLE
VGA MONITOR CONNECTION
PTZ CONTROL
User’ Manual VER 1.2
The most stable and reliable real stand alone Digital Video Multiplex Recorder
4Ch Real time/Triplex/Mux - Stand Alone DVR
Installation & Safeguards
INSTALLATION & SAFEGUARDS
All the safety and operating instructions should be read before the unit is operated. Installation
1.To prevent electric shock or other hazards, do not expose units to rain, moisture or dust.
2.Place this unit in a well-ventilated place and do not place heat-generating objects on the unit.
3.This unit should not be located in an area where it is likely to be subjected to vibration.
Before You Start
1.Ensure the power switch is in the OFF position prior to starting.
2.Do not attempt to open or remove the covers. This may expose you to dangerous voltage or other hazards.
3.Installation should be performed by a qualified service person only.
4.This unit should be operated only from the type of power source indicated on the manufacturer’s label and with the power supply included with the unit.
Notice
1. If you need to change the TIME/DATE always clear the HDD. If you don’t follow this step first, it may
cause non recording on the HDD or inhibit the use of menu settings . Even though it may appear to be
recording, you may find you cannot search recorded data.
2.When it comes to HDD capacity, you can use large capacity HDDs.
3.The jumper setting for the CD-RW must be master.
4.When you set the record setup, you have to set the Record Configuration and also Schedule Setup. This unit records as per the Record type & Schedule setup. The default setting value for Schedule setup is Continuous mode.
1
4Ch Real time/Triplex/Mux - Stand Alone DVR |
Contents |
|
Contents
CHAP. 1 |
----------------------------------------------------------------Features & Package Contents |
4 |
1-1. |
Features ---------------------------------------------------------------- |
4 |
1-2. |
Package Contents ---------------------------------------------------------------- |
5 |
|
|
|
CHAP. 2 |
Function of Each Button ---------------------------------------------------------------- |
6 |
|
|
|
2-1. |
Front ---------------------------------------------------------------- |
6 |
2-2. |
Rear ---------------------------------------------------------------- |
7 |
|
|
|
CHAP. 3 |
Installation ---------------------------------------------------------------- |
8 |
3-1. |
Installation Configuration ---------------------------------------------------------------- |
8 |
3-2. |
Detailed Installation ---------------------------------------------------------------- |
9 |
1) |
HDD(Hard Disk Drive) ---------------------------------------------------------------- |
9 |
2) |
Camera ---------------------------------------------------------------- |
9 |
3) |
Monitor ---------------------------------------------------------------- |
10 |
4) |
Power ---------------------------------------------------------------- |
10 |
5) |
Other External Device ---------------------------------------------------------------- |
11 |
6) |
RS-232 ASCII-Code ---------------------------------------------------------------- |
11 |
|
|
|
CHAP. 4 |
Operation ---------------------------------------------------------------- |
12 |
4-1. |
System Log In ---------------------------------------------------------------- |
12 |
4-2. |
Factory Default ---------------------------------------------------------------- |
12 |
4-3. |
Display Configuration ---------------------------------------------------------------- |
13 |
4-4. |
Live View Setup ---------------------------------------------------------------- |
14 |
1) |
Full / Multiple View ---------------------------------------------------------------- |
14 |
2) |
SEQ ---------------------------------------------------------------- |
14 |
3) |
PIP View ---------------------------------------------------------------- |
14 |
4) |
ZOOM View ---------------------------------------------------------------- |
14 |
4-5. |
Record ---------------------------------------------------------------- |
15 |
4-6. |
Playback ---------------------------------------------------------------- |
15 |
4-7. |
Search ---------------------------------------------------------------- |
16 |
4-8. |
PTZ Camera Operation ---------------------------------------------------------------- |
17 |
4-9. |
Data Back-up ---------------------------------------------------------------- |
17 |
|
|
|
2
4Ch Real time/Triplex/Mux - Stand Alone DVR |
Contents |
|
||
|
|
|
|
|
|
|
|
|
|
CHAP. 5 |
Set up ---------------------------------------------------------------- |
18 |
|
|
5-1. |
General Operation ---------------------------------------------------------------- |
18 |
|
|
5-2. |
Display Setup ---------------------------------------------------------------- |
19 |
|
|
1) |
VGA Setup ---------------------------------------------------------------- |
19 |
|
|
2) |
Screen Display Setup ---------------------------------------------------------------- |
19 |
|
|
3) |
OSD Setup ---------------------------------------------------------------- |
20 |
|
|
5-3. |
Record ---------------------------------------------------------------- |
21 |
|
|
1) |
Record Setup ---------------------------------------------------------------- |
21 |
|
|
2) |
Schedule Setup ---------------------------------------------------------------- |
22 |
|
|
5-4. |
Configuration ---------------------------------------------------------------- |
23 |
|
|
1) |
HDD Management ---------------------------------------------------------------- |
23 |
|
|
2) |
Time/Date Setup ---------------------------------------------------------------- |
24 |
|
|
3) |
Camera Setup ---------------------------------------------------------------- |
24 |
|
|
4) |
Motion Setup ---------------------------------------------------------------- |
25 |
|
|
5) |
Interval Setup ---------------------------------------------------------------- |
26 |
|
|
6) |
Alarm Setup ---------------------------------------------------------------- |
26 |
|
|
7) |
Password Setup ---------------------------------------------------------------- |
26 |
|
|
5-5. |
External Device Setup ---------------------------------------------------------------- |
27 |
|
|
1) |
TCP/IP Setup ---------------------------------------------------------------- |
27 |
|
|
2) |
Pan Tilt Zoom Setup ---------------------------------------------------------------- |
28 |
|
|
3) |
Spot Setup ---------------------------------------------------------------- |
28 |
|
|
5-6. |
Back up ---------------------------------------------------------------- |
29 |
|
|
1) |
CDR Setup ---------------------------------------------------------------- |
29 |
|
|
2) |
USB Setup ---------------------------------------------------------------- |
29 |
|
|
5-7. |
Firmware Upgrade ---------------------------------------------------------------- |
30 |
|
|
|
|
|
|
|
CHAP. 6 |
Network Setup ---------------------------------------------------------------- |
31 |
|
|
6-1. |
Network Configuration ---------------------------------------------------------------- |
31 |
|
|
6-2. |
Remote Viewer Program ---------------------------------------------------------------- |
32 |
|
|
6-3. |
Backup CD Player ---------------------------------------------------------------- |
37 |
|
|
|
|
|
|
|
CHAP. 7 |
Web Viewer Setup ---------------------------------------------------------------- |
39 |
|
|
7-1. |
Web Viewer ---------------------------------------------------------------- |
39 |
|
|
7-2. |
Web Backup Player ---------------------------------------------------------------- |
40 |
|
|
CHAP. 8 |
Specifications ---------------------------------------------------------------- |
42 |
|
|
8.1. |
Specifications ---------------------------------------------------------------- |
42 |
|
|
8.2 |
Record Timetable ---------------------------------------------------------------- |
43 |
|
|
3
4Ch Real time/Triplex/Mux - Stand Alone DVR CHAP 1. Features & Package Contents
CHAP 1. Features & Package Contents
1-1. Features
Live Display
Real time display per camera
Auto Sequence
PIP (Picture in picture)
Digital Zoom
Simple playback mode
Simple PTZ camera control
Record
Variable Record resolution (For higher picture quality or higher recording speed) Efficient Image Quality setting in 5 steps
Schedule recording
Event Record by alarm and motion detection
Network
Monitoring and Search using Remote Viewer via network
Playback
Search and playback by recorded data size and date/time
Various steps in forward playback speed (X2, X4, X8, X16, X32 fast playback. 1/16, 1/8 ,1/4, 1/2 slow playback)
Various steps in backward playback speed (X2, X4, X8, X16, X32 fast playback. 1/16, 1/8, 1/4, 1/2 slow playback)
Data backup
Simple backup using CD-RW
Remote viewer backup in AVI and JPEG file formats
Supports large capacity Hard Drives
USB Back-Up Device
Others
Supports UNI-CODE
Supports SPOT Monitor
PAL/NTSC Auto detection
4
4Ch Real time/Triplex/Mux - Stand Alone DVR |
CHAP 1. Features & Package Contents |
|
|
|
|
1-2. Package Contents
DIG IT A L V ID E O R E C O R D E R
US B
P O WE R
HD D A C T IV E
1. DVR Main Unit
2. Power Cable
|
3. Power Adapter |
|
5. Software CD |
||
|
|
|
|||
|
|
|
4. User’s Manual |
|
|
6. Rubber Pad |
7. HDD absorber |
8. Bolts |
9. Mouse |
||
|
Package Contents |
|
Description |
|
|
1. |
DVR Main Unit |
|
Stand-Alone Digital Video Recorder |
|
|
2. |
Power Cable |
|
AC power supply to adapters for 12V DC power |
|
|
3. |
Power Adapter |
|
DC power supply |
|
|
4. |
User’s Manual |
|
User’s Manual |
|
|
5. |
Software CD |
|
Remote Viewer Software & Backup CD Player |
|
|
6. |
Rubber Pad |
|
Prevent DVR from slipping. Attach it to the bottom of main unit |
||
7. |
HDD absorber |
|
Absorbing the mechanical shock of HDD against the case bottom |
||
8. |
Bolts |
|
Bolts for fixing HDD |
|
|
9. |
Mouse |
|
A mouse controlling all functions of DVR |
|
5
4Ch Real time/Triplex/Mux - Stand Alone DVR |
CHAP 2. Function of Each Button |
|
CHAP 2. Function of Each Button
2-1. Front
1 |
2 |
3 |
4 |
||
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Name |
Function |
|
|
1. USB Device |
Used for updating Firmware |
|
|
2. USB HOST |
Used for Data Backup |
|
|
3. LED Lamps |
Shows status of operation |
|
|
4. CD –RW |
Used for Data Backup and Firmware upgrade |
|
|
6
4Ch Real time/Triplex/Mux - Stand Alone DVR |
CHAP 2. Function of Each Button |
|
|
|
|
2-2. Rear
9 |
4 |
5 |
C H 1 |
C H2 MO NIT O R |
FUNCTION |
CA UTIO N |
1 |
AL ARM D1 |
|
|
2 |
AL ARM D2 |
|
||
RIS K O F E L ECT RIC |
V G A |
|||
S HO CK . DO NO T O P EN ! |
3 |
AL ARM D3 |
||
|
||||
CAUTION : T O REDUCE T HE RIS K OF EL E CT RICAL S HOCK . DO NOT OP E N COVE RS . |
4 |
AL ARM D4 |
|
|
NO USE R S E RVICEABLE PARTS INS IDE.RE F ER S ERVICING T O QUAL IFIE D |
5 |
G ND |
|
|
SE RVICE P E RSO NNE L . |
6 |
RELAY NC |
|
|
|
|
|||
|
7 |
RELAY CO M |
|
|
WARNNIG : T O P REVE NT F IRE OR SHOCK HAZ ARD. DO NOT EXP OS E UNITS NOT |
9 |
RS 48 5 D- |
RS - 232C |
|
SP E CIF ICAL L Y DES IGNE D F OR OUTDOOR USE TO RAIN OR MOIS TURE. |
||||
8 |
RS 48 5 D+ |
|
E T HE RNE T C H 3 C H 4 S P O T P S /2 DC 12V
1 2 3 6 7 8
|
Name |
Function |
|
|
|
1 |
RS 485 |
Connection with PTZ camera or other external device using RS 485 |
|
|
interface |
|
|
|
|
RELAY Output |
Relay out terminal |
|
|
|
|
SENSOR Input |
Sensor input terminal |
|
|
|
2 |
RS-232C |
Connection to allow control by PC (Not supported) |
|
|
|
3 |
ETHERNET |
Connection to ETHERNET device |
|
|
|
4 |
CAMERA Input |
Connection with camera (NTSC / PAL) |
|
|
|
5 |
MONITOR |
Connection with Composite Monitor (NTSC / PAL) |
|
Output |
|
|
|
|
6 |
SPOT Monitor |
Connection with Composite Monitor (NTSC / PAL) |
|
Output |
|
|
|
|
7 |
PS/2 |
Connection with PS/2 MOUSE |
|
|
|
8 |
DC Power |
DC over 12V adapter |
|
|
|
9 |
VGA |
Connection to VGA Monitor (CRT type or TFT LCD monitor) |
|
|
|
7
4Ch Real time/Triplex/Mux - Stand Alone DVR
CHAP. 3 Installation
CHAP.3 Installation
3-1. Installation Configuration
8
4Ch Real time/Triplex/Mux - Stand Alone DVR
CHAP. 3 Installation
3-2. Detailed Installation
1) HDD
MA IN B OA R D |
|
H D D1 |
|
(M A S TE R ) |
C D - R W |
|
|
|
(MA S TE R ) |
1.Connect Main Board and HDD1 using IDE cable and HDD power cable.
2.The jumper setting of HDD should be on Master when you install HDD.
3.Stick the HDD absorber (included in package) on the bottom of case and then install the HDD on top of them by using the bolts (included in package).
4.Screws must be inserted from outside of the case bottom.
2)Camera
C H1 |
C H 2 MO NIT O R |
|
|
|
|
|
|
|
|
C H3 |
C H 4 |
S P O T |
P S /2 |
DC 12V |
|
DC |
|
LE V E L |
|
V .P |
VIDEO |
|
|
DC |
|
V IDE O |
LENS |
AC24V /DC12 |
Rear view of CAMERA
Connect camera to the camera input on rear panel of DVR marked CAMERA IN.
9
4Ch Real time/Triplex/Mux - Stand Alone DVR
CHAP. 3 Installation
3) Monitor
C H1 |
C H 2 MO NITO R |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C H3 |
C H 4 |
S P O T |
P S /2 |
DC 12V |
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
V IDE O A |
|
V IDE O B |
V IDE O C |
|
|||||||
|
IN |
|
OUT |
|
IN |
|
OUT |
IN |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect the video output marked MONITOR to Video-In of Main monitor.
4) Power
C H1 |
C H 2 MO NITO R |
|
|
|
|
|
|
|
|
C H3 |
C H 4 |
S P O T |
P S /2 |
DC 12V |
||
|
|
|
|
|
|
|
12V DC power adapter
10
4Ch Real time/Triplex/Mux - Stand Alone DVR
CHAP. 3 Installation
5) Other External Device
PAN/TILT CAMERA
FUNCTION |
1ALARM D 1
2ALARM D 2
3ALARM D 3
4ALARM D 4
5G ND
6RELAY NC
7RELAY CO M
8RS 485 D+
9RS 485 D-
PC
RS - 232 C
FUNC T IO N |
E T HE RNE T |
PTZ
CAMERA
SENSOR SIREN
1.ALARM 01
2.ALARM 02
3.ALARM 03
4.ALARM 04
5.GROUND
6.RELAY NC
RS-485 : Control external device like PTZ camera. (Pin No.8 & No.9 at D-SUB).
RELAY Output : Relay Output (Pin No.6 & No.7 at D-SUB).
SENSOR Input : Sensor Input –Alarm Input (Pin No.1 ~ No.4 at D-SUB). ETHERNET : Connection to LAN, WAN t.
7. |
RELAY COM |
5 |
4 |
3 |
2 |
1 |
||
8. |
RS485D + |
|
|
|||||
|
|
|
9 |
8 |
7 6 |
|||
|
|
|||||||
|
|
|
|
|
9.RS485D -
6)RS-232C ASCII-code
Following ASCII-Codes (Hexa-Code) are for programmers who want to control DVR unit via the RS232C Port using keyboard of PC. ASCII-Code is 1 Byte.
|
‘R’ |
DOWN |
‘J’ |
PTZ |
‘T’ |
CH1 |
‘1’ |
STOP |
‘S’ |
LEFT |
‘H’ |
ZOOM |
‘Z’ |
CH2 |
‘2’ |
|
|
|
|
|
|
|
|
|
‘P’ |
RIGHT |
‘K’ |
FRZ |
‘F’ |
CH3 |
‘3’ |
|
|
|
|
|
|
|
|
Pause |
‘A’ |
NEXT |
‘N’ |
MODE |
‘D’ |
CH4 |
‘4’ |
|
|
|
|
|
|
|
|
SERCH |
‘E’ |
ENTER |
0x0d |
PIP |
‘I’ |
|
|
|
|
|
|
|
|
|
|
MENU |
‘M’ |
- |
<‘ |
SEQ |
‘Q’ |
|
|
|
|
|
|
|
|
|
|
UP |
‘U’ |
+ |
‘>’ |
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: Whilst RS-232C is available this is not supported for technical advice.
11
4Ch Real time/Triplex/Mux - Stand Alone DVR
CHAP. 4 Operation
4-1. System Log-In
1)Move a cursor to lower right hand corner of display by using a mouse, then you will see ‘Menu’Icon. Click the ‘Menu’Icon to log in.
2)Then, you will see ‘DVR Log-In’message shown right.
3)You may log in as a ADMIN, MANAGER, or USER1 ~ USER8.
4)Input your password (Max. 8 digits are available for password)
5)To exit, click ‘EXIT’button.
DVR LOG-IN
USER ID |
|
|
|
|
|
|
|
|
|
|
|
|
|
ADMIN |
||||||
USER PW |
|
|
|
|
|
|
|
|
|
|
|
|
________ |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 |
|
1 |
|
2 |
|
3 |
|
4 |
|
5 |
|
6 |
|
7 |
|
8 |
|
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENTER |
|
|
|
|
|
|
EXIT |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If the password entered matches previously set password, you can log into ‘MAIN MENU’.If an incorrect password is entered, you will see “PW IS NOT CORRECT”message on display. The factory default password is none. Just click [ENTER] for first time initial log in.
-Factory default password ADMIN : (Blank)
For security reasons, be sure to make note of your own password.
4-2. Factory Default
Before first operation, you must check out each channel is displaying properly and log in ‘Main Menu’and set Time/Date and set HDD clear.
1. HDD Management
HDD MANAGEMENT |
|
|
CAMERA SETUP |
|
MODEL |
MOTION SETUP |
|
SERIAL |
ALARM SETUP |
|
BLOCKS |
INTERVAL SETUP |
|
SIZE |
TIME/DATE SETUP |
|
SPEED |
PASSWORD SETUP |
|
--------------- |
|
|
OVERWRITE |
|
||
|
|
CLEAR ESC |
|
|
|
12
4Ch Real time/Triplex/Mux - Stand Alone DVR
CHAP. 4 Operation
4-3. Display Configuration
|
ETHERNET Status |
HDD Status |
||||
|
|
|
|
|
connected |
|
|
|
|
|
|
In Live Mode: |
|
|
|
|
|
|
Disconnected |
|
|
|
|
|
|
Remote Search |
Amount of Recorded data |
|
|
|
|
|
|
In Playback Mode: |
|
|
|
|
|
|
Amount of data displayed |
Current Date/ Time |
2005 |
|
/07 / 21 |
22 : 05: 18 |
|
|
Camera Title |
|
CAM01 |
CAM02 |
|
||
|
|
CAM03 |
CAM04 |
PLAY |
||
|
|
|
|
|
|
SEARCH |
Alarm Record |
|
|
|
|
|
SEQUENCE |
|
|
|
|
|
|
|
Motion Record |
|
|
|
|
|
ZOOM |
Continuous Record |
1 |
2 |
3 |
4 |
PTZ |
PIP |
|
|
|
|
|
PTZ |
|
|
|
|
|
|
P TZ |
|
|
|
|
|
|
|
MENU |
Live Display
2005 |
|
/07 / 21 |
22 : 05: 18 |
1X |
|
|
CAM01 |
|
CAM02 |
||
|
CAM03 |
|
CAM04 |
||
1 |
2 |
3 |
4 |
|
|
Playback Display
HDD Status
In Playback Mode:
Amount of data displayed
Status of DVR
Forward Playback
Backward Playback
Pause
1/4~1/2 Times slow Playback
1/4~1/2 Times slow backward
Playback speed up Playback speed down
SEARCH
STOP
13