Argos MC6809 ASSEMBLY INSTRUCTIONS
Components
1 x Table Top
A
1 x Bottom Panel
B
D
2 x Side Panel
2 x Base Side Panel
E
Cube Coffee Table
Simple Assembly Instructions - Please keep for future reference
2 x Base Panel
C
Fittings
4 x Screw
A
B
D
4 x Locking Nut
26 x Dowel
E
C
1 x Glue
4 x Locking Pin
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
3-07
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
Assembly Instructions
Assembly Instructions
Stage 2 – Fitting the Side PanelsStage 1 – Fitting the Base
CAUTION: Always check
the assembly method is correct
before applying Glue.
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Place a small amount of Glue E
into the dowel holes. Insert
Dowels B into the Base Side
Panels E.
See fig. 1.
2. Place a small amount of Glue E
into the dowel holes and onto
the joints' surfaces. Fix the Base
Panels C onto the Base Side
Panels E.
See fig. 2.
NOTE: Ensure the top fixing holes
are aligned and face upwards
on the side panels before
assembly.
B
fig. 1
E
B
E
E
NOTE: It would be useful to ask
someone to help you at this
stage.
B
1. Place a small amount of Glue E
E
E
2. Place a small amount of Glue E
C
fig. 2
NOTE: Ensure the screw holes on
CAUTION: Always check
the assembly method is correct
before applying Glue.
fig. 4
into the dowel holes. Insert Dowels
B into the Side Panels D.
See fig. 4.
into the dowel holes and onto
the joints' surfaces. Fix the Side
Panels D onto the unit.
See fig. 5.
fig. 5
the Side Panels are facing
inwards.
B
E
D
B
D
E
3. Place a small amount of Glue E
into the dowel holes and onto
the joints' surfaces. Use Dowels
B to fix the Bottom Panel B onto
the unit.
See fig. 3.
3. Use Screws A to fix the Side
B
fig. 3
E
Panels B onto the unit.
See fig. 6.
fig. 6
A
A
Assembly Instructions
Assembly Instructions
Stage 4 – Finishing the UnitStage 3 – Fitting the Table Top
CAUTION: Always check
the assembly method is correct
before applying Glue.
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Screw in Locking Pins C into the
Table Top A.
See fig. 7.
2. Place a small amount of Glue E
into the dowel holes and onto the
joints' surfaces. Carefully locate
the Table Top A onto the unit.
See fig. 8.
NOTE: It would be useful to ask
someone to help you at this
C
C
A
fig. 7
A
E
stage.
1. Use Locking Nuts D to fix the
Table Top A onto the unit.
See fig. 9.
2. Carefully place the unit in the
desired location.
See fig. 10.
NOTE: Before use make sure the
unit is secure. Allow Glue to
dry for 24 hours or be
completely dry before use.
D
fig. 9
fig. 10
Care and Maintenance
fig. 8
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
Fitting
From time to time please ensure there are no loose screws on the product.
Loading...