Argos 1597354, 1718786 ASSEMBLY INSTRUCTIONS

Penton - Coffee Table

AssemblyInstructions - Please keep for future reference

609/7134

609/7141

Dimensions

Width-107cm

Depth-60cm

Height-46cm

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800

Issue 1 - 17/10/12

SafetyandCareAdvice

Important – Please read these instructions fully before starting assembly

Check you have all the
components and tools listed on
pages 2 and 3.

Remove all fittings from the
plastic bags and separate them
into their groups.

Keep children and animals
away from the work area, small
parts could choke if swallowed.

Make sure you have enough
space to layout the parts before
starting.

Do not stand or put weight on
the product, this could cause
damage.

Assemble the item as close
to its final position (in the same
room) as possible.

Assemble on a soft level
surface to avoid damaging the
unit or your floor.

This product has been produced
from natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.

The product has been treated
with a wax and oil finish to
prevent dirt ingress and preserve
moisture.

On unpacking the
furniture you may notice an
odour due to this treatment;
this will disappear once the
furniture is unpacked and
assembled after a period of time.

This process may leave some
staining on the packaging
material; please take care to
ensure this does not transfer
to clothing or carpeted surfaces
during assembly.

We do not
recommend the
use of power
drill/drivers

inserting screws,

as this could damage the unit.
Only use hand screwdrivers.

Parts of the assembly will be

easier with 2 people.

Dispose of all packaging

carefully and responsibly.

for

Careandmaintenance

Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.

Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.

From time to time check
that there are no loose
screws on this unit.

This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.

1

Components - Panels

Please check you have all the panels listed below

Top panel (107 x 60cm)

1

Base panel (101.2 x 54.2cm)

2

Front panel x 2 (44 x 103.2cm)

3

Side panel x 2 (44 x 58cm)

4

2

If you have damaged or missing components,

Components - Fittings

call the

CustomerHelpline: 08456400800

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.

A B C

Wooden dowel x 8

Toolsrequired

35mm Screw x 8

Phillips screwdriver
(medium)

50mm Screw x 8

m

2

Ruler/tape
measure

Small
hammer

Ruler - Use this ruler to help correctly identify the screws

5

0

10 15 20 25 30 35 40

3

55

45

50

60 65 70

75

80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

Eye protection
(when using a
hammer or glue)

Assembly Instructions

Step 1

Insert dowels into
base panel and side
panels .

4

Step 2

A

2

A

2x

A

2

4

A

Fixing base panel.

Two people are required
for an easier assembly.

With help, fit base panel

2

to side panels then

fix it using screws .

4

B

Step 3

Caution:

Carefully lay the
top panel on a soft and
clean surface to avoid
damaging the product.

4

B

4

B

2

2

B

Place sides properly

4

ensuring dowels are all
fitted into their holes on
top panel .

1

1

4

Assembly Instructions

Step 4

Inserting front panels.

Two people are required
for an easier assembly.

Insert front panels in

3

the grooves on side
panels.

Attention:

Note correct

position of the panels.

Attention!

3

3

4

4

Attention!

3

3

4

Step 4

Step 5

Fixingtoppanel.

Fix assembled frame to
the top panel using
screws .

C

Attention:

Do not over
tighten screws.

C

C

C

C

5

Assembly Instructions

Step 6

a: Fix base panel to the

front panels using
screws .

3

B

a:

B

B

B

b: With help, carefully

stand the product upright.

Assembly is complete.

b:

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800

6