Argos 1597157 ASSEMBLY INSTRUCTIONS

Haversham - 2 Drawer Coffee Table

Assembly Instructions

- Please keep for future reference

159/7127

Dimensions

Width - 105cm

Depth - 55cm

Height - 45cm

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400 800

Issue 1 - 18/10/13

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

Check you have all the components and tools listed on pages 2 and 3.

Remove all fittings from the plastic bags and separate them into their groups.

Keep children and animals away from the work area, small parts could choke if swallowed.

Make sure you have enough space to layout the parts before starting.

Assemble on a soft level surface to avoid damaging the unit or your floor.

Care and maintenance

This product contain Natural timber; you may notice some variation in the grain and colour of different component parts which is normal for furniture produced using natural wood and is not the result of any manufacturing fault.

Do not stand or put weight on the product, this could cause damage.

Assemble the item as close to its final position (in the same room) as possible.

recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers.

Parts of the assembly will be

easier with 2 people.

Dispose of all packaging

carefully and responsibly.

We do not

Use an appropriate furniture polish for natural wood furniture and a dry cloth to clean the product.

Avoid placing the furniture in

direct sunlight as this will cause the timber to prematurely age.

From time to time check

that there are no loose screws on this unit.

This product should not be discarded with household waste. Take to your local authority waste disposal centre.

Note: if required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.

Components - Panels

Please check you have all the panels listed below

Right front leg (43,2 x 4,5cm)

Right back leg (43,2 x 4,5cm)

Top panel (105 x 55cm)

Left front leg (43,2 x 4,5cm)

Left back leg (43,2 x 4,5cm)

Back panel (94 x 18,3cm)

Shelf (94 x 52cm)

Drawer right side X2 (45 x 13cm)

Side panel X2 (44 x 18,3cm)

Drawer front (46,5 x 18cm)

Middle wall (49,6 x 18,3cm)

Drawer left side X2 (45 x 13cm)

Large runner X2 (49,6 x 4,7cm)

Drawer back X2 (41 x 13cm)

Drawer bottom X2 (44,8 x 42,2cm)

Runner X2 (49,6 x 1,8cm)

If you have damaged or missing components,

Components - Fittings

call the Customer Helpline: 08456 400 800

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

8,0 x 30mm Wooden dowel

Foot pad X 4

X 43

3,5 x 25mm Screw X 06

Handle X 2

3,5 x 30mm Screw X 54

Plastic pin X 4

Tools required

Phillips screwdriver (medium & large)

Small hammer

Ruler - Use this ruler to help correctly identify the screws

10 15 20 25 30 35 40

60 65 70

80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

Ruler/tape measure

Eye protection (when using a hammer or glue)

+ 7 hidden pages