Arcam SR250 User Manual
SR250
2-channel Receiver
• 2-channel high-end audiophile AVR
• 4K (UHD) HDMI2.0a with HDCP2.2
• 7 HDMI inputs, 3 HDMI outputs, ARC compatible
• Dirac Live® for Arcam room correction
• Spotify® Connect enabled
• Class G power amplification
• Cirrus CS42528 audiophile DAC
• Ethernet, RS232 and IR control
• Free MusicLife iOS UPnP and control app
As one of the very few audio specialists in the world to design
AV receivers, Arcam has developed a reputation for balancing
a nely honed technical specication with world class audio
performance. The SR250, quite simply, one of the highest
performing AV receivers Arcam has ever made.
There are many music lovers who want an amplier that
sounds as good as the best separates in stereo but also want
all the connectivity and exibility that a networked modern
AVR delivers. We are proud to announce the SR250 our rst 2
channel high performance AVR.
“The connectivity of a
fully-featured AVR with
the simplicity of a
stereo amplifier.”
Scott Campbell - Sales Director, Arcam
Offering a level of sound quality that is far above competing
receivers, this AVR is an audiophile product by any measure.
The SR250 delivers stunning realism with everything from
heavy-weight blockbusters to your favourite concert video.
Further enhancing the performance of the new SR250, Arcam
has also included the very latest room correcting technology
from Dirac Research. Dirac Live® for Arcam gives the dealer
the ability to tune the acoustic performance of the system
to any room situation giving the listener the best possible
experience in their own home.
Both video and audio stages are designed to embrace both
current and upcoming technologies. HDMI2.0a with HDCP2.2
4K “Ultra HD” and 3D video capability are built in.
An internal tuner provides a fully integrated FM / DAB / DAB+
(in appropriate markets) radio solution. Worldwide access
to internet radio stations is provided through the network
connection, which also interfaces to UPnP audio servers. The
USB port supports memory devices.
Control is possible via Ethernet, enabling it to be fully
integrated with whole house control systems, or via the iOS
MusicLife UPnP/control app. RS232, 12V triggers and standard
IR control are also included.
The SR250 is designed in the UK.
Available
Now
Arcam, The West Wing, Stirling House, Waterbeach,
Cambridge CB25 9PB, UK. www.arcam.co.uk
Preliminary information only. Arcam has a policy of
continuous improvement; we reserve the right to
change features without notice. E&OE 2016
Arcam is a trademark of A&R Cambridge Ltd. All other
trademarks are the property of their respective owners
SR250
Continuous power output, per channel, 8Ω
2-channel Receiver
2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W
2 channels driven, 1kHz, 0.2% THD - 120W
Residual noise & hum (A-wtd) - <0.15mV
Audio Performance (Stereo line inputs)
Signal/noise ratio (A-wtd, stereo direct) - 110dB
Frequency response - 20Hz—20kHz ± 0.2dB
Video Inputs
HDMI - x7 (6 x HDMI2.0a, HDCP2.2, 1 x MHL compatible)
Video Outputs
HDMI - Z1 x2 (out1 ARC, HDMI2.0a, HDCP2.2, out 2
HDMI2.0a, HDCP2.2), Z2 x1 (HDMI2.0a, HDCP2.2)
Audio Inputs
Radio Tuner
FM / DAB / DAB+ (in appropriate markets)
General
12V Trigger x2
IR in x2
6V rSeries PSU x1
Power consumption (max) - 600W (approx. 2040
BTU/hour)
Power consumption (standby) - <0.5W
Dimensions & Weights
W x D (inc. speaker terminals) x H (inc. feet) - 433 x
425 x 171mm
Weight (net) - 15.1kg
Weight (packed) - 18.5kg
HDMI - x7, Coax SPDIF - x4, Toslink - x2, RCA Phono - x6,
3.5mm aux, USB input, Ethernet Client, Internet Radio, ARC
(from display)
Audio Outputs
2.1 Pre-amp output - 4x RCA Phono
Zone 2 output - RCA Phono
EAN/UPC code
5 060133 602538
AUDIO
™
Loading...