Arc AAS6SE3, CP6BLS, CF6BLS, CG6BLS, AAG6SE1 User Manual
...
600mm & 900mm
Canopy Rangehoods
600mm Models: AAS6SE3 pyramid / s/steel
CP6BLS pyramid / s/steel
CF6BLS flat / s/steel
CG6BLS curved glass & s/steel
AAG6SE1 curved glass & s/steel
RFT6 flat / s/steel
RGT6 curved glass & s/steel
900mm Models: AAS9SE3 pyramid / s/steel
CP9BLS pyramid / s/steel
CP9BLB pyramid / black
CF9BLS flat / s/steel
IAF9SE3 flat / s/steel
CG9BLS curved glass & s/steel
AAG9SE3 curved glass & s/steel
RFT9 flat / s/steel
RGT9 curved glass & s/steel
distributors of
INSTALLATION AND OPERATION MANUAL
Dear Customer,
We thank you for choosing this quality appliance and hope you enjoy many years of
reliable service.
Please ensure this manual is read carefully before installation and use. Keep this
manual in a safe and accessible location should future reference be required.
Regards
Home Appliances
CONTENT
2 …………………………………………………. Notice
3 …………………………………………………. Caution
4 …………………………………………………. Feature
5-8 ……………………………………………….. Installation
9 ………………………………………………….. Notice of installation
10 ……………………………………………..….. Safety Warning
11-16 …………………………………………..… Use
17 ………………………………………………… Maintenance
18 ………………………………………………… Light Replacing
19 ………………………………………………… Abnormity and Solution
CanopyInstallationandOperationManual
NOTICE
1. Thank you for choosing our canopy rangehood. Please read the instruction
manual carefully before use.
2. The installation work must be undertaken by a qualified and competent fitter.
3. The manufacturer disclaims all liability for any damage or injury caused as a
result of not following instructions for installation contained in the following
text.
The cooker hood is used on 220/240v, 50Hz.
Home Appliances – October 2013
1
CanopyInstallationandOperationManual
SAFETY WARNINGS
Installation of this Integrated Canopy Rangehood must be carried by a
qualified and competent installer.
The manufacturer disclaims and liability for any damage or injury caused as a
result of not following instruction of installation contained in this instruction
manual.
This Integrated Canopy Rangehood is not intended for use by young children
or infirm persons without supervison.
Young children should be supervised to ensure they do not play with this
Integrated Canopy Rangehood.
To avoid possible electric shock this Integrated Canopy Rangehood should be
unplugged before any maintenance or cleaning is carried out.
This Integrated Canopy Rangehood cannot be installed in an external
environment.
The Grease Filters should be cleaned at least once a month to avoid the risk
of fire.
Flambe cooking cannot be carried out under the Integrated Canopy
Rangehood and is not recommended for use over Barbeques.
Ducting must be independent from any other form of ducting of other
household heating sources.
Ducting into wall cavities is prohibited unless the cavity has been designed for
this purpose
Lit gas burner should never remain uncovered or on when there is no pan
present due to the risk of fire.
Adequate ventilation of the room is required when the cooker hood is used at
the same time as appliances burning gas or other fuels.
- CAUTION: Accessible parts may become hot when used with cooking appliances.
Home Appliances – October 2013
2
CanopyInstallationandOperationManual
(2) FEATURE
1. The cooker hood uses high quality materials, and is made with a streamlined
design.
2. Equipped with a large power low noise electric motor and centrifugal leaf, it
produces strong suction, low noise, non stick grease filter and easy to clean.
3. With the isolated low voltage circuit board control, 12vAC input, the lights are
therefore safer.
4. Special wind tunnel construction and oil collector design, free dirt will be
absorbed in a second.
Home Appliances – October 2013
3
CanopyInstallationandOperationManual
(3). Installation
If the model without Glass:
3.1 The cooker hood shall be placed at a
distance of 65-75cm (26-30inch) from the
cooking surface. See Pic 1.
3.2 Install the hook on a suitable place once the
installation height is fixed, and keep it in line. The
fixed position of the inside chimney bracket is
the place of chimney. See Pic 2.
3.3 Fix one-way valve on the hood and connect
the extensible pipe to the one-way valve. See Pic 3.
3.4 Put the cooker hood on the hook. See Pic 4.
3.5 Use clamp to fix the T-piece valve on the extensible pipe. See Pic 5.
3.6 Fix plate on the outer chimney, and be sure that the inside chimney can be
adjusted the height in it freely, See Pic 6.
3.7 Install the chimney and screw the T-piece metal outlet to the inside chimney, See
Pic 7 and 8.
3.8 Adjust the height of the inside chimney to the position of the inside chimney
bracket and fix on it by screw, after adjusting the position, fix the body with safety
screw. See Pic 9.
Note: The two safety vents are positioned on the back casing, with diameter
of 6mm.
Home Appliances – October 2013
4
CanopyInstallationandOperationManual
Warning: Failure to install the screws or fixing device in accordance with these
instructions may result in electrical hazards
Home Appliances – October 2013
5
Loading...