Aquatic AV Harness Speaker User Manual

GUIDE TO CONNECTIONS

GUIDE TO CONNECTIONS

This guide provides an explanation of how to connect your stereo using the 12-pin wiring harness and

displays the various loudspeaker and subwoofer congurations available when using your Aquatic AV
source-unit and the 12-pin wiring harness AQ-UNH-2.

CONTENTS:

Using the Aquatic AV 12-pin Wiring Harness.................................

Using Triggered External Devices....................................................

2 Ohm & 4 Ohm Speaker Configurations........................................

2 x Speaker Wiring Configurations..................................................

4 x Speaker Wiring Configurations..................................................

6 x Speaker Wiring Configurations..................................................

8 x Speaker Wiring Configurations..................................................

3

3

4

5

6

7

8

Aquatic AV

282 Kinney Drive

San Jose, CA 95112, USA

E-mail: [e-mail]
US & Canada: 1 877 579 2782
International: [phone]
Fax: [phone]

www.aquaticav.com

Aquatic AV © 2013

GUIDE TO CONNECTIONS

Using the 12-pin Wiring Harness

Aquatic AV 12-Pin Wiring Harness

Aquatic AV supplies a ‘female’ 12-pin wiring harness (AQ-UNH-2) with each CD, DVD or Digital Media
source-unit. The female connection block on the wiring harness should be connected directly to the
‘male’ connection block on the rear of the source-unit. The 12 wires on the female wiring harness
should then be connected to speakers, battery terminals and any external device as shown below:

AQ-UNH-2 Wiring Harness (Side) AQ-UNH-2 Wiring Harness (Front)

ANTENNA / AMP TURN ON

Using triggered external devices

If your source-unit is equipped with Aquatic AV’s 12V trigger feature you can connect the blue wire of the
female wiring harness (AQ-UNH-2) to an external device such as power antenna or amplier and use your
Aquatic AV source unit to switch or ‘trigger’ the device on/off.

The 12V trigger provides an output of 12V DC, 350mA. Please ensure this is compatible with your external
device before connecting.

If you are unsure if your source-unit provides the 12V trigger feature, or if your external device will be
compatible, please contact your Aquatic AV dealer or Aquatic AV Technical Support.

Aquatic AV

282 Kinney Drive

San Jose, CA 95112, USA

E-mail: [e-mail]
US & Canada: 1 877 579 2782
International: [phone]
Fax: [phone]

www.aquaticav.com

3

Aquatic AV © 2013