APW Wyott PC-1A General Manual

Models ฀ PC-1A 120V ฀ PC-1A 240V ฀ MPC-1A 120V ฀ MPC-1A 240V

PRODUCT: QUANTITY: ITEM:

Designed Smart

Designed to Produce Maximum “Popping”!

• Kettle system is designed to transfer the optimal amount of

heat and agitation. Produces the maximum popcorn “burst”

and limits the amount of un-popped kernels.

• “Non-jamming” Agitator motor gently turns to distribute
kernels evenly over heated surface.

• Motor and controls located away from heat of kettle in
vented top part of cabinet.

• Kettle is made of heavy gauge aluminum for the most
efficient heat transfer from thermostatically controlled ring­heater.

• Produces a kettle of popcorn every 2 1/2 minutes.

• PC-1A has a capacity of up to 170 popped one-ounce

servings per hour.

• MPC-1A has a capacity of up to 130 popped one-ounce
servings per hour.

• “Popped” popcorn stays hot through an efficient system of

bottom heat provided by a heating element and top heat
provided by a heat bulb.

Easy to operate and Maintain

• Kettle heats quickly and has a fast recovery for unexpected
surges in Popcorn demand.

• Kettle is designed to require minimal labor.

• Operator can easily access kettle through double rear doors

that open wide.

• Magnetic kettle lid opens easily and closes securely,
locking in the maximum “popping heat”.

• A rotating handle allows the kettle to be single-handedly

disengaged for quick, safe and easy emptying.

• Popcorn oil and corn measuring cups provide for accurate,
profitable “popping”.

APW Wyott Design Features

• Cabinet is constructed of stainless steel and tempered
glass for maximum durability.

• Kettle is constructed of aluminum interior pan surrounded
by stainless steel and secured to cabinet through double
hung stainless steel brackets.

• Light bulb illuminates popcorn merchandising system.

APW Wyott Supporting Products

Reliability backed by APW
Wyott’s Warranty

All APW Wyott Popcorn Popper Equipment is backed by
a 1-year limited warranty and a 1-year on-site labor
warranty.

•Certified by the following agencies:

Model: MPC-1A Popcorn Popper

Heated Butter Pump

•Available with lighted
(LW-4)

• 4 quart base

•Comes with inset,

hinged cover, and ladle

Popcorn

Popper

Heated Butter Pump

•Available with lighted
(LCCW) or regular (CCW)

• 4 quart base

*Warranty does not include rock grates, cooking grates, burners shields or fireboxes.

APW Wyott Foodservice Equipment Company * 729 Third Ave., Dallas, TX 75226 Rev.081211v
[phone] * [phone] * Fax [phone] * www.apwwyott.com * [e-mail]

See reverse side for product specifications.

Models ฀ PC-1A 120V ฀ PC-1A 240V ฀ MPC-1A 120V ฀ MPC-1A 240V

PRODUCT: QUANTITY: ITEM:

PRODUCT SPECIFICATION

Construction:

Stainless steel housing, painted steel top; 3/16” tempered glass

panels; Lexan® doors and hinges.

Electrical Information:

The 120V units are equipped with at least 60”, three wire

grounded power cord which terminates with a standard three­pronged male plug. The MPC-1A 120v unit utilize a NEMA 5­15P plug, and the PC-1A 120V unit utilize a NEMA5-20P plug.

The 240V units are provided with a 60” power cord with no plug.

Plug exits from the back right corner.

Electrical Specifications:

MPC-1A: 120V, 1125W, 9.4 Amps

240V, 1125W, 4.7 Amps

PC-1A: 120V, 164.W, 13.7 Amps

240V, 1643W, 6.8 Amps

Popcorn

Popper

Overall Dimensions:

MPC-1A: 25 1/2”H x 19” W x 15 5/8”D

(65 cm x 48 cm x 39 cm)

PC-1A: 30”H x 22 1/4”W x 21 1/4”D

(76.2 cm x 56.5 cm x 54 cm)

Capacity:

MPC-1A: Up to 130 popped 1 oz. servings per hour.
Kettle holds up to 8 oz.

PC-1A: Can pop up to 170 1oz. Servings per hour.
Kettle holds up to 10 oz.

2-1/2 minute popping cycle for both models.

Shipping Weight:

MPC-1A: 68 lbs (30.8 kg)
PC-1A: 97 lbs (44 kg)

Freight Class: 125

FOB: Cheyenne WY 82007

*APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.

APW Wyott Foodservice Equipment Company * 729 Third Ave., Dallas, TX 75226 Rev.081211rv
[phone] * [phone] * Fax [phone] * www.apwwyott.com * [e-mail]