Apricorn A25-3BIO256-1000, A25-3BIO256-S512, A25-3BIO256-2000, A25-3BIO256-S128, A25-3BIO256-500 User manual
Aegis Bio 3.0
User’s Manual
Copyright © Apricorn, Inc 2012. All rights reserved.
Windows is a registered trademark of Microsoft Corporation.
All other trademarks and copyrights referred to are the property of their
respective owners.
Distribution of modied versions of this document is prohibited without
the explicit permission of the copyright holder.
Distribution of the work or derivative work in any standard (paper) book
form for commercial purposes is prohibited unless prior permission is
obtained from the copyright holder.
DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR
IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,
ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH
DISCLAIMERS ARE HELD TO BE LEGALLY INVALID
Contents
About the Aegis Bio 4
Package contents 4
Fingerprint Sensor 5
Swiping your Finger 5
Basic LED States 5
Aegis Bio - Connections 6
Before you begin 6
Connecting the Aegis Bio 6
Connecting the Aegis Bio with USB Y-Cable 7
Getting Started - Out of the Box 8
Unlocking the Aegis Bio 9
Locking the Aegis Bio 9
Complete Re-set 9
Formatting the Aegis Bio After a Complete Re-set 10
Formatting for Windows 10
Formatting for Mac 11
Enrolling a new nger 12
Hibernating, Suspending or Logging off from the OS 13
Troubleshooting 14
Technical Support 15
Warranty and RMA information 15
About the Aegis Bio
When security matters, trust your
data to the Aegis Bio.
Designed for those that demand the
highest level of protection for their
data, the Aegis Bio fuses leading
edge technology in biometric
authentication and encryption with a
rugged, portable design to produce
a truly remarkable drive.
Package contents
Aegis Bio with integrated USB 3.0 cable
Padded Travel Pouch
Auxiliary Y-USB Extension cable
Quick Start Guide
4
Aegis Bio 3.0
Swiping your Finger
To successfully swipe your nger,
start your swipe by placing your
ngertip on the downward facing
arrow at the top of the biometric
sensor. Swipe your nger in a
downward motion across the
sensor. If your swipe is successful
the GREEN LED will start to icker.
Basic LED States
Solid RED = Standby, swipe nger to unlock
Flashing RED = Error
Solid BLUE / Flashing GREEN = Ready to enroll ngerprint
Solid GREEN = Drive unlocked
Flashing GREEN = Disk activity
Quick Start Guide
LOCK RED LED
1
UNLOCK GREEN LED
2
ADMIN BLUE LED
3
ENROLL Button
4
4
Start
swipe
here
Fingerprint Sensor
Swiping your Finger
To successfully swipe your nger,
start your swipe by placing your
ngertip on the downward facing
arrow at the top of the biometric
sensor. Swipe your nger in a
downward motion across the
sensor. If your swipe is successful
the GREEN LED will start to icker.
4
1
2
3
4
LOCK RED LED
UNLOCK GREEN LED
ADMIN BLUE LED
ENROLL Button
Start
swipe
here
Basic LED States
Solid RED = Standby, swipe nger to unlock
Flashing RED = Error
Solid BLUE / Flashing GREEN = Ready to enroll ngerprint
Solid GREEN = Drive unlocked
Flashing GREEN = Disk activity
5
Loading...