Appotronics A63D User Manual

Laser Portable Projector User's Manual

English

Model：A63D

FCC ID: 2ALQL-A63D

To Users

To improve product performance, the information in this document may be updated at any time, and we will
not notify any person of such revision or changes. If there is any question about this product, please contact
Appotronics Co. Ltd., referred to as Appotronic below.

This manual is only for your reference. The manufacturer will not be responsible for the faults caused by
unauthorized operations.

Copyright © 2016 by Appotronics Co. Ltd. All rights reserved. No part of this manual may be reproduced,
transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in
any form or by any means, without the prior written permission of Appotronics Technology.

is the registered trademark of Appotronics Co. Ltd.

2

English

Table of contents

To Users ......................................................................................2

Table of contents .........................................................................3

Safety instructions ....................................................................... 4

Indoor Installation ...................................................................4

When in use ...........................................................................5

Packing list .................................................................................. 6

Projector appearance .................................................................. 7

Front .......................................................................................7

Back .......................................................................................8

Remote control .......................................................................9

Turn on/Turn off ......................................................................... 10

Home page introduction .............................................................11

System Settings ...................................................................12

Network settings ................................................................ 13

Wireless connection .......................................................... 14

WLAN hotspot ................................................................... 15

Bluetooth settings .............................................................. 16

Manual focus ..................................................................... 17

Keystone Auto correction ................................................... 18

Keystone manual correcton ............................................... 19

Image Mode ....................................................................... 20

Projection Mode ................................................................. 21

Boot source ....................................................................... 22

HDMI Mode ....................................................................... 23

Screen Saver ..................................................................... 24

Screen Scaling .................................................................. 25

Horizental Scale ................................................................ 26

Vertical Scale .....................................................................27

Proportional Scale .............................................................28

General Settings ..................................................................30

System info ........................................................................30

System upgrade ................................................................31

USB upgrade .....................................................................32

Launcher Mode ..................................................................33

Wallpaper ...........................................................................34

Language ...........................................................................35

Input methods ....................................................................36

Time Zone Selection ..........................................................37

Factory Recovery ..............................................................38

HDMI ....................................................................................39

My ofce ...............................................................................41

Multimedia ............................................................................42

NetHood ...............................................................................43

Multi-screen .........................................................................45

Remmmend App ..................................................................46

Application ...........................................................................47

Add new ...............................................................................48

3

Safety instructions

Please read this manual carefully before operating your projector, to avoid any potential accident or misuse of
the laser projector.
Safety precautions are given in two forms, i.e. Warning and Caution as detailed below.
Please read the following content, and save it for future reference.

Warning

Failure to follow the instructions may cause serious
injury and even death.

Indoor Installation

Warning

- Do not place the product in direct sunlight or near

heat sources such as radiators, res, stoves, etc.

- Do not place inammables such as ammable spray

near the product.

- Do not place the product close to sources of steam

or oil such as a humidier or kitchen counter.

- Do not use the product in a damp place, such as a
bathroom or a place exposed to the wind and rain,
where it is likely to get wet.

- Do not allow a tablecloth or curtain to block the vents.
The improper operation may cause fire or electric

shock.

4

Caution

Failure to follow the instructions may cause injury to
persons or damage to the product.

Caution

- When installing the product on a table or shelf, be
careful not to place it near the edge.

- Turn off the product, disconnect it from the power
supply and all connected apparatus before moving it.

- Do not place the product on an unstable or vibrating
surface such as a wobbly shelf or a slope.

- Do not use the third-part support bracket. This may
cause personal injury or property image.

- Please use the original AC adopter, otherwise, it
may cause product damage or electric shock.

- Do not touch the projector in working, to avoid heat injury .

English

Safety instructions

Caution

- When installing the product on a ceiling, a professional
technician should install it using the authorized tools.

When in use

Warning

- Do not place anything containing liquid on top of the

product, such as a vase, ower pot, cup, cosmetics,

or medicine; or ornaments, candles, etc.

- Do not insert pieces of metal, such as coins,

hairpins or metal debris, or ammable materials,

such as paper or matches, into the product.

- Do not look directly into the lens when the product is
in use. The strong light may damage your eyes.

- When the product is on or has just been turned off,
avoid touching the air vent because it will be very hot.

- Do not use the product near electronic devices that

generate a strong magnetic eld.

- Do not touch the product with your hand for a long
time when it is running.

- Never touch the product or power cord during
thunder or lightning.

- When you play a game by connecting a game
console to a product, it is recommended that you
maintain a distance of more than 1.5 times the
diagonal length of the screen.

Caution

- Do not touch the glass enclosure of the projector. It
will be damaged.

- Do not use any sharp tools on the product, such as
a knife or hammer, because this may damage the
casing.

- In the event that no image appears on the screen
or no sound is heard, stop using the product. Switch
off the product, unplug it from the power outlet and
contact our service center. Failure to do so may

cause re or electric shock.

- Do not drop anything onto the product or apply
heavy pressure to it. This may cause injury to
persons or the product malfunction.

- It is recommended that you maintain a distance of
more than 1.5 - 3 times the diagonal length of the
screen between your eyes and the screen.

- If you watch the screen at a close distance for a long
time, your eyesight may become worse.

5

Packing list

Carefully unpack and verify that you have all the items shown below. If any of these items is missing, please
contact your dealer immediately.

Top box

Projector

Top tray
Power adapter

Quick start guide

Warranty card

RC batteries

Power adapter

box

Remote control
Bottom tray

Bottom box

• Some of the accessories may vary from region to region.

• Accessories are subject to change without prior notice in order to improve the product performance.

• Please save the original package for future shipment.

6

English

Front

Exhaust vent

①

Rotary switch

②

Lens

③

Reector mount hole

④

Air intake vent

⑤

Power indicator

⑥

Projector appearance

① ② ⑤④③ ⑥

7

Projector appearance
Back

19V Power

①

USB1

②

USB2

③

HDMI

④

Reset key

⑤

Headphone port

⑥

① ② ⑤④③ ⑥



Note:
The output current of USB1(USB2.0) port is 1A,it
supports portable hard disk. The output current of
USB2(USB3.0) port is 0.9A, it is a HOST port, and
it supports USB2.0 and USB3.0 portable hard disk
or USB devices, but it doesn't support OTG.

8

English

①

⑥

⑧
⑨

⑩

⑦

②

③
④

⑤

⑪

Remote control

No. Description

POWER: Turn the projector on or off.

①

Arrow buttons: move and select the desired menu items and to

②

make adjustment.
RETURN: Return to the previous menu.

③

MENU/3D: Pop up menu with short press, and pop up 3D

④

control pannel with long press.

VOLUME - : Volume down.

⑤

Laser pen: Lighting when press, and turning off when move away.

⑥

ENTER: Verify current action.

⑦

HOME: Open the home page.

⑧

FOCUS: Open the focus interface.

⑨

VOLUME +: Volume up.

⑩

Indicator(blue): Splash with short press, and light with long press.

⑪



Note:

- Hold VOLUME + and VOLUME - at the same time after turn on the projector, indicator ashes blue.When
the indicator stops ashing and lights blue, the remote control and the projector are matched successfully.

- Two AAA batteries are used in the remote control.

9

Turn on/Turn off

Turn on: Connect to the power source, open the rotary switch to turn on the projector.
Turn off: There are two ways to turn off the projector.

Turn off the rotary switch, the projector will be shut down automatically after 3 seconds.

•

Press the power button on the remote control, the turn off dialog box pops up on the screen. Select "OK"

•

to turn off the projector.

After the projector is turned down, please close the rotary switch. Otherwise, it will be turned on again while
pressing the power button on the remote control.
In the event that no image appears on the screen or the projector breaks down, stop using the projector.
Please unplug the power cord, close the rotary switch, and restart the projector after 10 seconds.

10

English

Home page introduction

Home page includes two parts: Status bar and home page icons.

- Status bar: Display the web status and time. If the internet connection is failed or no internet connection, only
the time will display when starting up, but the time is not accurate and it will be update after internet
connected. Because the status information is got from the web.

- Home page icons: Normal functions. You can select icons according to their preference to perform.

Status bar

Homepage icon

Note:



There is slight difference between the user interface in this manual and the actual interface. Please subject

•

to the actual interface.

11

System Settings

Click "Settings" icon to enter system settings interface. It includes "Network", "Projection" and "General".

12

English

System settings

Network settings

Select "Network" icon, click "OK" to enter "Network" interface. You can set up "Wireless", "WLAN Hotspot",
"Bluetooth" and "VPN".

13

System settings

Wireless connection

It is used to set up wireless network.
When Wireless Switch is set to "On", the projector will search all available wireless hotspots automatically. You
can select and connect an available wireless network.

14

English

System settings

WLAN hotspot

When WLAN hotspot switch is "On", the projector itself can be used as WLAN hotspot. Now the wireless
network connection of projector is closed automatically. The default WLAN hotspot is "A63D", and you can
rename it in "SSID". There are 3 types of security: "On", "WPA PSK" and "WPA2 PSK". If the security type is
set to "On", any device could connect to this hotspot. If the security type is set to "WPA PSK" or "WPA2 PSK",
Password is required for the devices to connect to this hotspot.

15

System settings

Bluetooth settings

When Bluetooth Switch is set to "On", you can transmit all kinds of documents via bluetooth, such as texts and
audios.

16

English

Projection settings

Manual focus

You can set Manual Focus to "On" or "Off".
When Manual Focus is set to "On", the manual focus box will pop up. Toggle Left or Right key on the remote
control, to make the image be up to an optimum state.

17

Projection settings

Keystone A

correction

uto

You can set Keystone Correction to "Auto" or "Manual".
When it is set to "Auto", the projector will perform keystone correction automatically, to keep the screen
rectangle.

18

English

Projection settings

Keystone manual correcton

You can adjust the number of keystone correction, via Left and Right key on the remote control, to perform
keystone correction manually.

19

Projection settings

Image Mode

You can set Image Mode to "Highlight", "Standard" or "Custom".

20

English

Projection settings

Projection Mode

In Projection Mode item, You can set the Projection Mode of the projector, according to the positioning
methods.

21

Projection settings

Boot source

In Boot Source item, select the input signal.

22

English

HDMI Mode

You can set the HDMI mode to Auto mode, DVD mode or PC mode.

Projection settings

23

Projection settings

Screen Saver

In Screen Saver item, set the time when the screen saver start.

24

English

Screen Scaling

In Screen Scaling item, you can set the screen size to "Full", "4:3", "16:9", "21:9".

Projection settings

25

Projection settings

Horizental Scale

You can set the horizental scale from 0 to 40.

26

English

Vertical Scale

You can set the vertical scale from 0 to 40.

Projection settings

27

Projection settings

Proportional Scale

You can set the proportional scale from 0 to 40.

28

English

General settings

In General page, you can view "System Info", "System Upgrade", "USB Upgrade", and "Restore Factory
Settings". You can set "Language", "Input Method", "Wall Paper" and "Voice".

29

General Settings

System info

In System Info page, you can view "Device Name", "System Version", "Firmware Version", "Internal Storage",
etc.

30

English

General Settings

System upgrade

System upgrade online is supported. You can perform upgrade online when the new version is detected.

31

General Settings

USB upgrade

Local upgrade of USB is supported. You can download the new version of installation program to USB, and
perform local upgrade.

Note: USB upgrade doesn't support the USB device of exFAT format.

32

English

Launcher Mode

you can set Launcher Mode via Left/Right key on the remote control.

General Settings

33

General Settings

Wallpaper

You can set the wallpaper according to your preference.

34

English

General Settings

Language

You can set the display language. The projector supports 12 languages: English,German,French,Spanish,
Italian, Portuguese, Korean,Japanese, Thai and Vietnamese.

35

General Settings

Input methods

You can select the input method according to your preference.

36

English

Time Zone Selection

Select the time zone where you will operate the projector.

General Settings

37

General Settings

Factory Recovery

Restore the projector to factory settings. Please make a backup for all data before performing, to avoid data
missing.

38

English

HDMI

You can get images and voice with high quality. Connecting the HDMI input port of the projector to the HDMI
output port of the device, in the condition of connecting to the network, click "HDMI" icon, and enter HDMI input
mode.

39

HDMI

Recommended HDMI format is as follow:

HDMI signal

Resolution Vertical frequency

640*480 60Hz
720*240 60Hz
720*400 85Hz
720*480 60Hz
720*576 50Hz

56Hz
60Hz

800*600

1280*720

1024*768

73Hz
75Hz
85Hz

120Hz

24Hz
30Hz
50Hz
60Hz
43Hz
60Hz
70Hz
75Hz
85Hz

HDMI signal

Resolution Vertical frequency

60Hz

1280*1024

1280*768

1280*800

1280*960

1360*768

75Hz
85Hz

120Hz

60Hz
75Hz
85Hz
60Hz
75Hz
85Hz

120Hz

60Hz
85Hz

120Hz

50Hz
60Hz
74Hz
85Hz

120Hz

HDMI signal

Resolution Vertical frequency

60Hz

1440*900

1400*1050

1600*1200

1680*1050

1920*1080

1920*1200 60Hz

3840*2160

4096*2160 24Hz

75Hz
85Hz

120Hz

75Hz
85Hz
60Hz
65Hz
70Hz
60Hz
75Hz
24Hz
25Hz
30Hz
50Hz
60Hz

30Hz
25Hz
24HZ

Note:



- Connecting to the computer, please select the resolution in EDID, and 1280x800 is recommended.

- Damages resulted by selecting a resolution which is not supported by EDID, is not within the repair
coverage.

40

English

My ofce

Click "My Office" in homepage, and enter "My Office" interface. You can read the official documents
conveniently.

41

Multimedia

Click "Multimedia" icon, and enter "Multimedia" interface. You can view and play pictures, videos, and musics
in the mobile storage device.

There are seven items in this page: Video, Picture, Music and All Files. You can focus on a specied item via
the left and right key on remote control. Then click "Enter" key to view or play. In "All Files", you can view les,
which is the same as a le manager.

42

English

NetHood

You can view the les in the nethood of the nethood , copy les between the computer and the device.

The procedures to operate the Nethood:

1. Ensure that the IP address of the equipment and the computer are in the same segment , s uc h as 192. 16. 1. *;

2. Open the share function of the computer, you can search "Win7(XP) open network sharing" in internet;

3. Set a shared folder in the computer, pay attention that don't share the folder on the desktop,otherwise, the
folder may not be shared successfully;

4. Click "File"->"Nethood", press MENU to select "Search" or "New";

5. Click "Search" or "New" on the shared computer to view the shared directory.

43

NetHood

FAQ:

- Click "File " > "Nethood", press MENU button to select "Search",but can not search the shared computer:
Please ensure the the IP address of your device and computer are in the same segment, you can ping IP
address on the computer to
check.

- Shared computer is searched but it can not be connected to the host:
Please ensure the you have opened the network sharing function. Guest is forbidden, password protect
sharing is enable for WIN

7, sharing service is not started or local security conguration may result that the device can not visit the

shared computer. You can
search via internet: WIN 7(XP) can not visit the shared computer.

- Shared directory can not be checked in shared computer:
Please ensure the shared folder is successfully set but not on the desktop.

- R/W failed when click the shared directory:
Please ensure the shared directory exists in the computer and Everyone or Guest is added as shared user.

44

English

Multi-screen

Refer to the actions shown below, you can synchronize the required data to the screen.

You can connect a mobile or tablet to the projector via XMy.

Open "Appotronics Assistant" on the mobile or tablet, and it shows "Picture", "Audio", "Video" and "Files" in the
page. There are 3 control methods displayed on the bottom: Remote,Mouse and Push.



Remote: The mobile or tablet can be used as the remote control to control the projector.



Mouse:The mobile or tablet can be used as the mouse to control the projector.



Push: "Music"，"Picture", "Video" and "Files" on the mobile or tablet and be push to the projector.
For OS Android 5.0 or above, you can directly click Push button on the upper right to synchronize the images
on the mobile or tablet to the projector.

45

Remmmend App

When the projector is connected to internet, 5 recommend APP will appear on the Launcher for user to
download and intall.

46

English

Application

The installed application are displayed in this page. The way to download or delete applications is the same as
the tablet or mobile.

Note:



- If you install the third party application yourself, you should answer for the possible comptibility issues. It is
not within the repare coverage.

47

Add new

You can add 4 applications to the home page.
Click "Add New" icon, and enter Application interface. Select the application to be added , click "OK", and then
this application is displayed in the home page.

"Add New" is also used
to replace APP. Select
the APP to be replaced,
long press "Enter" key,
and then select the
required APP to add.

48

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.

FCC ID ：2ALQL-A63D

iOS

Appotronics Co., Ltd.

Address: 4F,SZICC, No.1089, Chaguang Road, Nanshan

District,Shenzhen 518055,China

Ofcial Website:www.appotronics.com

Service Hotline:：[phone]

Enterprise Standards：Q/GF 001-2016

Android

P/N：D04000000138_En
Version：Rev1.0