Apollo Conbraco 910FLW-LFA, 910F-LFA User Manual
910F
Class 125, Swing Check Valve
SUBMITTAL
SHEET
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO#:
Rep:
Wholesale Dist.:
DESCRIPTION
The Apollo InternationalTM Model 910F Flanged Cast Swing Check Valve provides full flow capabilities. It provides reliable and economical
protection against reverse flow. The Model 910F Swing Check Valve can be reliably installed in plumbing and heating systems (or building service
piping).
FEATURES
• Compatible with ANSI 125# &
150# Flanges
• Full Port
• Minimal Pressure Drop
• Flanged Connection
• Bolted Bonnet
• Integral Bronze Seat
APPROVALS
• MSS SP-71 - Gray Iron Swing Check
Valves Flanged and Threaded - Type 1
• ASME B16.10 - Face-to-Face and End-toEnd Dimensions of Valves
PART NUMBER MATRIX
Size
(in.)
Part
Number
2” 6SC108B1
2-1/2” 6SC109B1
3” 6SC100B1
4” 6SC10AB1
5” 6SC10BB1
6” 6SC10CB1
8” 6SC10E01
10” 6SC10G01
12” 6SC10H01
14” 6SC10J01
16” 6SC10K01
18” 6SC10M01
20” 6SC10N01
PERFORMANCE RATING
• Saturated Steam:
125 psi (8.6 Bar) at 353°F (2”-12”)
100 psi (6.9 Bar) at 338°F (14”-24”)
• Cold Working Pressure:
200 psi (13.8 Bar) at 100°F (2”-12”)
150 psi (10.3 Bar) at 100°F (14”-24”)
• Temperature Range: -20°F to 406°F max
*Valves should be in open position to allow
complete drainage during freezing conditions.
STANDARD MATERIALS LIST
BOLTS Steel (ASTM A307 B)
NAMEPLATE Aluminum
BONNET Cast Iron (ASTM A126 CL B)
BODY GASKET Graphite (Asbestos Free)
NUTS Steel (ASTM A307 B)
SIDE PLUG Brass (ASTM B16)
GASKET Graphite (Asbestos Free)
HANGER PIN Brass (ASTM B16)
HANGER
DISC RING
DISC Cast Iron (ASTM A126 CL B)
WASHER Steel (ASTM A307 B)
SPLIT PIN
SEAT RING
BODY Cast Iron (ASTM A126 CL B)
DISC NUT Steel (ASTM A307 B)
STUD BOLT Steel (ASTM A307 B)
Ductile Iron
(ASTM A536 65-45-12)
Cast Bronze (2"-6")
Cast Iron (8"-20")
Stainless Steel
(ASTM 420 S42000)
Cast Bronze (2"-6")
Cast Iron (8"-20")
* The lead free version of this valve is a running change.
Contact customer support for availabiliy.
Customer Service (704) 841-6000
www.apollovalves.com
SS1261 © 11/16 Page 1 of 2
This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion
of this specification without notice and without incurring obligation to make such changes to Conbraco products
previously or subsequently sold. Please visit apollovalves.com for the most current information.
NOT ES:
1. CO NFOR MS T O LAT EST EDI TION OF M SS SP -70.
2. FL ANGE S ME ET T HE R EQUIR EMEN TS O F ASM E/A NSI B
3. FA CE T O FA CE DIM ENS IONS CONF ORM T O AS ME/A NSI
4. CO NST RUCT ION AV AIL ABLE IN AL L IRO N.
910F
Class 125, Swing Check Valve
1
2
3
4
5
6
7
8
9
10
11
12
13
SUBMITTAL
SHEET
G
A
C
D
14
15
16
17
Size
(in.)
A B C D E F G
2" 2.00 8.00 4.75 6.00 0.62 0.75 4.41 26 132
2.5" 2.50 8.50 5.50 7.00 0.69 0.75 5.24 39 192
3" 3.00 9.50 6.00 7.50 0.75 0.75 5.67 47 298
4" 4.00 11.50 7.50 9.00 0.94 0.75 6.61 82 526
5" 5.00 13.00 8.50 10.00 0.94 0.88 7.80 124 852
6" 6.00 14.00 9.50 11.00 1.00 0.88 8.54 160 1272
8" 8.00 19.50 11.75 13.50 1.12 0.88 10.28 271 2278
10" 10.00 24.50 14.25 16.00 1.19 1.00 11.30 437 3588
12" 12.00 27.50 17.00 19.00 1.25 1.00 12.56 644 5342
14" 14.00 31.00 18.75 21.00 1.38 1.14 17.50 950 6512
16" 16.00 36.00 21.25 23.50 1.44 1.14 23.45 1160 8626
18" 18.00 36.00 22.75 25.00 1.56 1.25 27.50 1720 11488
20" 20.00 40.00 25.00 27.50 1.69 1.25 29.25 2094 14304
Cv = GPM @1 psi pressure drop, 60°F water
*Cv values are estimates only
B
Dimensions (in.)
F
E
Wt.
(lbs.)
Cv
(Typ)
Customer Service (704) 841-6000
www.apollovalves.com
SS1261 © 11/16 Page 2 of 2
This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion
of this specification without notice and without incurring obligation to make such changes to Conbraco products
previously or subsequently sold. Please visit apollovalves.com for the most current information.
Loading...