SUBMITTAL |
82-100/140 Series |
SHEET |
3-Piece Full Port Threaded Bronze Ball Valve |
|
Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO#:
Rep:
Wholesale Dist.:
DESCRIPTION
The Apollo 82-100 Series is designed as an in-line serviceable full port bronze ball valve. SAE grade body bolts and RPTFE seals are standard.
FEATURES
•Dezincification Resistant Bronze Body
•Adjustable Packing Gland
•Blowout Proof Stem Design
•Premium RPTFE Seats and Seals
•Full Port Ball Configuration in all Sizes
•100% Factory Tested
•Made in USA
PERFORMANCE RATING
•Maximum Pressure:
82-100 Series: 600 psi CWP | 150 psi SWP 82A-140 Series: 400 psi CWP | 150 psi SWP
•Maximum Temperature: 500°F
•Vacuum Service to 29 in. Hg
MODELS
•82-100 Series - Standard
•82-140 Series - 316 SS Vented Ball & Stem
APPROVALS
•MSS SP-110; Ball Valves, Threaded, SocketWelding, Solder Joint, Grooved and Flared Ends
•CSA B51 CRN: OC10908.5C
OPTIONS & SIZES
• (-01) Lever Handle (Standard) |
1/4” - 4” |
|
• |
(-02) Stem Grounded |
1/4” - 4” |
• (-04) 2-1/4” CS Stem Extension |
1/4” - 2” |
|
• (-07) Steel Tee Handle |
1/4” - 2” |
|
• (-08) 90° Reversed Stem |
1/4” - 4” |
|
• (-10) SS Lever & Nut |
1/4” - 4” |
|
• (-11) Therma-Seal™ 2-1/4” Tee Handle |
1/4” - 2” |
|
• (-14) Side Vented Ball (Uni-Directional) |
1/4” - 4” |
|
• (-15) Wheel Handle, Steel |
1/4” - 2” |
|
• |
(-16) Chain Lever-Vertical |
1/2” - 2” |
• (-18) Plain Yellow Grip |
1/4” - 2” |
|
• |
(-19) Lock Plate |
1/4” - 2”* |
• (-20) Slot Vented Ball |
1/4” - 4”* |
|
• (-21) UHMWPE Trim (Non-PTFE) |
1/4” - 4” |
|
• |
(-24) Graphite Packing |
1/4” - 4” |
• (-27) SS Latch-Lock Lever & Nut |
1/2” - 2” |
|
• (-30) Cam-Lock & Grounded |
1/4” - 1-1/4” |
|
• (-32) SS Tee Handle & Nut |
1/4” - 2” |
|
• |
(-35) PTFE Trim |
1/4” - 4” |
• (-39) SS Hi-Rise Locking Wheel |
1/2” - 1-1/4” |
|
|
Handle & Nut |
|
• (-40) Cyl-Loc & Grounded |
1/4” - 1/2” |
|
• (-45) Less Lever & Nut |
1/4” - 4” |
|
• (-46) Latch Lock Lever-Lock |
1/2” - 2” |
|
|
Closed Position Only |
|
• (-47) SS Oval Latch-Lock Handle & Nut |
1/2” - 3/4” |
|
• (-48) SS Oval Handle (No Latch) & Nut |
1/4” - 2” |
|
• |
(-49) Assembled Dry |
1/4” - 4” |
• (-50) 2-1/4” CS Locking Stem Ext. |
1/4” - 2” |
|
• (-56) MPTFE Seats and Packing |
1/4” - 4” |
|
• |
(-57) Oxygen Cleaned |
1/4” - 4” |
• |
(-58) Chain Lever-Horizontal |
3/4” - 2” |
• (-59) SS External Trim |
3/4” - 4” |
|
• (-60) Static Grounded Ball & Stem |
1/4” - 4” |
|
• (-62) Body Center Section Only |
1/4” - 4” |
|
• (-63) NPT x Solder |
3/8” - 4” |
|
• |
(-92) Balancing Stop |
1/4” - 2” |
• (-94) –04 Option & Balancing Stop |
1/4” - 2” |
|
• (-P01) BSPP (Parallel) Thread Conn. |
1/4” - 4” |
|
• (-T01) BSPT (Tapered) Thread Conn. |
1/4” - 4” |
* Options –19 & -20 are standard with 3 & 4” 82A-100 series
STANDARD MATERIALS LIST
LEVER AND GRIP |
Steel, Zinc Plated w/ Vinyl |
|
|
|
|
STEM PACKING |
MPTFE |
|
|
|
|
STEM BEARING |
RPTFE |
|
|
|
|
|
ASTM B16, Chrome Plated or |
|
BALL |
ASTM B283 (1/4" - 2-1/2") |
|
|
||
|
ASTM A276-316 SS (3" - 4") |
|
|
|
|
SEAT (2) |
RPTFE |
|
|
|
|
END CAP (2) |
B16 (1/4" & 3/8"), |
|
B584-C84400 (1/2" - 4") |
||
|
||
|
|
|
GLAND NUT |
ASTM B16 Brass |
|
|
|
|
STEM |
ASTM B16, Chrome Plated (1/4" - 2-1/2") |
|
|
||
ASTM A276-316 SS (3" - 4") |
||
|
||
|
|
|
LEVER NUT |
Steel, Zinc Plated |
|
|
|
|
BODY BOLT |
Steel, Zinc Plated |
|
|
|
|
HEX NUT |
Steel, Zinc Plated |
|
|
|
|
BODY |
B584-C84400 Bronze |
|
|
|
(704) 841-6000 apollovalves.com
SS1073 © 10/18 Page 1 of 2
This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold.
Most current information available at apollovalves.com.