NOTE S:
1. CO NFORMS TO LATEST EDITION O F MSS SP -70.
2. FLA NGES MEE T THE RE QUIREMEN TS OF ASM E/ANSI B
3. FAC E TO FAC E DIMENSIO NS CONFO RM TO AS ME/ANSI
4. CO NSTRUCTIO N AVAILA BLE IN AL L IRON.
910F-LFA
Class 125, Swing Check Valve
SUBMITTAL SHEET
DESCRIPTION
The Apollo InternationalTM Model 910F- LFA Flanged Cast Swing Check Valve provides full flow capabilities. It provides reliable and economical protection
against reverse flow. The Model 910F-LFA Swing Check Valve can be reliably installed in plumbing and heating systems (or building service piping). Valves
are MSS SP-71 compliant and include NSF lead free certifications.
LEAD FREE
Job Name:
Job Location:
Engineer:
Contractor:
Tag :
PO#:
Rep:
Wholesale Dist.:
FEATU R ES
• Compatible with ANSI 125# & 150# Flanges
• Full Port
• Minimal Pressure Drop
• Flanged Connection
• Bolted Bonnet
• Integral Bronze Seat
• FDA Food Grade Epoxy Powder Coat Finish
STANDARDS
• MSS SP-71 - Gray Iron Swing Check Valves
Flanged and Threaded - Type 1
• ASME B16.10 - Face-to-Face and End-to-End
Dimensions of Valves
APPROVALS
• NSF/ANSI 372 Lead Free
PERFORMANCE RATING
• Cold Working Pressure:
200 psi (13.8 Bar) at 100°F (2”-12”)
150 psi (10.3 Bar) at 100°F (14”-20”)
• Saturated Steam:
125 psi (8.6 Bar) at 353°F (2”-12”)
100 psi (6.9 Bar) at 338°F (14”-20”)
• Temperature Range: -20°F to 406°F Max
• NSF/AND 61 Water Quality
STANDARD MATERIALS LIST
Bolts Steel (ASTM A307 B)
1
Nameplate Aluminum
2
Bonnet Cast Iron (ASTM A126 CL B)
3
Body Gasket Graphite
4
Nuts Steel (ASTM A307 B)
5
Side Plug Cast Lead Free Bronze
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
B
G
F
E
Gasket PTFE
7
Hanger Pin Cast Lead Free Bronze
8
Hanger
9
Ductile Iron
(ASTM A536 65 -45-12)
DIMENSIONS
NUMBER
6SC1 08B1LFA 2" 2.00 8.00 4.75 6.00 0.62 0.75 4.41 26 132
6SC109B1LFA 2.5" 2.50 8.50 5.50 7. 00 0.69 0.75 5 .24 39 192
6SC1 00B1LFA 3" 3.00 9.50 6.00 7. 50 0.75 0.75 5.67 47 298
6SC10AB1LFA 4" 4.00 11.50 7.5 0 9.00 0.94 0.75 6.61 82 526
A
C
6SC1 0BB1LFA 5" 5.00 13.00 8.50 10.00 0.94 0.88 7.8 0 124 852
D
6SC10CB1LFA 6" 6.00 14.00 9.50 11.00 1.00 0.88 8.54 160 1272
6SC1 0E01 LFA 8" 8.00 19.50 11.75 13.50 1.12 0.88 10.28 271 2278
6SC1 0G01LFA 10" 10.00 24.50 14.25 16.00 1.19 1.00 11.30 437 3588
6SC10H01LFA 12" 12.00 27. 50 17. 00 19.00 1.25 1.00 12.56 644 5342
6SC1 0J 01LFA 14" 14.00 31.00 18.75 21.00 1.38 1.14 17. 50 950 6512
6SC1 0K01LFA 16" 16.00 36.00 21.25 23.50 1.44 1.14 23.45 1160 8626
6SC10M01LFA 18" 18.00 36.00 22.75 25.00 1.56 1.25 27.50 1720 11488
6SC10N01LFA 20" 20.00 40.00 25.00 27. 50 1.69 1.25 29.25 2094 14304
Cv = GPM @ 1 psi pressure drop, 60°F water
*Cv values are estimates only
**LFA models replace LF models
PART
SIZE
(IN.)
Disc Ring
10
Disc Cast Iron (ASTM A126 CL B)
11
Washer Steel (ASTM A307 B)
12
Split Pin Stainle ss Steel (ASTM 420 S 42000)
13
Seat Ring
14
Body Cast Iron (ASTM A126 CL B)
15
Disc Nut Steel (ASTM A307 B)
16
Stud Bolt Steel (ASTM A307 B)
17
DIMENSIONS (IN.)
A B C D E F G
*LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law 111-380 . ANSI 3rd party approved and listed.
Cast Lead Free Bronze (2”- 6”)
Cast Iron (ASTM A126 CL B) (8”-20”)
Cast Lead Free Bronze (2"- 6")
Cast Iron (ASTM A126 CL B) (8"-20")
WT.
(LB.)CV(TYP)
(704) 841-6000
apollovalves.com
SS1434 © 07/18 Page 1 of 1
This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without
notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold.
Most current information available at apollovalves.com.
Loading...