Apollo Conbraco 88A-200 User Manual
88A-200 SERIES
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE
1/2” THRU 1”
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3.
STANDARD MATERIAL LIST
PART MATERIAL
Body ASTM A216 WCB
1
Retainer ASTM A108 Type 1215
2
Ball ASTM A108 Type 1215 Chrome Plated
3
Stem ASTM A108 Type 1215
4
Packing Gland ASTM A108 Type 1215
5
Stem Seals PTFE
6
Seats TFM 1700
7
Gland Screws ASTM A193 B7
8
Gland Plate 302 or 304 Stainless Steel
9
Stem Nut 316 Stainless Steel
10
Lever ASTM A366 Steel with Vinyl Grip
11
Stem Bearing RPTFE
12
Stop ASTM A108 Type 1215
13
Stop Screw SAE J429 Grade 2
14
Lock Plate ASTM A366 Steel
15
Body Seal RPTFE
16
Lockwasher 302 or 304 Stainless Steel
17
Grounding Spring Stainless Steel
18
ACTUATOR MOUNTING
VAR IATIONS AVAILAB LE
• 88A-240 Series (316 Stainless Steel Ball & Stem)
• 88A-230 Series (Ni-Cu Ball & Stem)
OPTIONS AVAILABLE
(MORE INFORMATION IN SECTION J)
• Minimum quantities apply.
• To specify an optio n, replace the “ 01” st andard sux wi th the sux of the option.
• To specify multip le optio ns, replace th e “01” s ux with t he desired su xes in the
numer ical or der shown below. N OTE: Not a ll suxe s can be combined toget her.
(SUFFIX) OPTION
-01 Standard Configuration
-04- 2-1/4” Stem Extension (Carbon Steel, Zinc Plated)
-10- Stainless Steel Lever and Nut
-14- Side Vented Ball (Uni- Direc tional). Not Available with Plated CS Ball
-15- Wheel Handle, Steel
-21- UHMWPE Seats
-24-
-26-
-35- PTFE Seats and Seals
-38- PEEK Seats and Graphite Packing
-49- No Lubrication. Assembled Dr y
-65- MPTFE Seats and Graphite Packing (Fire Safe)
-67- Cleaned for Industrial Gases
-69- Drilled and Tapped Purge Port with Plug
-70- 4” Extended Bonnet
-73 - 316 Stainless Steel Spiral Wound Gaskets with PTFE Filler
-76- Live Loaded (Lever)
-77- Live Loaded (Gear, Actuator)
TFM 1600 Seats , PTFE Chevron Packin g, Spiral Wound PTFE Body Seal, PEEK Bearing
-80-
-82- Flat Face Flanges
-90- Double Packed 4” Ex tended Bonnet
-9P- Double Packed 4” Ex tended Bonnet with Monitoring Port
-CE- CE Marking. See Page D-3 “Product Approvals” for Availability
-EF- Graphite Packing (API 641 Compliant) (Not Available on 1/2” Size)
-EP-
-KF- PCTFE Stem Bearing
-TC- With Test Certificate
-TD - Tested to API Spec 6D
-UA- AIS (American Iron & Steel) Compliant
- U L- UL & CSA Listed (with Markings)
-ZP1 - Fugitive Emissions Packing (Viton)
-ZP2 - Fugitive Emissions Packing (Buna-N)
-ZP3- Fugitive Emissions Packing (Kalrez)
Graphite Packing, Spiral Wound Graphite Body Seal,
RPTFE Bearing (API 607, 5th Edition, ISO 10497-5:2004)
Chlorine Service. Vented. Special Cleaning. Assembled Dry.
(for CS, Hastelloy and Ni-Cu Valves. Ball Must be Hastelloy or Ni-CU)
Garlock EVSP Stem Packing with Spiral Wound
Graphite Gasket (Fire Safe by Design)
Pressure/Temperature Ratings - Page M-9, Graph No. 1
DIMENSIONS
PART NO. SIZE A B C D E F G H I J K L M WT.
88A-203-01A 1/2” 0.50 4.25 2.06 2.74 5.12 0.24 1.09 1.44 1.002 0.501 0.375 0.245 10 -24 5
88A-204-01A 3/4” 0.75 4.62 2.18 3.43 5.54 0.22 1.65 2.13 1.392 0.696 0.500 0.312 1/4-2 0 6
88A-205-01 1” 1.00 5.00 2.32 4.62 6.53 0.47 1.62 2.15 1.392 0.696 0.500 0.287 1/4 -20 7
Customer Service (704) 841-6000 industrial.apollovalves.com D-59
REV. 10SEP19
88A-200 SERIES
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE
1-1/2” THRU 2-1/2”
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3.
STANDARD MATERIAL LIST
PART MATERIAL
Body ASTM A216 WCB
1
Retainer ASTM A216 WCB
2
Ball
3
Stem ASTM A108 Type 1215
4
Packing Gland ASTM A108 Type 1215
5
Stem Seals PTFE
6
Seats TFM 1700
7
Gland Screws ASTM A193 B7
8
Gland Plate 302 & 304 Stainless Steel
9
Stem Nut ASTM A194 Grade 8l
10
Lever ASTM A366 Steel with Vinyl Grip
11
Stem Bearing RPTFE
12
Stop ASTM A108 Type 1215
13
Stop Screw SAE J429 Grade 2
14
Lock Plate ASTM A366 Steel
15
Body Seal RPTFE
16
Grounding Spring Stainless Steel
17
Body Joint Stud ASTM A193 Grade B7
18
Body Joint Nut ASTM A194 Grade 2H
19
Lockwasher 302 or 304 Stainless Steel
20
ASTM A108 Type 1215 or
ASTM A216 WCB Chrome Plated
ACTUATOR MOUNTING
DIMENSIONS
PART NO. SIZE A B C D E F G H I J K L M WT.
88A-207-01 1-1/2” 1.50 6.50 3.00 4.62 6.65 0.72 2.41 3.09 1.949 0. 974 0.625 0.412 5/16-18 14
88A-208-01 2” 2.00 7. 00 3.04 5.61 8.41 0.80 3.31 4.08 1.949 0 .9 74 0.750 0.477 5/16-18 25
88A-209-01 2-1/2” 2.50 7.5 0 3.34 6 .24 8.41 0.80 3.94 4.71 1.949 0 .974 0.750 0.477 5/16-18 30
REV. 18JUL19
VAR IATIONS AVAILAB LE
• 88A-240 Series (316 Stainless Steel Ball & Stem)
• 88A-230 Series (Ni-Cu Ball & Stem)
OPTIONS AVAILABLE
(MORE INFORMATION IN SECTION J)
• Minimum quantities apply.
• To specify an optio n, replace the “ 01” st andard sux wi th the sux of the option.
• To specify multip le optio ns, replace th e “01” s ux with t he desired su xes in the
numer ical or der shown below. N OTE: Not a ll suxe s can be combined toget her.
(SUFFIX) OPTION
-01 Standard Configuration
-04- 2-1/4” Stem Extension (Carbon Steel, Zinc Plated)
-10- Stainless Steel Lever and Nut
-14- Side Vented Ball (Uni- Direc tional). Not Available with Plated CS Ball
-15- Wheel Handle, Steel
-21- UHMWPE Seats
-24-
-26-
-35- PTFE Seats and Seals
-38- PEEK Seats and Graphite Packing
-49- No Lubrication. Assembled Dr y
-59- Stainless Steel External Trim
-65- MPTFE Seats and Graphite Packing (Fire Safe)
-67- Cleaned for Industrial Gases
-69- Drilled and Tapped Purge Ports with Plugs
-70- 4” Extended Bonnet
-73 - 316 Stainless Steel Spiral Wound Gaskets with PTFE Filler
-76- Live Loaded (Lever)
-77- Live Loaded (Gear, Actuator)
-80-
-82- Flat Face Flanges
-90- Double Packed 4” Ex tended Bonnet
-9P- Double Packed 4” Ex tended Bonnet with Monitoring Port
-CE- CE Marking. See Page D-3 “Product Approvals” for Availability
-EF- Graphite Packing (API 641 Compliant)
-EP-
-KF- PCTFE Stem Bearing
-MG- Gear Operator with Standard Handwheel
-MH- Gear Operator with Standard Handwheel & Locking Device
-MJ- Gear Operator with Oversize Handwheel
-MK- Gear Operator with Oversize Handwheel & Locking Device
-TC- With Test Certificate
-TD - Tested to API Spec 6D
-UA- AIS (American Iron & Steel) Compliant
- U L- UL & CSA Listed (with Markings)
-ZP1 - Fugitive Emissions Packing (Viton)
-ZP2 - Fugitive Emissions Packing (Buna-N)
-ZP3- Fugitive Emissions Packing (Kalrez)
Chlorine Service. Vented. Special Cleaning. Assembled Dry.
(for CS, Hastelloy and Ni-Cu Valves. Ball Must be Hastelloy or Ni-CU)
TFM 1600 Seats , PTFE Chevron Packin g, Spiral Wound PTFE Body Seal, PEEK Bearing
Pressure/Temperature Ratings - Page M-9, Graph No. 1
Fire Safe - Graphite Packing & Seals
(API 607, 5th edition, ISO 10497-5:2004) 1-1/2” & 2”
(API 607, 6th edition, ISO 10497:2010) 2-1/2”
Garlock EVSP Stem Packing with Spiral Wound
Graphite Gasket (Fire Safe by Design)
Customer Service (704) 841-6000 industrial.apollovalves.comD-60
88A-200 SERIES
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE
3” THRU 6”
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3.
STANDARD MATERIAL LIST
PART MATERIAL
Body ASTM A216 WCB
1
Retainer ASTM A216 WCB
2
Ball
3
Stem ASTM A108 Type 1215
4
Packing Gland ASTM A108 Type 1215
5
Stem Seals PTFE
6
Seats TFM 1700
7
Gland Screws ASTM A193 B7
8
Gland Plate 316 Stainless Steel
9
Adapter Screw 316 Stainless Steel
10
Handle Adapter ASTM A366 Steel with Vinyl Grip
11
Stem Bearing RPTFE
12
Stop ASTM A108 Type 1215
13
Stop Screw SAE J429 Grade 2
14
Lock Plate ASTM A366 Steel
15
Body Seal RPTFE
16
Grounding Spring Stainless Steel
17
Body Joint Stud ASTM A193 Grade B7
18
Body Joint Nut ASTM A194 Grade 2H
19
Pipe Handle Galvanized Steel (not shown)
20
ASTM A108 Type 1215 or
A216 WCB Chrome Plated
ACTUATOR MOUNTING
VAR IATIONS AVAILAB LE
• 88A-240 Series (316 Stainless Steel Ball & Stem)
• 88A-230 Series (Ni-Cu Ball & Stem)
OPTIONS AVAILABLE
(MORE INFORMATION IN SECTION J)
• Minimum quantities apply.
• To specify an optio n, replace the “ 01” st andard sux wi th the sux of the option.
• To specify multip le optio ns, replace th e “01” s ux with t he desired su xes in the
numer ical or der shown below. N OTE: Not a ll suxe s can be combined toget her.
(SUFFIX) OPTION
-01 Standard Configuration
-14- Side Vented Ball (Uni- Direc tional). Not Available with Plated CS Ball
-21- UHMWPE Seats
-24-
-26-
-35- PTFE Seats and Seals
-38- PEEK Seats and Graphite Packing
-49- No Lubrication. Assembled Dr y
-59- Stainless Steel External Trim
-65- MPTFE Seats and Graphite Packing (Fire Safe)
-67- Cleaned for Industrial Gases
-69- Drilled and Tapped Purge Port with Plug
-70- 4” Extended Bonnet
-73 - 316 Stainless Steel Spiral Wound Gaskets with PTFE Filler
-76- Live Loaded (Lever)
-77- Live Loaded (Gear, Actuator)
TFM 1600 Seats , PTFE Chevron Packin g, Spiral Wound PTFE Body Seal, PEEK Bearing
-80-
-82- Flat Face Flanges
-90- Double Packed 4” Ex tended Bonnet
-9P- Double Packed 4” Ex tended Bonnet with Monitoring Port
-CE- CE Marking. See Page D-3 “Product Approvals” for Availability
-EF- Graphite Packing (API 641 Compliant)
-EP-
-KF- PCTFE Stem Bearing
-MG- Gear Operator with Standard Handwheel
-MH- Gear Operator with Standard Handwheel & Locking Device
-MJ- Gear Operator with Oversize Handwheel
-MK- Gear Operator with Oversize Handwheel & Locking Device
-TC- With Test Certificate
-TD - Tested to API Spec 6D
-UA- AIS (American Iron & Steel) Compliant
- U L- UL & CSA Listed (with Markings)
-ZP1 - Fugitive Emissions Packing (Viton)
-ZP2 - Fugitive Emissions Packing (Buna-N)
-ZP3- Fugitive Emissions Packing (Kalrez)
Graphite Packing, Spiral Wound Graphite Body Seal,
RPTFE Bearing (API 607, 6th Edition, ISO 10497:2010)
Chlorine Service. Vented. Special Cleaning. Assembled Dry.
(for CS, Hastelloy and Ni-Cu Valves. Ball Must be Hastelloy or Ni-CU)
Garlock EVSP Stem Packing with Spiral Wound
Graphite Gasket (Fire Safe by Design)
Pressure/Temperature Ratings - Page M-9, Graph No. 1
DIMENSIONS
PART NO. SIZE A B C D E F G H I J K L M WT.
88A-200-01 3” 3.00 8.00 3.68 8.80 3.88 0.50 4.75 5.95 2.840 1.420 1.250 0.725 3/8-16 60
88A-20A-01 4” 4.00 9.00 3.94 9.99 5.13 0.50 5.94 7.13 2.840 1.420 1.250 0.725 3/8-16 91
88A-20C-01 6” 6.00 15.50 7.1 9 13.73 7. 00 1.00 7.75 9.48 4.596 2.298 2.000 1.375 3/4-10 248
REV. 18JUL19
Customer Service (704) 841-6000 industrial.apollovalves.com D-61
Loading...