QS SERIES Snap-in Panel Mount LED Indicators
Distinctive features and specifications
Features
VOYC1511US
• 6mm, 8mm, 10mm and 12mm
Ø cut-out sizes
• Front panel snap-in mounting requires no additional hardware
• Colored diffused flat lenses
Red, Green, Yellow, Blue, Orange, White (clear)
•
• 2VDC – 220VAC
• 6mm solder lug (2.0x0.5mm) or 200mm wire terminations
•
8mm, 10mm, 12mm solder lug/Faston (2.8x0.8mm) or 200mm wire terminations
•
Standard intensity diffused LED or high brightness LED for daylight viewing
Bi-color and Tri-Color (8 and 10mm only) options
•
NB: UL Recognized Component
TECHNICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
02 (No Resistor) 1.8 to 2.5VDC 20mA max*
6VDC 5.4 to 6.6VDC 20mA
Max Reverse Voltage: 5V
Viewing Angle: 30–100° (dependant on model)
Life Expectancy: 100,000 hours
Operating Temperature Range: –40 to +85°C
12VDC 10.8 to 13.2VDC 20mA
24VDC 21.6 to 26.4VDC 20mA
28VDC 25.2 to 30.8VDC 20mA
110VAC (not available on QS6)
220VAC (not available on QS6)
99 to 110VAC
207 to 253VAC
6mA
3mA
Standard LED 6mm Intensity
8,10 & 12mm Intensity
Forward Voltage
(all voltages)
HE Red
Green
Yellow
Blue
White(clear)
Orange
Bi-color (Typical) (Red/Green)
Tri-color (Typical) (Red/Green/Yellow)
40mcd
40mcd
30mcd
1,200mcd
1,200mcd
60mcd
20/15mcd
_
100mcd
60mcd
50mcd
1600mcd
1600mcd
45mcd
30/12mcd
60/15/13mcd
2.0V
2.2V
2.1V
3.8V
3.8V
2.0V
2.0V/2.2V
2.5V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
High Brightness Forward Voltage
HE Red
Green
Yellow
Orange
Luminous intensity will be reduced with lower operating current.
6mm Intensity
(all voltages)
3,700mcd
2,000mcd
1,200mcd
4,500mcd
8,10 & 12mm Intensity
6,000mcd
1,900mcd
2,100mcd
4,500mcd
2.2V
3.2V
2.0V
2.2V
Note: The operating voltage must not be exc eeded by more that 10% a s thi s will result in reduced life expectancy.
The company reserves the right to ch ange specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous i ntensity i s measured at 20mA on a discrete LED unless otherwise stated.
Luminous i ntensities and color shades of white LEDs may vary within a batch .
APEM
www.apem.com
1
APEM
Ø6mm
QS SERIES Snap-in Panel Mount LED Indicators
Technical Drawings
Solder lug
Wires
Ø8mm
GOLD TAB ANODE +
2,0x0,5 FASTON TAB
7,20 0,283
1,34 0,053
19,00 0,748
10,00 0,394
1,50 0,059 26,50 1,043
25,00 0,984
SILVER TAB CATHODE -
GOLD TAB ANODE +
2,8x0,8 FASTON TAB
36,50 1,437
SILVER TAB CATHODE -
5,90 0,232
Solder lug/Faston
7,90 0,311
9,35 0,368
RED WIRE ANODE +
BLACK WIRE CATHODE -
7,20 0,283
1,34 0,053
19,00 0,748
RED WIRE ANODE +
BLACK WIRE CATHODE -
10,00 0,394
1,50 0,059 26,50 1,043
5,90 0,232
200,0 +/-10
[7.874 +/- 0.393]
Wires
7,90 0,311
200,0 +/-10
[7.874 +/-0.393]
Ø10mm
Ø12mm
GOLD TAB ANODE +
2,8x0,8 FASTON TAB
12,00 0,472
1,75 0,069
GOLD TAB ANODE +
2,8x0,8 FASTON TAB
14,00 0,551
26,50 1,043
36,50 1,437
SILVER TAB CATHODE -
26,50 1,0432,00 0,079
36,50 1,437
SILVER TAB CATHODE -
Solder lug/Faston
9,85 0,388
9,35 0,368
Solder lug/Faston
11,85 0,467
9,35 0,368
RED WIRE ANODE +
BLACK WIRE CATHODE -
12,00 0,472
1,75 0,069 26,50 1,043
RED WIRE ANODE +
BLACK WIRE CATHODE -
14,00 0,551
2,00 0,079
26,50 1,043
Wires
9,85 0,388
200,0 +/-10
[7.874 +/-0.393]
Wires
11,85 0,467
200,0 +/-10
[7.874 +/-0.393]
2
www.apem.com
QS SERIES Snap-in Panel Mount LED Indicators
Order Overview
STANDARD OPTIONS
The QS Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
QS 8
SERIES TERMINALS
QS
MOUNTING
HOLE
6 = Ø6mm
8 = Ø8mm
10 = Ø10mm
12 = Ø12mm
3
1 = Solder lug/
faston
3 = Wires
Example QS83XXR220
Ø8mm mounting hole with wire terminations
fixed light, Red 220VAC
XX
TYPE OF
ILLUMINATION
XX = Fixed light
YY = Bi-color
ZZ = Tri-color
(10mm only)
KK = Flashing light
(12 - 28VDC)
R
LED COLOR
R = Red
G = Green
Y = Yellow
B = Blue
W = White (clear)
O = Orange
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
RG = Red/Green
RYG = Red/Yellow/Green
(10mm Only)
220
VOLTAGE
02 = no resistor*
06 = 6VDC
12 = 12VDC
24 = 24VDC
28 = 28VDC
110 = 110VAC
220 = 220VAC
• Gold solder lug/Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, QS6 & QS8 24AWG UL1061, QS10 & QS12 22AWG UL1061,
red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternate voltages consult APEM
• Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC
• Take care when soldering to the Faston terminals (recommended solder temperature 270°C - 2 sec)
The Tri-color LED has red and green LEDs when both are connected
•
•
Maximum panel thickness 11mm
•
We recommend using high brightness LEDs for use at 220VAC
For multi-voltage options please consult APEM
•
* = For resistorless versions (02) please refer to the forward voltage on page 1
yellow is produced
4
www.apem.com
APEM
Loading...