APEM A01 User Manual

G-10 APEM www.apem.com

A01 series

Emergency stop switches

Panel cut-out Ø 16 (.630)

G

60 mm Ø Self

Adhesive Label

• Prominent 24 mm (.944) dia. or optional 40 mm (1.575) dia. red mushroom actuator

• Highly reliable positive break switch

• Push to shut off switch, twist to reset to ON

• Approved to UL 1054 / EN 60947-5-1

An emergency stop switch assembly requires : operator + switch block.

To order, specify with single pole or double pole positive break switch block.

Operator Switch block

Accessory

❶

❷

General specifications

• Min. mechanical life : 6.050 cycles (6 cycles per minute)

• Operating force / torque : 16 N / 0,1 Nm

• Operating temperature : -20°C to +55°C

• Solder heat resistance : 350°C, 5 secs (IEC 68-2-2-20Tb, method 2)

• Degree of environmental protection (IEC 529) :
IP65 front of panel, IP40 back of panel

• Switch terminals : solder/quick-connect 2,8 mm (.110) (IEC 68-2-20)

Electrical specifications

• Current/voltage rating :
1,5A 250VAC AC-15

• Contact gap : > 3 mm (.118)

• Dielectric strength : 2.900V

• Electrical life : 6.050 cycles

Option : SP3 version

No of poles Part No

Single pole A0150BUL
Double pole A0154BUL

Description Part No

24 mm Ø Emergency stop A01ES
40 mm Ø Emergency stop A01ES SP3

Description Part No

Yellow label with text A01YL1
Yellow label A01YL2

N.C.

19.0042.00

(1.654) (1.047)

12.00
(.472)

15.30

(.602)

Ø24.00

(.945 DIA)

8.40

(.330)

CD

Ø40.00

18.00
(.709)

0.50

(.020)

2.80

(.110)

18.00
(.709)