Page 1
APC Easy UPS 1 Ph SMV Series
Ensuring Performance and Reliability
For IT professionals in small to medium businesses, APC™ by
Schneider Electric delivers a new UPS category designed for the
essential power protection needs even in the most unstable power
conditions, introducing the APC Easy UPS 1 Ph Line Interactive with
Sinewave.
APC Easy UPS 1 Ph Line-Interactive with Sinewave is a versatile UPS
developed to handle a wide voltage range, and inconsistent power
conditions with pure sinewave output on battery backup power.
Delivering the quality millions of IT professionals trust around the world.
That’s Certainty in a Connected World.
www.apc.com
Page 2
APC Easy UPS 1 Ph SMV Series Standard Features
Power Factor
More real output power with 0.7 Pf
Pure Sinewave
A pure form of sinewave designed to emulate utility power, will
support your device upon batter y backup
Generator Compatible
Provides the ability to adapt the UPS for optimal performance in
specific power environments or generator applications
LCD Display
Intuitive interface provides detailed and accurate information at
a glance
Rugged Metal Construction
Easy UPS SMV is built with resilient sheet metal that rigidly
holds and protects critical electrical components
Automatic Voltage Regulation
Automatically steps up low voltage and steps down high voltage
to levels that are suitable for your equipment
Generous Number of Outlets
6 battery backup and surge protected outlets are included
across all SMV Easy UPS
Battery Connector
A convenient way to disconnect the battery for transport
Dry contact port and intelligent slot
Provides dry contact signals for remote UPS monitoring.
Intelligent Slot also available to add a management card (sold
separately) to enable remote UPS monitoring
Safety Agency Approved
Ensures the product has been tested and approved to work
safely with the connected service provider equipment and
within the specified environment
Page 3
Easy UPS Remote Management Solution
Enable monitoring and control with an additional purchase
APV9602
• Provides SNMP MIB to monitor and control your UPS
• Auto-senses 10M/100M/1000M Fast Ethernet Manage and
configure via Web Browser or NMS
• Supports TCP/IP, UDP, SNMP, HTTPS, SMTP, FTPS
Protocols
• Supports SSL/TLS, Encryptions
• Provides easy setup and upgrade tools via Easy UPS LI
SNMP Manager software
• Sends SNMP TRAP; e-mail for events notification
• E-mails daily UPS history report
• Performs graceful shutdown via Easy UPS Line Interactive
Shutdown software
Page 4
Technical Specifications
UPS Model SMV750CAI SMV1000CAI SMV1500CAI
Output
Output Power Capacity 525 W / 750 VA 700 W / 1000 VA 1050 W / 1500 VA
Nominal output voltage 230 V
Output Frequency (Batt. Mode) 50 Hz or 60 Hz ± 1 Hz
Topology Line Interactive
Output Waveform Sinewave
Transfer Time 2 – 6ms typical
Output Connections (6) IEC C13
Input
Input Voltage Options 220, 23 0, 240 VAC
Nominal Input voltage 230 VAC
Input frequency 50/60 Hz (auto sensing)
Input Voltage Range 165-290 VAC ± 5 VAC
Input Connection IEC C14
Battery
Ba t ter y Type Maintenance-free sealed lead-acid battery
Typical recharge time 4-6 hours recover to 9 0% capacity
Runtime at Full Load > 2mins 30secs > 2mins 30secs > 2mins 30secs
Battery Connector Yes
Communication and Management
USB Por t Suppor ts Windows® W indows 7 / Server 2012 / 10 / Server 2016
RS-232 Yes
Dry Contact Yes
Intelligent Slot Yes
LCD Display
Physical
Dimensions (DxWxH) (mm) 410 x 160 x 220
Net weight (kg.) 13.6 13.6 17.8
Conformance
Regulatory Approvals CE
Warrant y 2 years
AC Mode, AVR Mode, Battery Mode, Battery Level, Load Level, Input Voltage, Output Volt age, System Error,
Battery Malfunction
Page 5
Technical Specifications
UPS Model SMV2000CAI SMV3000CAI
Output
Output Power Capacity 1400 W / 20 00 VA 2100 W / 3000 VA
Nominal output voltage 230 V
Output Frequency (Batt. Mode) 50 Hz or 60 Hz ± 1 Hz
Topology Line Interactive
Output Waveform Sinewave
Transfer Time 2 – 6ms typical
Output Connections (6) IEC C13
Input
Input Voltage Options 220, 230, 240 VAC
Nominal Input voltage 23 0 VAC
Input frequency 50/60 Hz (auto sensing)
Input Voltage Range 165-295 VAC ± 8 VAC
Input Connection IEC C14 IEC C20
Battery
Ba t ter y Type Maintenance-free sealed lead-acid battery
Typical recharge time 4- 6 hour s recover to 90% capacity
Runtime at Full Load > 2 mins 30 secs > 2 mins 30 secs
Battery Connector Yes
Communication and Management
USB Por t Supports Windows® Windows 7 / Ser ver 2012 / 10 / Ser ver 2016
RS-232 Yes
Dry Contact Yes
Intelligent Slot Yes
LCD Display
Physical
Dimensions (DxWxH) (mm) 455 x 180 x 240
Net weight (kg.) 23.5 25.2
Conformance
Regulatory Approvals CE
Warrant y 2 years
AC Mode, AVR Mode, Battery Mode, Battery Level, Load Level, Input Voltage, Output Volt age, System Error,
Battery Malfunction
Page 6
132 Fairgrounds Rd
West Kingston, RI 02892
Phone: + 01 (401) 789-5735
www.apc.com
© 2019 Schneider Electric. All Rights Reserved. Schneider Electr ic I Life Is On, APC, and PowerChute are trademarks and the property of Schneider Electric SE, its
subsidiaries, and af filiated companies. All other tr ademar ks are the property of the respective owners.
Loading...