APC SUVTRF30KH User Manual
Smart-UPS® VT ISX
See also
See also
Receiving and Unpacking Guide
2
Dimensions and Weights
Safety Instructions are described in the General Safety sheet
shipped with the UPS (in the documentation storage shelf
behind the front cover).
The UPS has castors making it easy to move to the installation
site. If the UPS needs to moved over a long distance, we
Note
Dimensions
UPS dimensions in mm
Height 78.4 1992
Depth 43.1 1095
Width 23.6 600
Shipping weights
recommend that you use a pallet jack to move the UPS (while
it is still on the pallet).
3
Inspection
External inspection
While the shipment is still on the pallet, inspect the shipping material for
any signs of damage or mishandling. Do not attempt to install the system
if damage is apparent. If any damage is noted, file a damage claim with
the shipping agency within 24 hours, and contact APC Technical Support
to inform of the damage claim and the condition of the shipment.
Compare the components of the shipment with the bill of lading. Report
any missing items to the carrier and to APC Customer Support
immediately.
Verify that labelled shipments match the order confirmation.
1
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This guide contains important instructions that should be followed when
handling the UPS.
Symbol introduction
Indicates important information.
Note
Indicates a heavy load that should not be lifted without
assistance.
UPS SKU No. Range lbs kg
SUVTRF30KH 400 V 738 335
SUVTRF40KH 400 V 738 335
SUVTRF30KB5H 400 V 738 335
SUVTRF40KB5F 400 V 738 335
SUVTRF20KB5F 208 V 844 383
SUVTRF30KB5F 208 V 844 383
SUVTRF20KB5F 208/208 V 1289 585
SUVTRF30KB5F 208/208 V 1289 585
SUVTRF20KB5G 480/208 V 1289 585
SUVTRF20KB5G 480/208 V 1289 585
SUVTRJ20KB5F 200/208 V 1327 602
SUVTRJ30KB5F 200/208 V 1327 602
Battery Module (consisting of 4 Battery Units). Shipping separately
4 x 52.8 lbs 4 x 24 kg
4
Move to Installation Site
With the system on the pallet, use a pallet jack to move to the installation
site.
Indicates that more information is available on this subject in a
different section of this manual.
990-2821A-001 01/2006
*990-2821*
Smart-UPS® VT and XR Battery Enclosure Receiving and Unpacking Guide
5
Removal of Packaging
If the system has to go into storage prior to installation, do not
remove the packaging now. APC recommends to store the
Note
system in an indoor, temperature-controlled area, free of
conductive contaminants until the time of the installation.
Remove plastic
to free the
ramp. Cut
carefully along
the edges.
Two people to
roll Enclosure
from pallet.
7
Contact Information
If a problem occurs, phone (1)(800)800-1272 (toll-free) for U.S./Canada,
or contact our Ireland office at +353 91 70 2000 (Europe, Middle East,
Africa) or go to Web Support: support@apc.com. For country-specific
centers: go to www.apc.com/support/contact.
Remove
cardboard
cover.
Remove
bolts from
the two
brackets
attaching
the
Enclosure to
the pallet
(one at the
front and
one at the
back.
Remove
corner
protection
and plastic
bag.
Place ramp,
aligning velcro
strips on ramp
with velcro
strips on front
edge of pallet.
6
Documentation Storage
.
Documentation
storage
Smart-UPS® VT and XR Battery Enclosure Receiving and Unpacking Guide
Smart-UPS® VT and XR Battery Enclosure Receiving and Unpacking Guide
Loading...